There are still some problems with version 16.10.14.

When I extract an archive (RAR) via shell then the first extracting file still isn’t displayed.

Next thing is that, when extracting via main window, the extraction can’t be canceled. When I click on the cancel button and then on “no” PA keeps extracting. After that the cancel button doesn’t work anymore. And if I click on the cancel button while the extraction is paused then the extraction will be continued.

Couldn’t find mine… and totally forgot to look in the Junk folder. Duh! Thanks for the reminder. So obvious. :rolleyes:

Hi Brian,

We’ve just tested two files, a 170mb file and a 1GB file, via Compress to 7z and Compress w options>7z
Compression profile changed to LZMA2 Ultra.
Also tried with LZMA Ultra.

In both cases, both files resulted in same file size of the compressed 7z file.
Seems fixed.

If you happen to come across a specific situation where the issue seems present, please let us know and we’ll test immediately.

Thanks!

thanks for your update
i updated the 16.10.12 in to my website: http://orignalsoft.com/powerarchiver/

We have created a debug version of Patchbeam for PowerArchiver.
Here it is;

http://www.powerarchiver.com/test/release16/patchbeam-debug.7z

Inside the 7z file is patchbeam.exe, please replace it with the standard Patchbeam.exe that is located in one the following folders

C:\Program Files (x86)\PowerArchiver\PatchBeam
or
C:\Program Files\PowerArchiver\PatchBeam

Once error appears, there should be a full logging system in there. You will be able to email us a full log (copy to clipboard for instance) with all the info for us to trace the error).

You can email it to support at conexware dot com

Thanks for your help!

We have created a debug version of Patchbeam for PowerArchiver.
Here it is;

http://www.powerarchiver.com/test/release16/patchbeam-debug.7z

Inside the 7z file is patchbeam.exe, please replace it with the standard Patchbeam.exe that is located in one the following folders

C:\Program Files (x86)\PowerArchiver\PatchBeam
or
C:\Program Files\PowerArchiver\PatchBeam

Once error appears, there should be a full logging system in there. You will be able to email us a full log (copy to clipboard for instance) with all the info for us to trace the error).

You can email it to support at conexware dot com

Thanks for your help!

Hey Mili
thanks again it’s good now i can update my website easily and i will don’t have any problem about PowerArchiver and it’s look great
Regard’s

Thanks for the info.

Here I have a 263 character filename to which I added characters to rename and it worked. Also removed characters to a shorter filename, also worked.

Maybe we can give it a try with your sample file and settings as described in my previous post. Hopefully we’ll be able to reproduce it then.

thanks!
attachment_p_35083_0_long-filename-rename.png

Thanks!

I see in your video, and have confirmed in my test here, that the file name shows for all files but the progress bar for the current file isn’t.
Logging it in, thank you!!

@skypx:

Not sure if my explanation will suffice, but here goes…

tar puts multiple files into a single (tar) file.

gzip compresses one file (only).

So if the files don’t have the correct extension the program used to open it will try and fail simply because it tries to open it based on the extension. ;)

thats a good explanation… tar has no compression but can store multiple files.
So several compression formats can be used to compress tar files (gz, bz2, xz).

When server is not configured properly, it gives you wrong extension. File on server could very much be .tar but server gives it to browser as tar.gz and the issue is there.

@ckit:

When Adobe Acrobat\Reader stops using the internet\cloud? to view a local PDF I may return to using it.

i didnt notice that? In any case, it also has issues as well. I had to reinstall it few times to make it working (it is own instance).

It sucks to have to do so much work when you simply have to print something 2 times per month.

@Brian:

Yes.

thanks - I will check with the team next week.

Thanks for the info.

just wanted to let you know about this that’s all

Hello Yael,

After checking out rep files, they are reports from stock software and they are not compressed files, hence they can not be opened by PA or any other archiver.

@spwolf:

can you send us what font/size you are using so we can see what works with it. Thanks!

The font I am using is Courier New, Bold, Size 14.

Also perhaps related settings under the File Listing options section: Grid lines option selected, Viewing Style Classic

Hello,

there are no more trial licenses right now. They were available for first 3 months.

Thank you!

HI.

I will see that my friend make a complete new imagefile.
Hope that this will work.

MfG
MDus

@joakim_46:

When updating from version 16.00.67 to version 16.02.04 under Windows 10 x64, I got a dialog box called 7-Zip with error “Can’t load config info”. And the PatchBeam update did abort. Tried second time, and no error this time.
Just want to inform you.

Is this when it asked you if you want to restore the settings? If so, maybe the download of the settings got interrupted but worked 2nd time? Thanks!

@deadlyshadow:

Hello

After clean installing windows and exactly after installing PowerArchiver, Windows Explorer opens with a delay, it seems unchecking “Use Explorer Extensions” will not unload Explorer Extension.

Regards

Hi deadlyshadow.

Check out shellexview:
http://www.nirsoft.net/utils/shexview_setup.exe
http://www.nirsoft.net/utils/shexview.html

It lets you disable specific shell extensions.

You can try seeing which one exactly is creating this issue for you and maybe if it is due to presence of some other shell extensions as well. You can easily sort by name and then go to PowerArchiver ones.

After disabling any of the options, you need to restart explorer.exe from taskmanager (right click> Restart).

thank you!

Hi spwolf,

Here are the two dialogues that do exactly the same thing AFAICS. One you get by opening PA and then clicking File > New and the other by right-clicking on some files and getting to compress with options. I have been brief, but I hope you will follow what I mean. I much prefer the “file - new” dialogue.

Either way, it does not seem intuitive to have two different dialogues that do the same thing. IMHO there should only be one. Maybe the best of both could be used to create a third design that could be the only one needed?

Cheers

DrT
attachment_p_34916_0_file-new.png
attachment_p_34916_1_right-click.png

@spwolf:

why? Those who ask, often get… thats life :-)

We do give out licenses or extend them to people who report interesting bugs.

I’ve asked, and am still waiting for any response regarding the license….

Yes it has, thanks guys!

It works. Thanks :)

fixed:
http://www.powerarchiver.com/forums/showthread.php?t=6534

Hi,

I just checked things again this end and all worked well. I do not know what happened…cosmic rays, yet another ‘senior moment’ etc.

Apologies for the inconvenience, but thanks for being there.

Regards

DrT

@spwolf:

thanks, fixed, it should work now!

It is indeed.

Cheers

DrT

@Brian:

I’ve now Installed powarc160072.exe

It identifies itself as 16.02.01 both in it’s about dialogue and in Control Panel / Uninstall or change a program!!

we are testing some installer features, no worries

Strange.

Got it…thanks.

@PA_Fan:

Thanks.

I had a subsequent problem where the skin somehow became corrupt, with all buttons hidden, and thus rendering PA inaccessible.

For various reasons, I updated to16.00.69 by downloading the entire file, so was able to use this to repair the installation.

When that was complete, PA was restored to normal look (albeit with settings lost) and the delete/refresh problem has been cleared/fixed.

when something like that happens next time, try to save the registry so we can reproduce it here. Same goes for the repair, manually deleting HKCU\Software\PowerArchiverint would have likely reset it all back without need to repair.

thanks!

@drteeth:

It is a shame that it is a full screen mode, it would be more useful if it had the same functionality without resizing (drastically in my case) the main PA window. As it is, the option is useless to me as working full screen takes away the need to hide the ribbon.

Regards

DrT

but you can have same functionality… just doubleclick on Home caption. It will minimize the “toolbar”.

Should be running fine by now, they said they will include it into next update?

This has been fixed in latest update by Norton tonight. This is not our error but issue of false positive from AV vendor. So if you notice it in the future, you can also report it to them for quick fix. Thanks.

@spwolf:

disable color coded file list at the bottom left in status bar, first button.

Thanks, that did it. I was playing around a few days ago and could have clicked on that button. It is not very clear on the interface whether this option is disabled or not. I think the bubble help should change to indicate the status of the option and also the colour difference between the two states should be more marked. Throughout the interface, the only indication that an option is active/a button has been clicked is a very light grey, which does not stand out at all. In some places it is lighter than others.

Regards

DrT

@drteeth:

It would be nice to have a changelog for each version. If there is one, I cannot find it.

Thanks

DrT

coming monday… hopefully in the future for fast ring updates we could make forum posts.

@cetko:

Hello!
Your password is not stored in cleartext. Password are stored encrypted. We use strong and secure algorithm for password encryption.
Accounts are safe.
Cetko

But clearly they’re not stored as a salted hash.

Where does the decryption key come from to allow you to email the password?

@SMH17:

Now zipx seems working in 16.00.64 but other problems that I have reported (eg on 7-ZIP and ZPAQ) are still here in this version

we will update those other threads when we have solutions for those other problems of course.

@spwolf:

Fixed:
http://dl.powerarchiver.com/2016/powarc160064.exe

thank you!

Excellent. Thanks to you also.

@Nickji:

Updating gets stuck at “Preparing PowerArchiver 2016 Setup Wizard” after the Patchbeam utility has run.
64 bit Windows 7, PowerArchiver v.16.00.56, McAfee Livesafe allowing Patchbeam internet access to designated ports.

Hello,

thats just our installer running. Are you sure it is not McAfee scanning the installer? It could take long time (scanning part).

You can download latest release manually from our download page and check it out that way, but it is the same installer.

Ah. Thank you.

Should be fixed here (1):
http://dl.powerarchiver.com/2016/powarc160064.exe

thanks!

Please check with this latest release:
http://dl.powerarchiver.com/2016/powarc160064.exe

We did not have much time to test latest release yet, thank you!

No problem. The new Power Archiver version seems very interesting, and I’m doing some test during my free time.

Usually to avoid this when I have to use localized strings in a program I do a check with the longest GUI strings localized. So if fit well the longest, will fit also the others.

thanks for letting us know, we have logged this in

extend the size of the window… it is adjustable. I guess we should set larger minimum size.

Final is out:
http://dl.powerarchiver.com/2016/powarc160061.exe

Updated translations and smaller graphical changes to better fit various translations, etc, etc.

Thanks everyone!

@bws110011:

I had the same issue with an automatic update going from 16.00.46 to 16.00.56. I found the old installation file and reverted to .46. It was still registered with no action on my part. I sent an email to support with more details, but if you need information from another ‘bad’ system I can supply it if needed.

(Question: Does the registration code change each time you request it? I had looked up the email from December with the registration code and tried that, then requested it again to confirm that I had it correct and it provided a different code.)

Hello,

this has been solved update few days later, here is the latest release:
http://dl.powerarchiver.com/2016/powarc160060.exe

Yes, the code changes each time due to encryption used. Thanks!

@spwolf:

Hello,

thank you for your report.

We have fixed this issue and improved translation module across the application. Now everything should be translated, everywhere.

Here it is:
http://dl.powerarchiver.com/2016/powarc160058.exe

thank you!

Hello,
Thank you. Now everything works well. :)

@spwolf:

thanks, this was due to automatic language selection and we fixed it in one of the internal releases but it came back… since we already knew what it was and we noticed it day before, we were able to quickly fix.

Awesome work !

:)

works with .53

@Integer:

Works like a charm :) Good job.

thanks for letting us know… if you notice anything else, or need some other improvement for this features, you know where to write now :-)

Fixed in build 16.00.51

This should have be fixed in .52:
http://dl.powerarchiver.com/2016/powarc160052.exe

thanks for checking it out!

@drteeth:

I could not get the toolbar back by hovering over anything. Double-clicking got me out of special mode. I can now open an archive with the toolbar always showing.

Thanks

DrT

yeah, my bad… its single click for toolbar to show temp, and doubleclick to exit the mode - or actually enter it. I think in Win10, this is how Explorer works by default. In PA it is disabled by default and you can enable it as you have found out :-)

Will do what you ask next at the site. Yes, to your question on a successful upload to Google Drive with the same folder selection.

This is fixed with the .50 release.

@moles42:

Update !

I had to remove latest drive emulator and use windows 10 default options to mount ISO…
I then reinstalled Virtual Drivers and the option returned to shell menu but it doesn’t
actually show the option in the shell configurations menu…did you decide to remove it perhaps ?

After I closed PA the ‘mount / unmount’ options have once again disappeared from the shell menu.

PA is overwriting settings that VD is setting. So install VD and then run PA.

We will get them back to config.

@Brian:

Thanks. That displays them perfectly.

if you find anything else with viewer, let us know… also any wishes for the viewer, let us know.

http://dl.powerarchiver.com/2016/powarc160050.exe

update for language fix.

Hello,

when I attempt to extract a subfolder (from a self-extracting executable), strange things happen:

The archive looks like this, in the tree view on the left:

pywin32-219.win-amd64-py3.5.exe [1]
** PLATLIB
*** adodbapi
*** isapi
*** [etc.]
** SCRIPTS

I want to extract only the contents of the PLATLIB folder, so I select it in the tree view and click “Extract Files”. In the “Extract” dialog, “All files” is selected, “Selected files” is grayed out. None of the five “Options” are selected.

After extracting, I get a folder that looks like this:

adodbapi isapi [etc.] SCRIPTS

PA has extracted the contents of the selected folder as top-level folders in the target, then dropped the other folder from the archive into there as well.

I suppose the correct way to do this is to select the contents of the PLATLIB folder in the right pane first, but if PA works any differently depending on what is selected in the tree view, I think it should not intermix files/folders this way.

This happens with both 2015 and 2016 RC2.

[1] http://netcologne.dl.sourceforge.net/project/pywin32/pywin32/Build%20219/pywin32-219.win-amd64-py3.5.exe

@spwolf:

As to the 4. units, You mean change between bytes, kB, MB?

Yes, that is what I would like to do.

Happy new year.

DrT

The new version works nicely. Thanks!

Can you please try this issue with latest PA 2016:
http://dl.powerarchiver.com/2016/powarc160044.exe

thank you!

@Richard:

Hi,

I am a long time user of PA. I primarily use it to decompress audio files to my Windows Home Server based server. This worked fine until I upgraded to Windows 10 on my laptop, but it is now very slow and unreliable. It takes a long time to bring up the folder destination lists and whilst decompressing often hangs up and occasionally crashes all together.
I have tried remapping the destination drives but this doesn’t help.

Anything else I can try?

Best wishes,

Richard

It seems your network is slower/unreliable after Windows 10 upgrade. This could happen for instance due to bad drivers. Check if you have latest drivers for your network adapter.

Also check network speed - for instance simply copy file in Windows Explorer between two computers, how fast does it go? Does it often stop?

@drteeth:

Done. Sent to ‘support@’.

DrT

Cool, I will check it out now, thanks for sending it.

Just to confirm - upgrade process in Windows Installer will not delete your previous settings, it is not supposed to.

Sometimes when we change important parts of PA, there could be old setting that clashes with new PA. We test this usually so for instance default values will always work fine but it is up to us to make sure it works properly, there is not automated way.

In this case with PA 2016, toolbar component is completely new, so it has everything different compared to old one and we manually adjusted settings to match.

@ckit:

Just a heads up, if you print your email containing your PA 2016 registration details to a PDF, open it in PDF XChange Editor and then copy and paste into PA 2016 it will Fail everytime!!!

It has to be done from your browser or some other PDF reader

Update:
I’m using a clipboard manager called Ditto in the background which may also be interfering.

it is just a text email - there is nothing fancy about it, pdf editor is likely doing something wrong when it creates PDF.

what about office 2010 silver skin for now?

@Knightbeat40:

Here is the screenshot https://www.dropbox.com/s/d6fmuqqz58ohdri/Image%201.jpg?dl=0

Ah, so you cant run PAOP and ZTE together… they do the same thing. ZTE is for when you want independent compression for Outlook and shell, without PowerArchiver installed and PAOP is when you already have PA installed.

@hot_denim:

Yes, SFX Wizard creates a .EXE file that is an ‘extractor’ and also the ‘data’.

Any particular reason why it is not made available for use to the public?. (It is not much different for the SFX Wizard’s .EXE, just not combined)

It is custom code created for Adobe for their specific application needs…

maybe some PA setting for FTP changes, did you send Mili via email your settings? That way he can check with your updated setting to see if it works on his computer… i assume he is testing with ones that work for you :-)

Confirmed, thanks for letting us know sheresi!!

Logging it in

Sorted. Updating now. Thanks.

DrT

it will work with any size…

we will have to check it out, it is unlikely that it is reporting fake crc error. Maybe some incompatibility with the tool it created the archive.

thanks for reporting it!

Mni tnx.

DrT

nice1!! :)

Worked just fine in PA I assume?

@Alycat:

Ok, I will enable logging.

But I know which files, I sat and watched, when I get that Windows box (second above, except it says powerarchiver.exe) everything is greyed, and in the list of files backed up errors start to appear. When I click that box to allow it, all starts up again ok, except for those file errors when it was grey.

ok, so you can use vss settings for these files to make sure they are backed up.

@leishirsute:

It’s too bad that you cannot include PK2.0g but show a warning of its weak and insecure encryption. Now Powerarchiver has no compatibility with Windows 7 Explorer zip folder usage for encrypted zip files. When sending an encrypted zipped file to novice Windows users it was convenient to tell them the password and to have them just open the file with Windows Explorer folder access.

I will stay on the PA (11/2014) version until I figure out what compression software is compatible Windows Explorer encrypted zip folder access.

Thanks for the notice.

pk 2.04g encryption is now considered a security flaw. It can easily be broken very quickly by anyone how can search on google.

So if you are sending it to someone, you can send them a link to PA 2015 download, even if they do not purchase it, it will let them extract the file… that way at least encryption is secure.

I dont think MS intends on updating their engine, it is 10 year old these days and company that sold it to them went out of business long time ago.

Hello, this should be fixed in the latest update. Tested here and confirmed :)
You may update via Patchbeam or use this direct download link;
http://dl.powerarchiver.com/2015/powarc150304.exe

Please let us know and thanks for your help!

@spwolf:

You can help us test it here:
http://www.powerarchiver.com/test/release15/powarc150301.exe

We still did not have time to test it properly, so it would be helpful… thanks!

Yes, seems fine to me. :)

Thank you.

Thanks for the help.
I made a profile so I can use it both ways.
by default is set to .zip.

if you save your complete settings via the Options>Config dropdown, then your cloud account definitions will be saved as well and you can just run the .reg to apply them.
Or, save them to Cloud and restore them upon registering PowerArchiver using your online code.
hope that helps :)

I didnt see the video, Mili is out now… so he will let me know tomorrow and I will check it out… it is nothing to get worked up about though! Thanks Hugh.

Here is the updated PA 2015 15.02.1 which fixes the bug with zipcrypto instead of AES when using drag and drop:
http://www.powerarchiver.com/test/release15/powarc150201.exe

thank you for the report!

@steje:

I will certainly use either the email or forums here in the future. I’m not complaining about a lack of support response or anything :-).

Please realize - I posted simply to ‘question’ if the support ‘Form’ was intended to be used anymore because I didn’t get a response and because the latest version in the list was quite old. The last part in particular happens sometimes when companies switch their support model at a point in time and neglect to update older links, etc…

And I only continued to try in case you wanted to figure out why it wasn’t working. But I’m content to just move on with life :-).

Hey Steje, we know you mean well :-).

Thats why I asked you to send email, please send it - it uses same support system. I want to check if that works for you.

We keep getting support emails via web form all the time, so it is weird that it does not work for you.

Thank you!