From within PA on the extract popup, buttons are hidden, I must resize the window to get access to the OK/Cancel buttons. Tried on the default notebook screen (Macbook M1 Max 14") as well as on my external monitor (4k).Screenshot_2022-05-12_10-02-10.jpg
Ho già contattato il supporto con il modulo presente qui https://www.powerarchiver.com/it/contact/ da settimane ma non ho ricevuto riscontro e ora che ho aggiornato alla versione 21.00.15 ho notato che il problema persiste.
Quando clicco PDF Encrypt & Sign nel tab Crittografia appare la schemata riportata sotto come se mancassero le funzionalità.
I’ve already contacted support with the form here https://www.powerarchiver.com/it/contact/ weeks ago but I haven’t received any feedback and now that I’ve updated to version 21.00.15 I’ve noticed that the problem persists.
When I click on PDF Encrypt & Sign in the Encryption tab the schematic below appears as if the functionality is missing.
I have tried to burn a DVD with PowerArchiver 2022 Final, but it didn’t work because PA didn’t found the external DVD-Burner.
I have tried several burners from Sony, LG, Dell.
I have connected the burners with several USB-Ports but unfortunately without any success.
With other burning software, e. g. Nero, all burner worked perfect on each USB-Port.
The same problem occured with PA2018 and it was solved with an update, but I don’t remember the detailed software version.
Could you check the possibility of an bug, please?
Thank you for your support in advance!
Quando creo un archivio zip con un altro programma ad esempio Winrar se apro il file con Winrar vi sono visualizzati anche le date originali di Accesso e Creazione.
Se ottimizzo quel file zip con la funzione Ottimizza archivio di PowerArchivier (o creo un nuovo archivio) il file risultate non ha più le date originali di Accesso e Creazione.
C’è una opzione per preservare questi dati? (Non l’ho trovata nelle impostazioni del programma e ho già abilitato le opzioni “salva info complete cartella” presente in “Profili di compressione”)
When I create a ZIP archive with another program such as Winrar, if I open the file with Winrar, the original Access and Creation dates are also displayed.
If I optimize that zipper file with the Optimize Archive function of PowerArchivier (or create a new archive) the resulting file no longer has the original Access and Creation dates.
Is there an option to preserve this data? (I haven’t found it in the program settings and I have already enabled the “save complete folder info” options in “Compression Profiles”)
Upgraded from 2021 to 2022. Selecting ‘backup’ no scripts are showed. Only after editing and saving an existing script (explorer) it shows up in the PA backup folder.
So is the ‘backup’ icon to open the Backup screen only for creating ‘new’ ones. This means that you have to open ALL your old pbs files and to save them again… not user friendly.
No way to improve this ? Thank you.
PowerArchiver 2022 - Final Version - 21.00.15
Information about PowerArchiver 2022 - 21.00.15:
Thanks everyone for your assistance!
I have a 31" 4K screen with 3840x2160 pixel, which PA is able to handle - except of a scaling other than 100%.Access violation at address 0000000..DF47A4 in module 'powerarc.exe'. Schreiben of address 0000...00330.
When changing scaling for this screen to 125%, starting PA brings the following exception:
After closing this message, PA seems to work fine.
PA version 21.00.15 (03/2022) 64bit (tested with Win 10 and after upgrade Win 11)
Is there any chance to avoid this access violation or this message?
Thanks and regards,
the new Windows 11 context menu is not localized in PA 21.00.13.
While the classic context menu is localized, when it’s opened on a file on my desktop, it’s English, when it’s opened from a file on my C drive.
@Mili Are there updated localization files available?
I thought, I’ll give it a try and upgrade my PA 2018 Toolbox on my production machine to PA 2021 (20.10.03)Sending registration codes in your order recovery doesn’t seem to work at the moment (I also checked my junk folder), online activation works Using registry to disable modules (for example HKLM\SOFTWARE\PowerArchiverInt\General\DisableBurning) doesn’t work as expected with modern ui. The module is visible, but I’ll get the trial nag, if I try to open it. It’s almost fine in classic and ribbon mode.
“DisableClouds” and “DisableExplorer” seem not to be respected at all, while the classic UI seems to respect the setting to disable any other unused module:In settings I won’t be able to access the SmartAI settings and the settings for the internal editor if the FTP module is disabled
PA Queue does not compress file optimally with same parameters if used in Queue mode.
Being able to save advanced option, and set a default profile and archive type for compression so I can save clicks.
The above two are majorly affecting my efficiency with archiving stuff with PA 20.10.03.
Can someone confirm if they are resolved with the 2022 RC1?
I’m running W10 Pro on an HP i-7 machine with now 32gb of RAM. The system drive is an SSD.
In the course of sorting out some inconsistencies in a couple of my .pbs jobs, I’ve been paying close attention to the system CPU resource and power consumption of PA Starter, as shown by the various resource management tools. I’ve also been trying to identify why my system seems rather sluggish despite some extensive tuning for speed etc.
When I have enabled Starter as a start-up programme, to use the PA Queue facility, I see that Starter consistently uses between 10-13% of CPU, with High Power consumption indicated. It runs, consuming this resource, irrespective of what may be happening with PA and any pbs script jobs.
I can understand a need to use a good chunk of CPU when Starter is actually handling PA jobs, but it shouldn’t sit and consume this amount when it really isn’t doing anything but wait for a job to start and for which it is needed.
Perhaps I’ve missed a way of lessening Starter’s impact, but in the meantime I’ve adjusted my set-up to running PA without it.
Compression Profiles to Default …
Is there any way to reset the compression profiles back to install default??
Konglomat last edited by
Is there any way to reset the compression profiles back to install default??
I would have a solution to this :) I have created 2 registry files with which settings can be reset to “default”, I do not know if I am allowed to share files here? I also assume no liability for damages of any kind :) Even if the script should be “Safe”! If I am given permission, I can upload the file to my google Drive and share here. Is this allowed in this forum? I have also written a “read me” txt file with instructions, to use :)
With the script you can
- set only the “compression profiles” to default
- set all settings to default
It’s pretty simple, but effective and it should be followed the instructions in the “Readme”!
Otherwise there is the possibility that it does not work!
Therefore I ask if I may share these files here? they are 100% self-written! :)
I don’t have an issue - lol
What you can do is click on Options>Set Defaults.
That will revert PowerArchiver to installation settings and set the Compression Profiles to default. However, it delete all of your manually created compression profiles and reset all other PowerArchiver settings to installation default.
I guess posting the two reg files would work as they could help someone in need. They would have to contain only the [HKEY_CURRENT_USER\Software\PowerArchiverInt\Profiles] key information and none other, as it could conflict with other settings, including registration.
You can send them to me in a private message, we will check them out just to be safe and then can then post them. Thanks for your help!
Can you help me with more info on customizing that registry key’s values.
I would like to change the default “PA Default”'s values, so I do not have to tick extra options that I have to do everytime, and I can use the shell extension’s shortcut to create archive, saving my time.
Absolutely, which ones are you looking to edit?
I will ask the devs today where they are located.
BigMike last edited by BigMike
But I thought to modify the values, you can simply go to “Settings -> Compression Profiles”.
To modify the default options for PA modify “ShellExt: PA Default”.
No need to mess with the Registry?
Isn’t it the case?
I have checked and the additional options for the PA profile are located in HKEY_CURRENT_USER\Software\PowerArchiverInt\Profiles
As you’ll see there are tons of values there without an easy way to detect which is which.
We also discussed additional options being saved in a custom compression profile, so that you will be able to save the additional options along with the default ones. That may help a bit.
Also, let me know which options you would like changed and I will also check if I can detect which values those are by comparing the changed values, in Beyond Compare or similar software.
I wish to completely customize the default PA profile.
so whenever I start archive from shell, i do not have to go to advanced options and customize the plzma(size and entropy model), zstandard(levels & size), ppmd_sh(sizes) options.
not having to select zlib level, dictonary size, method optimize strong, compression level extreme.
there are various options that I would like to modify for the “PA Default” profile so I do not have to create any new profile.