Navigation

    • Register
    • Login
    • Search
    • Categories
    • Recent
    • Tags
    • Popular
    • Search
    • PA 21.00.18 testing via context menu causes extraction of files

      D

      When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.

      The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.

      The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.

      Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.

      The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.

      The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.

      Tech Support
    • Start PowerArchiver 2023 Starter when my computer starts

      Brian Gregory

      In PowerArchiver 2023 22.00.06 configuration, the option labelled “Start PowerArchiver 2023 Starter when my computer starts” seems to be redundant.

      I am only allowed to change this option when PA Starter is disabled, and then it seems to be ignored.

      When I enable PA Starter this option is forced to the enabled state.

      I think it’d be good to remove “Start PowerArchiver 2023 Starter when my computer starts” completely. I’ve always found it confusing having both options.

      Added later: However i don’t particularly want to use queue but I do like having the PAStarter icon in my tray area.

      Tech Support
    • Testing .pa archives

      PA_Fan

      W10 Pro 22H2 - 64 -bit

      PA 22.00.06 (PA 2023)

      It has been the case with previous versions of PowerArchiver, but I had hoped that the latest might behave differently. Not so, I’m afraid.

      I have, for various obscure reasons, created a few .pa archives, mainly in the hope that they will save me some more space. From time to time, I use the “Test” option to check that important archives are OK and uncorrupted.

      With every .pa archive I’ve tested, the process runs through OK but then reports that there are errors. This is always the number of files in the archive e.g. if 11 files, then 11 errors reported.

      In the .pa, I can:-

      preview the files (usually PDF) extract some or all files and look at or use them convert the .pa to a .zip or .zipx archive, which then works fine and tests without errors

      Is it the case that the Test routine isn’t designed for .pa archives, or is there another reason? Although the .pa seems to function properly, despite the test reporting errors, I would like to be sure that every .pa is OK and not “broken”.

      Some of the .pas are quite old and produced with earlier PA versions (they are truly “archives”). If I extract all the files in the old .pa, create a new, fresh .pa and add back the files to that, then test the new, no errors (at least in the .pa I’ve tried this on) are reported. This would suggest a mismatch between old .pas and newer versions of PA itself.

      Tech Support
    • PA 21.00.18 Action / Test behaves oddly for me on .PA files

      Brian Gregory

      PA 21.00.18 running on Windows 7 64 bit.
      I made a big .PA file and thought I’d check it was made correctly with Menu / Actions / Test.
      Discovered:
      a) PA always issues a UAC prompt to do this!
      b) PA always says there are many errors in PA files.

      Tech Support
    • Small UI / Theme bug in 2023

      Z

      Clipboard02.jpg

      See the, supposedly, blank space where the green box is? It’s like that in Modern Light theme too. I can toggle it, but it’s missing text or shouldn’t be there I guess?

      Thanks :)

      Tech Support
    • PowerArchiver and PACL for macOS

      spwolf

      Dear @Alpha-Testers and all of our users,

      time has come for testing of PowerArchiver and PACL for macOS.
      Please let us know here if you have Mac and can test latest builds.

      Features implemented:
      PowerArchiver 2020 - tabbing, opening, extracting, adding, testing, favorite folders, support for multiple languages, opening via Finder, explorer mode, installer.
      PACL 10 - support for most formats and features in Windows version.

      Upcoming: Tools such as archive converter, batch zip, multi-extract.

      To start testing, please sign up here in this thread, and we will send you latest build.

      thank you!

      Ashampoo_Snap_Wednesday, November 20, 2019_12h54m56s_008_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m05s_009_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m14s_010_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m30s_011_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m39s_012_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m49s_013_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h56m00s_014_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h54m43s_007_.png

      76e97ab9-8d75-4175-9ce8-446500031f38-image.png

      Tech Support
    • Functions in Windows 11 context menu no longer work after last Windows Update

      T

      For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.

      I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.

      Tech Support

    Fast Ring: PowerArchiver 2017 17.01.04

    Tech Support
    2
    7
    9592
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • spwolf
      spwolf conexware last edited by spwolf

      Release Notes - PowerArchiver - Version 17.01.04

      ** Improvement
      * [PA-1096] - sorting by extension enable
      * [PA-1100] - Remove password policy requirements when creating a PGP archive
      * [PA-1132] - add .mzz to the same steps as MSI
      * [PA-1133] - add rll files to exe steps
      * [PA-1138] - Only one password input field when creating a PGP archive and decrypting a PGP archive
      * [PA-1160] - do not show update prompt if uses drag and drops files to archive
      * [PA-1173] - add pa format under All Archives drop down in Add Window
      * [PA-1174] - add new 1t solid switch for max, ultra and extreme modes
      * [PA-1176] - small changes for English translation
      * [PA-1177] - improve exe/dll compression with plzma:a0 setting for c_adr output
      * [PA-1180] - add 1p4 extension to exe/dll step

      ** Task
      * [PA-1120] - remove POWERARC-PACKMP3.EXE from installer (not used)
      * [PA-1127] - update Simplified Chinese translation (zh-CN)
      * [PA-1137] - change default update ring to slow ring (first installs, reset to default).
      * [PA-1169] - implement latest advanced codec pack engine
      * [PA-1175] - remove extra japanese shell translation

      ** Bug
      * [PA-742] - PAES Standalone: Open PGP Keys tool does not refresh when clicking back arrow
      * [PA-1098] - deleting PGP keys in PGP manager
      * [PA-1116] - Backup: Cloud account not showing in final screen
      * [PA-1123] - changing highlight archives color, config window loses focus, shows always white in config even if selected color works properly.
      * [PA-1128] - enterprise: disabled features still show under new> button
      * [PA-1136] - Small spelling fix in incorrect registration codes dialog
      * [PA-1156] - change configure clouds shortcut to o
      * [PA-1163] - zip crc error on 32bit OS
      * [PA-1168] - mp3 files not showing correct memory usage calculation
      * [PA-1170] - try to start backup, av shows.
      * [PA-1179] - Favorite Folders, Converter dialog is empty
      * [PA-1181] - AV error when extracting PA format via shell in Windows XP

      Added 04/10/2017
      * [PA-1189] - burner translation not showing properly
      * [PA-1190] - onedrive login issues as of 2/10/17

      PA 2017 17.01.04 download:
      http://dl.powerarchiver.com/2017/powarc170104.exe

      Please check it out and let us know if everything you use works correctly. Build is now live on patchbeam.

      Thanks! @Alpha-Testers

      1 Reply Last reply Reply Quote 2
      • Brian Gregory
        Brian Gregory Alpha Testers last edited by Brian Gregory

        Near the end of manually installing this over 17.00.92, it said it would restart the programs it has stopped to allow the upgrade. However, it did not seem to restart PASTARTER. The same happened on both my PCs. They run 64 bit Windows 7. I have PA’s Queue disabled.

        spwolf 1 Reply Last reply Reply Quote 1
        • spwolf
          spwolf conexware @Brian Gregory last edited by

          @brian-gregory if it is PA Queue is disabled, then it should not start anyway. Thanks!

          Brian Gregory 1 Reply Last reply Reply Quote 0
          • spwolf
            spwolf conexware last edited by

            @Alpha-Testers updated OP with list of issues fixed.

            1 Reply Last reply Reply Quote 0
            • Brian Gregory
              Brian Gregory Alpha Testers @spwolf last edited by

              @spwolf But the option to have PASTARTER present even when queue is disabled exists in PA and I use it that way.

              spwolf 1 Reply Last reply Reply Quote 0
              • spwolf
                spwolf conexware @Brian Gregory last edited by

                @brian-gregory said in Fast Ring: PowerArchiver 2017 17.01.04 (unreleased):

                @spwolf But the option to have PASTARTER present even when queue is disabled exists in PA and I use it that way.

                seems like Inno setup issue… we will check it out for 2018. Keep in mind that usually we use patchbeam these days so it wont do that.

                1 Reply Last reply Reply Quote 0
                • spwolf
                  spwolf conexware last edited by

                  @Alpha-Testers portable and business versions now live on download site. Fast ring on Patchbeam for today, moving to Slow ring tomorrow.

                  1 Reply Last reply Reply Quote 2
                  • First post
                    Last post