-
PA2023 Win10, (same problem with older releases but never reported)
PA Soft is installed on partition D. (exclusive for installed progs)
Then I created on my partition G: the folders as configured in PA Settings ‘Folders’.0fcf1b09-1b91-4b74-b250-f8cf908a3348-Ashampoo_Snap_maandag 20 maart 2023_11h54m34s.png
Screenshot 2023-03-20 121152.png
The problem : Any activity on PA is saved in these folders…
PA ignores them and still use the default settings. Whats wrong ? Regards, Pirrbe -
I am still using Powerarchiver 2022 and it does not show pdf markups in the preview. Is there a setting to get version 2022 to show pdf markups in the preview? If not, does this work in version 2023?
-
The question that I have about PA archives is what happens if say ConeXware, as a company, dies in the future? What happens to any PA files that are created today? Can these files be decompressed with a copy of a PowerArchiver that can no longer phone home to the mothership thus can’t be registered or activated?
I mean, I can understand that new PA files wouldn’t be able to be created if the program isn’t registered but what about an un-registered copy because well, the question that I posed above?
It’s questions like this that make me not want to store anything really valuable in PA files out of fear that I, at some point in the future, might lose access to said data inside those files. OK, 7ZIP might not be able to compress as heavily as PA but at least it’s open source and any 7ZIP files will still be able to be read and decompressed ten, twenty, or fifty years from now.
-
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
-
Is this a known problem? Is there a fix coming? This is a primary reason I buy PA.
I’ve tried both methods I know to extract multiple zips at the same time. 1) Multi Extract feature in the GUI. 2) In Windows File Explorer, select multiple zips, right click, use PA context menu to Extract or Extract To…
Is there a setting I missed? Or maybe it really is processing in parallel, but I can’t detect it? Nothing tells me in the Processes in Task Manager that multiple PA extracts are running. And my CPU, memory and disk resources do not look like a lot of extracts are running.
I’m using PA 2022 Standard version 21.00.18 on Windows 11 Pro version 10.0.22621 Build 22621.
-
In the latest version of PA, on W11 (latest build/SP) when you try to use the first level context menu - NOTHING HAPPENS (particularly when you do this from Downloads or Documents folders) - however I noticed that it DOES WORK when you use the context menu from the Desktop. Going to the second level context menu does work however.
-
Is the version Preview 2023 also considered to be tested by the testteam ? In the past we got messages in the forum for testing out version x.x, to be downloaded by fastring, or I missed the one for 2023. (I discovered 2023 on the official web…)
CU, Pirrbe.
-
PA 2023 22.00.08
Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
Virtual driver PA 2023-01-28 152607.png
It seems a standard problem with new releases :-)
Can I have a link or can it be fixed. Thank you. CU later -
Hi there, been a user since 13 years now and in past whenever I had a problem or question I could email, however since 3 weeks it seems like everybody is dead?
Anyway, as kind of a last resort, I post this email a 4th time but in this forum instead now, in the hope for help:
"This is the 3rd time I am emailing you guys as I am missing a working code for the preview of Power Archiver 2023Can you please help me? I am a 13 years lasting customer of yours, and I am shocked thatr for whatever reason my support tickets are ignored now, why?
thanks in advance!
All the best!
Joerg" -
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
PA 21.00.18 running on Windows 7 64 bit.
I made a big .PA file and thought I’d check it was made correctly with Menu / Actions / Test.
Discovered:
a) PA always issues a UAC prompt to do this!
b) PA always says there are many errors in PA files. -
When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.
The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.
The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.
Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.
The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.
The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.
Blurry Text
-
hi PA
since i have a new Monitor & windows 10 the window of powerarchiver is very blurry
i found the solution on Microsoft TechNet, but they say it’s up to the programmer to fix the Software
rerad more here
https://technet.microsoft.com/en-us/library/dn528847.aspx
would be nice if you could check this.
txs
marc
-
you need to lower the dpi to 125dpi, at 150dpi, it will not work properly… Only thing we can do is disable dpi scaling at 150dpi completely.
-
hi, i’m using a dpi of 110%,
-
what version of PA are you using?
-
the latest
-
in the properties under comppability i can disable scaling high dpi
then the program Shows finei made 2 pics of the difference but i don’t know how to Show you
-
can you do a screenshot please?
-
send it to support at conexware dot com if you cant attach it here.
-
i see what you are talking about… please do use the disable checkbox in properties to get it back to normal size… not sure what exactly we can do since we cant disable it automatically I think thats one of the Win cert logo rules.
We will try doing something better in the future.
-
does the Microsoft link didn’t help?
https://technet.microsoft.com/en-us/…/dn528847.aspx -
does the Microsoft link didn’t help?
https://technet.microsoft.com/en-us/…/dn528847.aspxnope, this is how it works for delphi applications…. this is auto scaling by Windows.
-
hi
i’m using a System tool called privazer.
today on their Forum they wrote“we need your help to test UI changes for high DPIscreens (no other changes in this version). Simply download it, use it and have a look if there are layout/design issue: It should look much better on high DPI screen.”
so there must be a way or??
-
Marc, let us know what do you need aside from disabled dpi support that makes it blurry… anything else?
-
i just want you to fix it and not to disable it. as another programmer did for his software too after i asked too check it
** is high DPI aware. However, it did not properly tell the Windows it and therefore some Windows UI scaling values (e.g. 125%) did not work properly, but Windows scaled ** as a bitmap resulting blurred font.
It’s now fixed
-
i just want you to fix it and not to disable it. as another programmer did for his software too after i asked too check it
** is high DPI aware. However, it did not properly tell the Windows it and therefore some Windows UI scaling values (e.g. 125%) did not work properly, but Windows scaled ** as a bitmap resulting blurred font.
It’s now fixed
thank you Marc for your comments, we spoke about this over support chat yesterday… we will take a deeper look into doing manual adjustments for larger dpi sizes in PA 2016… hopefully it will be possible. Thanks!
-
hi PA
since i have a new Monitor & windows 10 the window of powerarchiver is very blurry
i found the solution
I can confirm that this will look really nice in PA 2016… we just did work on it, and results are good… one control is still giving us issue but it should be working fine by the time beta comes out.
It will work fine with 125%, 150% and even 200% larger dpi. So 4K screens here we come.
Thanks for reporting this and if you have any other reports or wishes, let us know (new thread though!)
-
hi drazen,
great News. txs. but will it only work fine with 125,150,200%? as i use 110%
-
it will work with any size…
