-
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
-
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
-
In the latest version of PA, on W11 (latest build/SP) when you try to use the first level context menu - NOTHING HAPPENS (particularly when you do this from Downloads or Documents folders) - however I noticed that it DOES WORK when you use the context menu from the Desktop. Going to the second level context menu does work however.
-
PA 2023 22.00.08
Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
Virtual driver PA 2023-01-28 152607.png
It seems a standard problem with new releases :-)
Can I have a link or can it be fixed. Thank you. CU later -
When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.
The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.
The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.
Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.
The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.
The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.
-
In PowerArchiver 2023 22.00.06 configuration, the option labelled “Start PowerArchiver 2023 Starter when my computer starts” seems to be redundant.
I am only allowed to change this option when PA Starter is disabled, and then it seems to be ignored.
When I enable PA Starter this option is forced to the enabled state.
I think it’d be good to remove “Start PowerArchiver 2023 Starter when my computer starts” completely. I’ve always found it confusing having both options.
Added later: However i don’t particularly want to use queue but I do like having the PAStarter icon in my tray area.
-
W10 Pro 22H2 - 64 -bit
PA 22.00.06 (PA 2023)
It has been the case with previous versions of PowerArchiver, but I had hoped that the latest might behave differently. Not so, I’m afraid.
I have, for various obscure reasons, created a few .pa archives, mainly in the hope that they will save me some more space. From time to time, I use the “Test” option to check that important archives are OK and uncorrupted.
With every .pa archive I’ve tested, the process runs through OK but then reports that there are errors. This is always the number of files in the archive e.g. if 11 files, then 11 errors reported.
In the .pa, I can:-
preview the files (usually PDF) extract some or all files and look at or use them convert the .pa to a .zip or .zipx archive, which then works fine and tests without errorsIs it the case that the Test routine isn’t designed for .pa archives, or is there another reason? Although the .pa seems to function properly, despite the test reporting errors, I would like to be sure that every .pa is OK and not “broken”.
Some of the .pas are quite old and produced with earlier PA versions (they are truly “archives”). If I extract all the files in the old .pa, create a new, fresh .pa and add back the files to that, then test the new, no errors (at least in the .pa I’ve tried this on) are reported. This would suggest a mismatch between old .pas and newer versions of PA itself.
-
Clipboard02.jpg
See the, supposedly, blank space where the green box is? It’s like that in Modern Light theme too. I can toggle it, but it’s missing text or shouldn’t be there I guess?
Thanks :)
ImgBurn 2.5.8.0 ISO images and PowerArchiver Toolbox
-
Ok I have a small 1Mb ISO (4 XML logs for MBAM) compressed called “Test.7z” that also doesn’t display contents in PA which was created with ImgBurn 2.5.8.0.
Please see what you can make of it?
attachment_t_6181_0_test.7z -
PowerArchiver doesn’t recognise ImgBurn’s ISO’s as valid archives!
-
Just re-created the same ISO with the same files as “ISO9660\Joliet” instead of “UDF” and PowerArchiver has no problem displaying the files at all!
PowerArchiver has problems with UDF 2.01 ISO’s created by ImgBurn 2.5.8.0 it would seem.
Update, no problems with UDF 1.02 ISO’s.
Update, no problems with UDF 1.50 ISO’s.
Update, problems with UDF 2.00, 2.50 and 2.60 ISO’s.
-
thanks, we will check it out.
-
I’m sorry to do this to you but this is still an issue with PA 2016 RC2 build 50.
This ISO in screenshot opens fine in WinRAR 5.30 x64 but in PA there is nothing at all.
-
gonna install imgburn and give it a try with the latest version. thanks!
-
ISO types:
ISO 9660 Juliet most works (just found one that doesn’t)
UDF 1.x works
UDF 2.x doesn’t workI think it depends on the type of ISO and what app created it, IMGBurn in this case.
-
I have here an similar Problem.
I get from an friend an iso Image with an photo Collage.
The file Extension ist .imgWith Powerarchiver 2015 I have no Problem to open this file.
But with powerarchiver 2016 i have no possibility to open the file or extract the files within the iso imge.I have no Infos about what for an configuration my friend has used to create the Image file.
But until know I had no reason to know the configuration because i had never an problem to open this iso files until now.
MfG
MDuss -
I have here an similar Problem.
I get from an friend an iso Image with an photo Collage.
The file Extension ist .imgWith Powerarchiver 2015 I have no Problem to open this file.
But with powerarchiver 2016 i have no possibility to open the file or extract the files within the iso imge.I have no Infos about what for an configuration my friend has used to create the Image file.
But until know I had no reason to know the configuration because i had never an problem to open this iso files until now.
MfG
MDusswould you or your friend be able to send us an .img/.iso file that does not work as described above?
Just tested creating and ISO and and IMG via IMGBurn, both opened fine in latest PA 16.03.01.
Can you send us some of the files you are using to create the IMG/ISO that does not work in PA?
We’ll try with those.You can send to support at conexware dot com
thanks!
-
Hi Mili.
The files are very big, nearly 2.5GB, so it is not very easy to send them.
I send my friend in Australia an email so that he try it again with the iso file.
Maybe it will work than.MfG
MDuss -
one suggestion that could help is send them the file via dvd post wise.
second suggestion would be to look at the type of iso that has been created. Try a different setting to produce another iso that powerarchiver can read then we can highlight a seting or iso format that powerarvchiver needs updating/ adding.
What iso format is being created? that’s the question.
-
Hi Mili.
The files are very big, nearly 2.5GB, so it is not very easy to send them.
I send my friend in Australia an email so that he try it again with the iso file.
Maybe it will work than.MfG
MDussask him how is he creating them and if he can do a small one in the same way?
thanks!
-
Yes, what spwolf mentioned and I’ll try creating multi-gig ISO today via ImgBurn using different options, lets see
-
HI.
I will see that my friend make a complete new imagefile.
Hope that this will work.MfG
MDus