Dragging files onto archive
-
I’m not sure when this stopped working, but I noticed that dragging a file on top of a zip archive in explorer no longer does anything- PA is supposed to open an “add to archive” dialog. However, it still works for .7z archives. I just tested further and tried this with an .lha archive (worked) and .cab archive (didn’t work). This may be related to my other issue, but in case it is not does anyone have an idea why this could happen? 64-bit Windows 7, using PA 11.71 (was also an issue with a prior 2010 version on same OS). My best guess is it has something to do with Win 7 as support for .cab and .zip are built in, and those are the two archive types that dragging doesn’t work on.
Thinking about it, I’m not sure whether it ever worked since upgrading to Win 7? Hmm.
-
I’m using a later version of PA and it works fine for me buddy…I’d try an update if I were you and re-test.
-
maybe it is due to that associations problem? not sure, works here on 64bit.
-
(both PA 2010 and PA 2011)
-
Could this have a simple registry fix to get the copy feature back? Maybe I should wait and see if the other fix takes care of this as well when it is finished.
-
Hi Qun!
There is most likely an RC5 update to PA 2011, please give it a look with that version and let us know.
Please note the “Associate for All Users” checkbox at the file association option in that version. -
The download page still shows RC4 released last month, but I will give RC5 a try when it is available.
-
it will be up today, half an hour from now :-)
-
Sigh. Nope. This time the issue really is made clear though. When I run it as administrator everything is fine. Answering the Associate dialog “yes,” with the “All Users” box checked works fine and it doesn’t ask again next time I run it as administrator. When I run it normally though, as the logged-in user, I still get the UAC prompts. Whether I accept it or decline it (three times) PA runs and pops up the association dialog. Every time. It seems that PA won’t make the associations. If I choose “Yes,” it then activates UAC again, even if I don’t check “Associate for all users” checkbox. Why is it trying to update either all users or the admin account? If I uncheck that box, it should only associate for the local account which requires no admin approval, correct? Choosing to not show the dialog every time does not stop the UAC prompts at startup.
By the way, logging into the admin account then running PA from there will still pop up UAC, but since there I don’t require a password, it’s just a matter of clicking “yes.”
I hope this issue can be resolved soon. I am looking at that 60% off the toolbox- will this $19.98 deal expire anytime soon? I am hesitant just now since it looks like it uses PA 2011…
Oh, and the issue I wrote about in this topic remains unchanged as well.
-
@Qun:
Sigh. Nope. This time the issue really is made clear though. When I run it as administrator everything is fine. Answering the Associate dialog “yes,” with the “All Users” box checked works fine and it doesn’t ask again next time I run it as administrator. When I run it normally though, as the logged-in user, I still get the UAC prompts. Whether I accept it or decline it (three times) PA runs and pops up the association dialog. Every time. It seems that PA won’t make the associations. If I choose “Yes,” it then activates UAC again, even if I don’t check “Associate for all users” checkbox. Why is it trying to update either all users or the admin account? If I uncheck that box, it should only associate for the local account which requires no admin approval, correct? Choosing to not show the dialog every time does not stop the UAC prompts at startup.
By the way, logging into the admin account then running PA from there will still pop up UAC, but since there I don’t require a password, it’s just a matter of clicking “yes.”
I hope this issue can be resolved soon. I am looking at that 60% off the toolbox- will this $19.98 deal expire anytime soon? I am hesitant just now since it looks like it uses PA 2011…
Oh, and the issue I wrote about in this topic remains unchanged as well.
All users association from 7zip is what made this issue appear, this is why you have it. So in order to fix it, PA needs to take it over.
we will take another look.
thanks!
p.s. toolbox deal wont expire soon.
-
I just wish it would at least respect when I answer “no” and choose “never ask again.” I mean, the formats are already associated with PA whatever the associate dialog says (I open PA by double-clicking an archive). I should say what I mean by respect is to never attempt to promote the opening of PA to administrator level- it does stop asking to associate though. The latest failed attempt in this drama was to reinstall 7-zip (x64 version), associate all formats with it, then unassociate them. The word “failed” says it all. Another failure was trying to have it always load as administrator, then using MS’s application compatibility toolkit to permanently allow it without entering the password. This was to be a workaround I know, not a fix, but it didn’t work.
-
@Qun:
I just wish it would at least respect when I answer “no” and choose “never ask again.” I mean, the formats are already associated with PA whatever the associate dialog says (I open PA by double-clicking an archive). I should say what I mean by respect is to never attempt to promote the opening of PA to administrator level- it does stop asking to associate though. The latest failed attempt in this drama was to reinstall 7-zip (x64 version), associate all formats with it, then unassociate them. The word “failed” says it all. Another failure was trying to have it always load as administrator, then using MS’s application compatibility toolkit to permanently allow it without entering the password. This was to be a workaround I know, not a fix, but it didn’t work.
it is not as simple as it looks… we will have another minor update to see if we made it work properly.
once you associate with all users on 7zip, you cant re-associate as standard user with pretty much any other compression utility (i tried all the big ones lik wr, wz, pk).
-
Any chance CCleaner could be useful in this?
-
i think restore to the date back before 7z associated would be best option but who knows what else you installed since then.
however, we should have next version soon enough.
-
I had had 7-zip installed since about day one of installing Win 7, so restoring is kinda not an option… I will await the next version then. Thanks.
By the way, the version I was using was 9.20, a stable version, but it is possible I had a beta before that- I know you mentioned betas and alphas in an email to me.
-
By the way, is it normal behavior that when uninstalling only the admin settings are removed? Also related, whenever I reinstall PA, running as admin will require the registration info to be entered while running it as local user it is already registered from previous installation (even when I don’t register on the admin account right away).
-
@Qun:
By the way, is it normal behavior that when uninstalling only the admin settings are removed? Also related, whenever I reinstall PA, running as admin will require the registration info to be entered while running it as local user it is already registered from previous installation (even when I don’t register on the admin account right away).
“normal” yes… has been for as long as I have been using ConeXware Products.
Frustrating slightly… But an element to avoid bugs. ie removes all settings and registry links.
One thing i would suggest if you have not done it already would be to use the “Save settings to file…” option on the “Configuration” button once you as a user / admin are happy PowerArchiver works the way you want.
That way after a fresh start you can upload your preffered settings…
One feature I have pushed the development team for is the ability to enter your Serial and Configuration settings during the Installation Process.
-
So you’re saying the settings should be removed, but why are they only removed for the administrator profile, while leaving the local profile intact? Like many people, I set myself up to run as a limited user when I installed Win 7 (also when I had Vista) rather than one with full admin privileges.
-
@Qun:
So you’re saying the settings should be removed, but why are they only removed for the administrator profile, while leaving the local profile intact? Like many people, I set myself up to run as a limited user when I installed Win 7 (also when I had Vista) rather than one with full admin privileges.
hmph, problem here is that install removes what it installed.
and it installed itself under admin user.
when you later on run on any other user, installation does not know that anymore… it is not aware of any other changes to the system.
and when you uninstall, you basically uninstall for all users on the computer, however to have some kind of script that would run through every HKCU for every user and delete all PA keys seems a bit extreme.
-
Understood. Thanks for answering the question, and for the continued work in looking for fixes for the issue I’ve been experiencing, and of course thanks for PA itself.
