Hi. The “Move” Action seems to be Not Working when used in the Tool – Batch Archive.
Using the Options – Configuration – Compression Profiles ---- I created a Profile with the Action of Move. Also set were Zip, and Method Deflate.
When I use the Tool - Batch Archive – It appears to me that the Action Move does not Move the compressed files (basically add to zip, and delete the added file from original location on the same disk). Zip file(s) are created and look ok.
Typically I on the Batch Archive process – I have selected options to use a Profile with the Move Action.File’s Current Folder Group files from same folder into same archive Add subfolders to separate archives
My PowerArchiver version is 21.00.17 .
Can you reproduce ? – Or do you need additional details or information?
I’m running PA 21.00.17 64-bit on a 64-bit i7 desktop with W10 Pro, latest version. This 32gb of installed RAM.
As I use the PA pbs system for a number of scheduled archiving operations throughout the day, PA Starter is set to load and run at system startup.
In the course of trying to identify some causes of slowness and bottlenecks in other processes, I notice that PA Starter (PAS) always runs at between 11% and 15% of CPU (see screenshot), usually at about 12-13%. This is by far the highest demanding process on the system, as shown by Task Manager. In Performance Monitor, PAS Average CPU is 8.32, with every other process at less that 1 i.e. in decimal places only.
Task Manager also shows PAS Power Usage as “Very High”, and is the only process shown thus.
I have looked again at the information about PAS at https://wiki.powerarchiver.com/en:help:details:powerarchiver_starter, which was last modified in 2016. The article states a low memory usage for PAS of 784k, which is fair enough, but it is the large CPU overhead which is of concern.
It is of course possible to change the PAS priority, but this has no effect on CPU overhead.
However, is it possible to change PAS, which is required only at intervals to initiate PA scheduled tasks, from consuming so much system resource for every moment of the day?
i just registered my own copy and i need some help to set it…
if i set the ‘configuration>shell extension>open folder after extracting’ checkbox, after decompress an archive is opened the file manager on that folder but… if somebody is using a different file manager how to open XYplorer or Directory Opus for example and NOT the MS file manager?
consider this as a feature request also if not available within the 2022 version
I am looking for a way to stop the UAC elevation prompt when running Powerarchiver. In an old post about PA 2019, someone asked this and got a response to uncheck “all users” at the prompt but I am not seeing where one can do this. It definitely seems like the way to go though as if I click on “More Details” at the prompt I see that it is trying to run “_pautil.exe /paassociate /allusers /my(long binary string)”. Can you let me know? Thanks.
PS I tried renaming _pautil.exe and this worked, but I don’t know what the consequence of doing this may be so I would like to do this properly, thanks.
Just a question is Ashampoo zip pro 4 built by Powerrachiver as it is very similar and uses the pae encryption.
Here is the email…
On Tue, Jun 7, 2022 at 1:20 PM Rich DiBenedetto email@example.com wrote:
Could you assist me with this?
Can I use my current licenses with MacOS?
If not, can I transfer a license to MacOS?
Cheers and Have a Great Day,
On Wed, Dec 9, 2020 at 6:35 AM ConeXware, Inc. firstname.lastname@example.org wrote:
Dear Richard DiBenedetto,
Thank you for supporting PowerArchiver! Please find your activation and registration codes below.
*** Online Activation ***
PowerArchiver Select for PowerArchiver Toolbox English - LIFETIME
is valid until - not limited.
Activation Code: ***
There would be many of us with Intel Processors.
and they have their own optimized zlib algorithm, which can result in more efficiency if used combined with their hardware processor.
Can we get the same Functionality Under Hardware Acceleration Feature?
Zlib is not the only feature that intel has included with their processor, there’s many, which if combined can result in efficient and better compression ratios.
With PowerArchiver context menu enabled, it is crashing Windows 10 File Explorer when right-clicking on the Default User junction in C:\Users. Had 2021 installed, updated to today’s 2022, still getting same crash. Must have Hidden files and folders set to Show, and Hide protected operating system files cleared in File Explorer Options|View.
Windows 10 Enterprise Version 21H2 (OS Build 19044.1708) (64-bit)
PowerArchiver 2022 Version: 21.00.15 (03/2022) 64-bit
PowerArchiver Toolbox Edition Personal English
Disabling PowerArchiver context menu using Autoruns: on the Explorer tab, uncheck PowerArchiver64 under HKLM\Software\Classes\Folders\ShellEx\ContextMenuHandlers and the crash does not happen.
when clciking on powerarchiver update from within powerarchiver we get a windows for the update but it nows sayes script errors. I think it could be due to windows update in windows 10 can you look into it. By pressing cancel it seems to be ok. It seems that the page being displayed as erros on it.
From within PA on the extract popup, buttons are hidden, I must resize the window to get access to the OK/Cancel buttons. Tried on the default notebook screen (Macbook M1 Max 14") as well as on my external monitor (4k).Screenshot_2022-05-12_10-02-10.jpg
Ho già contattato il supporto con il modulo presente qui https://www.powerarchiver.com/it/contact/ da settimane ma non ho ricevuto riscontro e ora che ho aggiornato alla versione 21.00.15 ho notato che il problema persiste.
Quando clicco PDF Encrypt & Sign nel tab Crittografia appare la schemata riportata sotto come se mancassero le funzionalità.
I’ve already contacted support with the form here https://www.powerarchiver.com/it/contact/ weeks ago but I haven’t received any feedback and now that I’ve updated to version 21.00.15 I’ve noticed that the problem persists.
When I click on PDF Encrypt & Sign in the Encryption tab the schematic below appears as if the functionality is missing.
PA2010: Access violation in module PABACKUP.EXE
when i start my backup.pbs (works perfect with PA2009) i get this error message with PA2010:
“Access violation ad address 004EC7FA in module
PABACKUP.EXE. read of address 00000000.”
With the backup.pbs i back up 370MB and 3000 files (Windows XP).
are you updating backup archive or what exactly are you doing?
well without more info it is hard to know whats going on… you can try this interim version and see if that changes anything:
i simply start the backup.pbs file with a double-click to begin the backup.
Here the content of the backup.pbs file:
LogFile=C:\Dokumente und Einstellungen\Jochen\Eigene Dateien\Backups\Logs%backupscriptname%.txt
Text=Please find logs of the %backupscriptname% attached.
Subject=%backupscriptname% backup log
F1=C:\Dokumente und Einstellungen\All Users\Anwendungsdaten\SuperFlexibleSynchronizer\SuperFlexibleSynchronizer.ini
F2=C:\Dokumente und Einstellungen\Jochen\Anwendungsdaten\KeePass\KPSafe.kdb
F3=C:\Dokumente und Einstellungen\Jochen\Anwendungsdaten\MailWasherPro
F4=C:\Dokumente und Einstellungen\Jochen\Anwendungsdaten\Mozilla
F5=C:\Dokumente und Einstellungen\Jochen\Anwendungsdaten\SpeedProject\SpeedCommander 12
F6=C:\Dokumente und Einstellungen\Jochen\Anwendungsdaten\TVgenial
F7=C:\Dokumente und Einstellungen\Jochen\Favoriten
F8=C:\Dokumente und Einstellungen\Jochen\Lokale Einstellungen\Anwendungsdaten\Microsoft\Outlook
F9=D:\Games\World of Warcraft\Interface
F10=D:\Games\World of Warcraft\WTF
Info after a test:
The interim version produces the same error.
I couldn’t reproduce this error so need more information.
1. when does this error show up - during compressing (which is the last file) or before compressing starts (preparing phase)?
2. is this error with all scripts you have or with this specific - if with this specific, can you please try removing some files and see if it works?
3. turn on logging and send us back output log file.
4. try just changing destination archive name (from backup.zip to something else) - to see if there is maybe some problem with update in this case.
Please check your issue with latest 11.50.30 release:
and let us know if this works better now.
With this latest version i cannot reproduce the error anymore…
Seems to work now correctly. =)
(Only difference between 2009 and 2010 i recognized during test:
when the message appears that the backup is ready, with 2009 i could click on it and then scroll through the backuped files, when i click the message in 2010 all PA windows are closed instantly…)
you should be able to see your backup now after you click on ok, with beta 2. thanks