-
PA 2023 22.00.08
Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
Virtual driver PA 2023-01-28 152607.png
It seems a standard problem with new releases :-)
Can I have a link or can it be fixed. Thank you. CU later -
When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.
The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.
The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.
Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.
The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.
The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.
-
In PowerArchiver 2023 22.00.06 configuration, the option labelled “Start PowerArchiver 2023 Starter when my computer starts” seems to be redundant.
I am only allowed to change this option when PA Starter is disabled, and then it seems to be ignored.
When I enable PA Starter this option is forced to the enabled state.
I think it’d be good to remove “Start PowerArchiver 2023 Starter when my computer starts” completely. I’ve always found it confusing having both options.
Added later: However i don’t particularly want to use queue but I do like having the PAStarter icon in my tray area.
-
W10 Pro 22H2 - 64 -bit
PA 22.00.06 (PA 2023)
It has been the case with previous versions of PowerArchiver, but I had hoped that the latest might behave differently. Not so, I’m afraid.
I have, for various obscure reasons, created a few .pa archives, mainly in the hope that they will save me some more space. From time to time, I use the “Test” option to check that important archives are OK and uncorrupted.
With every .pa archive I’ve tested, the process runs through OK but then reports that there are errors. This is always the number of files in the archive e.g. if 11 files, then 11 errors reported.
In the .pa, I can:-
preview the files (usually PDF) extract some or all files and look at or use them convert the .pa to a .zip or .zipx archive, which then works fine and tests without errorsIs it the case that the Test routine isn’t designed for .pa archives, or is there another reason? Although the .pa seems to function properly, despite the test reporting errors, I would like to be sure that every .pa is OK and not “broken”.
Some of the .pas are quite old and produced with earlier PA versions (they are truly “archives”). If I extract all the files in the old .pa, create a new, fresh .pa and add back the files to that, then test the new, no errors (at least in the .pa I’ve tried this on) are reported. This would suggest a mismatch between old .pas and newer versions of PA itself.
-
-
Clipboard02.jpg
See the, supposedly, blank space where the green box is? It’s like that in Modern Light theme too. I can toggle it, but it’s missing text or shouldn’t be there I guess?
Thanks :)
-
Dear @Alpha-Testers and all of our users,
time has come for testing of PowerArchiver and PACL for macOS.
Please let us know here if you have Mac and can test latest builds.Features implemented:
PowerArchiver 2020 - tabbing, opening, extracting, adding, testing, favorite folders, support for multiple languages, opening via Finder, explorer mode, installer.
PACL 10 - support for most formats and features in Windows version.Upcoming: Tools such as archive converter, batch zip, multi-extract.
To start testing, please sign up here in this thread, and we will send you latest build.
thank you!
Ashampoo_Snap_Wednesday, November 20, 2019_12h54m56s_008_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m05s_009_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m14s_010_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m30s_011_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m39s_012_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m49s_013_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h56m00s_014_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h54m43s_007_.png
76e97ab9-8d75-4175-9ce8-446500031f38-image.png
-
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
ConexWare Account
-
Is there a way to change the password in the ConexWare shop account?
-
No, we can reset it if you want to random password…
-
Why does the download button in my account still have a direct link to PowerArchiver 2009 Beta 1?
-
“fixed”
-
No, we can reset it if you want to random password…
I really, really hate managing passwords this way. I understand that it provides at least a minimum amount of security for new passwords, but your eight-character random password is pretty damned minimum, and is transmitted in plain-text via email. That is, frankly, unacceptable on the internet as a standard practice.
It also makes those of us who go out of our way to do things like use random password managers that actually are strong grumpy. I came here to install a stronger password of 20 characters. And of all things I discover that the only explicit password reset mechanism is via the “lost password” link on the login page rather than the account maintenance page.
(C’mon… You clearly understand encryption strength having made this product already…)
-
He makes a valid point !
I too have been going through any and all accounts I have of late and used the 20 or 30+ random password characters
as opposed to my earlier choices. -
I really, really hate managing passwords this way. I understand that it provides at least a minimum amount of security for new passwords, but your eight-character random password is pretty damned minimum, and is transmitted in plain-text via email. That is, frankly, unacceptable on the internet as a standard practice.
It also makes those of us who go out of our way to do things like use random password managers that actually are strong grumpy. I came here to install a stronger password of 20 characters. And of all things I discover that the only explicit password reset mechanism is via the “lost password” link on the login page rather than the account maintenance page.
(C’mon… You clearly understand encryption strength having made this product already…)
Only security issue with CX account would be someone getting your password from us that you used on other websites as well, and thus using it to hack your other accounts that maybe have some important info or money.
There is nothing important on your CX account and guessing random password is nearly impossible.
But sure, if you guys want we could make it so you can change your password. Our worry is that for 99% of the users, this is going to be less secure because they will just use their kids name or something like that.
-
From 9/18 you can change the password to your conexware account… please check it out and let us know if it works fine. Thank you!
-
Since there was a product update, I logged in tonight to get the latest code. Seeing my pathetically simple password, I wanted to change it. But, I could not find a way to change it.
I searched the forums and found this post saying that as of 9/18, there is a way. But, I sure as heck can’t find it. :-(
Where can one change the shop account password? The only option I see is to change the email address.
-
Since there was a product update, I logged in tonight to get the latest code. Seeing my pathetically simple password, I wanted to change it. But, I could not find a way to change it.
I searched the forums and found this post saying that as of 9/18, there is a way. But, I sure as heck can’t find it. :-(
Where can one change the shop account password? The only option I see is to change the email address.
Hello Paul,
go to:
https://www.conexware.com/shop/click on Lost password… it will send you a link to change password to your email. Thanks!
-
Ah, I didn’t think to go there, since I knew my password :-)
Anyway, that worked!
Thanks!