-
Hi. The “Move” Action seems to be Not Working when used in the Tool – Batch Archive.
Using the Options – Configuration – Compression Profiles ---- I created a Profile with the Action of Move. Also set were Zip, and Method Deflate.
When I use the Tool - Batch Archive – It appears to me that the Action Move does not Move the compressed files (basically add to zip, and delete the added file from original location on the same disk). Zip file(s) are created and look ok.
Typically I on the Batch Archive process – I have selected options to
File’s Current Folder Group files from same folder into same archive Add subfolders to separate archivesMy PowerArchiver version is 21.00.15 .
Can you reproduce ? – Or do you need additional details or informatio?
-
I’m running PA 21.00.17 64-bit on a 64-bit i7 desktop with W10 Pro, latest version. This 32gb of installed RAM.
As I use the PA pbs system for a number of scheduled archiving operations throughout the day, PA Starter is set to load and run at system startup.
In the course of trying to identify some causes of slowness and bottlenecks in other processes, I notice that PA Starter (PAS) always runs at between 11% and 15% of CPU (see screenshot), usually at about 12-13%. This is by far the highest demanding process on the system, as shown by Task Manager. In Performance Monitor, PAS Average CPU is 8.32, with every other process at less that 1 i.e. in decimal places only.
Task Manager also shows PAS Power Usage as “Very High”, and is the only process shown thus.
I have looked again at the information about PAS at https://wiki.powerarchiver.com/en:help:details:powerarchiver_starter, which was last modified in 2016. The article states a low memory usage for PAS of 784k, which is fair enough, but it is the large CPU overhead which is of concern.
It is of course possible to change the PAS priority, but this has no effect on CPU overhead.
However, is it possible to change PAS, which is required only at intervals to initiate PA scheduled tasks, from consuming so much system resource for every moment of the day?
PA Starter.jpg
-
Hello,
PowerArchiver Command Line 7 support file greater than 2 Go ?
Thanks
-
i just registered my own copy and i need some help to set it…
if i set the ‘configuration>shell extension>open folder after extracting’ checkbox, after decompress an archive is opened the file manager on that folder but… if somebody is using a different file manager how to open XYplorer or Directory Opus for example and NOT the MS file manager?
consider this as a feature request also if not available within the 2022 version
-
I am looking for a way to stop the UAC elevation prompt when running Powerarchiver. In an old post about PA 2019, someone asked this and got a response to uncheck “all users” at the prompt but I am not seeing where one can do this. It definitely seems like the way to go though as if I click on “More Details” at the prompt I see that it is trying to run “_pautil.exe /paassociate /allusers /my(long binary string)”. Can you let me know? Thanks.
PS I tried renaming _pautil.exe and this worked, but I don’t know what the consequence of doing this may be so I would like to do this properly, thanks.
-
Just a question is Ashampoo zip pro 4 built by Powerrachiver as it is very similar and uses the pae encryption.
-
Hi,
Is it possible to transfer one of my existing PC Licenses to my MacBook? -
Re: Transfer PC License to MacBook iOS
Here is the email…
On Tue, Jun 7, 2022 at 1:20 PM Rich DiBenedetto rmdibened@gmail.com wrote:
Greetings,
Could you assist me with this?
Can I use my current licenses with MacOS?
If not, can I transfer a license to MacOS?Cheers and Have a Great Day,
RichOn Wed, Dec 9, 2020 at 6:35 AM ConeXware, Inc. ordering@conexware.com wrote:
Dear Richard DiBenedetto,Thank you for supporting PowerArchiver! Please find your activation and registration codes below.
*** Online Activation ***
PowerArchiver Select for PowerArchiver Toolbox English - LIFETIME
is valid until - not limited.E-Mail: RMDibened@gmail.com
Activation Code: *** -
There would be many of us with Intel Processors.
and they have their own optimized zlib algorithm, which can result in more efficiency if used combined with their hardware processor.
Reference:
https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/zlib-compression-whitepaper-copy.pdfCan we get the same Functionality Under Hardware Acceleration Feature?
Zlib is not the only feature that intel has included with their processor, there’s many, which if combined can result in efficient and better compression ratios.
-
-
Greetings, new customer searching for help and/or refund…
-
Hi Dear,
Cannot login and request resend license code for my fd
-
With PowerArchiver context menu enabled, it is crashing Windows 10 File Explorer when right-clicking on the Default User junction in C:\Users. Had 2021 installed, updated to today’s 2022, still getting same crash. Must have Hidden files and folders set to Show, and Hide protected operating system files cleared in File Explorer Options|View.
Windows 10 Enterprise Version 21H2 (OS Build 19044.1708) (64-bit)
PowerArchiver 2022 Version: 21.00.15 (03/2022) 64-bit
Licensed:
PowerArchiver Toolbox Edition Personal EnglishDisabling PowerArchiver context menu using Autoruns: on the Explorer tab, uncheck PowerArchiver64 under HKLM\Software\Classes\Folders\ShellEx\ContextMenuHandlers and the crash does not happen.
-
Hello,
When clicking on the main ribbon for a new version I get a script error message.
Actual version: 21.00.15 - French version
OS: W10 21H2 19044.1645Best regards
WilfridPS: Keep building such good software
-
when clciking on powerarchiver update from within powerarchiver we get a windows for the update but it nows sayes script errors. I think it could be due to windows update in windows 10 can you look into it. By pressing cancel it seems to be ok. It seems that the page being displayed as erros on it.
-
From within PA on the extract popup, buttons are hidden, I must resize the window to get access to the OK/Cancel buttons. Tried on the default notebook screen (Macbook M1 Max 14") as well as on my external monitor (4k).Screenshot_2022-05-12_10-02-10.jpg
-
Just uncompressed a RAR file that has a folder within, PA created the folder but the files inside are not being saved into folder because directory separator is a BACKSLASH (Windows style) instead of SLASH (macOS).Screenshot_2022-05-12_09-59-08.jpg
-
Ho già contattato il supporto con il modulo presente qui https://www.powerarchiver.com/it/contact/ da settimane ma non ho ricevuto riscontro e ora che ho aggiornato alla versione 21.00.15 ho notato che il problema persiste.
Quando clicco PDF Encrypt & Sign nel tab Crittografia appare la schemata riportata sotto come se mancassero le funzionalità.I’ve already contacted support with the form here https://www.powerarchiver.com/it/contact/ weeks ago but I haven’t received any feedback and now that I’ve updated to version 21.00.15 I’ve noticed that the problem persists.
When I click on PDF Encrypt & Sign in the Encryption tab the schematic below appears as if the functionality is missing.de9b4a2d-07e7-4323-a5a3-1b91e73dafc0-image.png
PowerArchiver 2007 and Blue Screens
-
Hey there, i’m new here, but i’m posting because i just downloaded the trial version of powerarchiver 2007. Problem now is that my computer is acting really strangely.
Everytime i run powerarchiver 2007, my computer goes into a Blue Screen of Death, and my whole system resets. I’ve tried running it in Safe Mode however, and it works.
My guess now is that perhaps there is a conflict with my other software running at the time… But i only have my firewall, ZoneAlarm Pro and my anti-virus, BitDefender v10 running. Apart from those i can’t see anything else that might be causing this. Any insight?
I’ve tried reinstalling over 5 times but i can’t get it working, so i have to stick to 2006 for the moment :( the gui for 2007 looks sweet though >.>
EDIT: Well, i’ve tried powerarchiver 2007 on my other laptop, and seems like the same thing is happenning. My guess would be that there is some software incompatibility since that laptop also runs similar software…
-
same thing only my computer is set to restart just before a blue screen accurs and thus havent found a way to solve it…
-
please email us via support form above, we are trying to find out what is the cause of the issue. We got 5-6 reports so far.
It doesnt seem to be the issue with external software so far, but email us and so we can get more info.
thank you
-
I’ve sent my error report in. I’m quite stunned though, what else could be causing the error if not for 3rd party programs.
Considering other users might have gotten it to work on their systems, i think its safe to say its a conflicting software issue.
I’m running XP Service Pack 2 Professional btw. I’m pretty sure that no one else atm runs XP SP1, and that if XP has issues with it, so would Vista, considering its a mess at the moment
-
I’ve sent my error report in. I’m quite stunned though, what else could be causing the error if not for 3rd party programs.
Considering other users might have gotten it to work on their systems, i think its safe to say its a conflicting software issue.
I’m running XP Service Pack 2 Professional btw. I’m pretty sure that no one else atm runs XP SP1, and that if XP has issues with it, so would Vista, considering its a mess at the moment
It is never that simple. We are trying to get several reports together to make sense of it and narrow down possible cause, so help is greatly appreciated.
I wish someone has reported it before final version though, we had several hundred thousands downloads of beta versions and nobody reported anything similar, althought it should have happened at that point. People always assume it will get fixed, somehow :D
-
yeah, i was fairly shocked that a final release would be one with such a major bug. Oh well, I trust in the PA staff to get it fixed anyway :) you guys are an awesome bunch.
EDIT: I was keeping myself in contact with the support staff of PA, and they did some debugging with me. Managed to churn out an exe which doesn’t crash my system, so i guess you guys can expect an updated release coming out soon :D
-
Download latest version (english only) via website or via web update and see if this issue has been fixed.
thanks,