-
Powerarchiver 2022
Right-click and select Encrypt on a folder does not work.
Although it says it encrypts, there is no encrypted file in the destination folder. -
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
The online update feature within the program suggests there is a later version than the ‘.17’ available on the web site. But clicking either download or update just reinstalls version .17.
Either there isn’t an update OR
the “download” and 'update" links should be repaired. -
Hi Dear,
Cannot login and request resend license code for my fd
-
Hi,
When you click on the Buy Now link, you come across four tabs - Home or Work, Enterprise Unlimited, Educational Discount, & Gift Discount.
What is the difference between a licence purchased via Gift Discount and a Home/Work licence?
Also, how can I renew the PowerArchiver Select plan a year after the purchase? Will it remind me automatically?
Best,
-
I’m running PA 21.00.17 64-bit on a 64-bit i7 desktop with W10 Pro, latest version. This 32gb of installed RAM.
As I use the PA pbs system for a number of scheduled archiving operations throughout the day, PA Starter is set to load and run at system startup.
In the course of trying to identify some causes of slowness and bottlenecks in other processes, I notice that PA Starter (PAS) always runs at between 11% and 15% of CPU (see screenshot), usually at about 12-13%. This is by far the highest demanding process on the system, as shown by Task Manager. In Performance Monitor, PAS Average CPU is 8.32, with every other process at less that 1 i.e. in decimal places only.
Task Manager also shows PAS Power Usage as “Very High”, and is the only process shown thus.
I have looked again at the information about PAS at https://wiki.powerarchiver.com/en:help:details:powerarchiver_starter, which was last modified in 2016. The article states a low memory usage for PAS of 784k, which is fair enough, but it is the large CPU overhead which is of concern.
It is of course possible to change the PAS priority, but this has no effect on CPU overhead.
However, is it possible to change PAS, which is required only at intervals to initiate PA scheduled tasks, from consuming so much system resource for every moment of the day?
PA Starter.jpg
-
I’m experiencing very slow extraction speed of multipart RAR files. For the first part the extraction is super fast but when PA reaches the part2.rar the extraction from there on gets super slow. PA needed for a 6,3 GB multipart archive 30 minutes to extract. I tested then with another program and it just took 70 seconds. I had this slow extraction speed with PA for quite a long time and I always thought that is maybe because of a high compression rate that the extraction would take longer. But it seems that only PA gets that slow.
I have lots of multipart archives that are 10+ GB and with PA it would be really time consuming. Is there any solution to this?
-
Hi. The “Move” Action seems to be Not Working when used in the Tool – Batch Archive.
Using the Options – Configuration – Compression Profiles ---- I created a Profile with the Action of Move. Also set were Zip, and Method Deflate.
When I use the Tool - Batch Archive – It appears to me that the Action Move does not Move the compressed files (basically add to zip, and delete the added file from original location on the same disk). Zip file(s) are created and look ok.
Typically I on the Batch Archive process – I have selected options to use a Profile with the Move Action.
File’s Current Folder Group files from same folder into same archive Add subfolders to separate archivesMy PowerArchiver version is 21.00.17 .
Can you reproduce ? – Or do you need additional details or information?
-
Hello,
PowerArchiver Command Line 7 support file greater than 2 Go ?
Thanks
-
i just registered my own copy and i need some help to set it…
if i set the ‘configuration>shell extension>open folder after extracting’ checkbox, after decompress an archive is opened the file manager on that folder but… if somebody is using a different file manager how to open XYplorer or Directory Opus for example and NOT the MS file manager?
consider this as a feature request also if not available within the 2022 version
-
I am looking for a way to stop the UAC elevation prompt when running Powerarchiver. In an old post about PA 2019, someone asked this and got a response to uncheck “all users” at the prompt but I am not seeing where one can do this. It definitely seems like the way to go though as if I click on “More Details” at the prompt I see that it is trying to run “_pautil.exe /paassociate /allusers /my(long binary string)”. Can you let me know? Thanks.
PS I tried renaming _pautil.exe and this worked, but I don’t know what the consequence of doing this may be so I would like to do this properly, thanks.
-
Just a question is Ashampoo zip pro 4 built by Powerrachiver as it is very similar and uses the pae encryption.
-
Hi,
Is it possible to transfer one of my existing PC Licenses to my MacBook? -
Re: Transfer PC License to MacBook iOS
Here is the email…
On Tue, Jun 7, 2022 at 1:20 PM Rich DiBenedetto rmdibened@gmail.com wrote:
Greetings,
Could you assist me with this?
Can I use my current licenses with MacOS?
If not, can I transfer a license to MacOS?Cheers and Have a Great Day,
RichOn Wed, Dec 9, 2020 at 6:35 AM ConeXware, Inc. ordering@conexware.com wrote:
Dear Richard DiBenedetto,Thank you for supporting PowerArchiver! Please find your activation and registration codes below.
*** Online Activation ***
PowerArchiver Select for PowerArchiver Toolbox English - LIFETIME
is valid until - not limited.E-Mail: RMDibened@gmail.com
Activation Code: *** -
There would be many of us with Intel Processors.
and they have their own optimized zlib algorithm, which can result in more efficiency if used combined with their hardware processor.
Reference:
https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/zlib-compression-whitepaper-copy.pdfCan we get the same Functionality Under Hardware Acceleration Feature?
Zlib is not the only feature that intel has included with their processor, there’s many, which if combined can result in efficient and better compression ratios.
-
-
Greetings, new customer searching for help and/or refund…
-
With PowerArchiver context menu enabled, it is crashing Windows 10 File Explorer when right-clicking on the Default User junction in C:\Users. Had 2021 installed, updated to today’s 2022, still getting same crash. Must have Hidden files and folders set to Show, and Hide protected operating system files cleared in File Explorer Options|View.
Windows 10 Enterprise Version 21H2 (OS Build 19044.1708) (64-bit)
PowerArchiver 2022 Version: 21.00.15 (03/2022) 64-bit
Licensed:
PowerArchiver Toolbox Edition Personal EnglishDisabling PowerArchiver context menu using Autoruns: on the Explorer tab, uncheck PowerArchiver64 under HKLM\Software\Classes\Folders\ShellEx\ContextMenuHandlers and the crash does not happen.
-
Hello,
When clicking on the main ribbon for a new version I get a script error message.
Actual version: 21.00.15 - French version
OS: W10 21H2 19044.1645Best regards
WilfridPS: Keep building such good software
powerarchiver starter 2021 high cpu usage
-
I recently installed PA 2021. But the PowerArchiver Starter, for my backups, keeps running at high CPU usage, I have to keep killing it, its running about 46% constantly.
I have Windows 10 Pro, 20H2, build 19042.662
Any ideas would be helpful.
Thanks
-
Hi @nlm
Are you running a certain operation through PA Starter that starts the CPU Spike?
We have tested starting a backup job through PA starter, which did not increase the CPU consumption of PA starter.
Let us know which steps you take when it happens and we will attempt to reproduce the issue using those steps.Thanks!
-
No operations were started by it. It is running so my weekly backup can run. I just manually run PAStarter, wait a few minutes, then it hits 20 - 50 % CPU cycles and stays there for at least 5 minutes, I close the app after that because its using the cpu to much.
-
Hi @nlm
Have tested this by having PASTARTER.EXE turned on for a couple of days now. Ran some backups through PA Starter for testing and it has consistently stated at 0% CPU usage, as in below screenshot.
Is there an anti-virus program active that might be causing it?Thanks!
-
I have another thread,
https://forums.powerarchiver.com/topic/6288/powerarchiver-queue-made-worse
PAStarter is used for queuing mostly. and for quicker launch
I do have some CPU utilization as per video, but no compression was going on.
As, in 2000kb of RAM usage, you cannot compress anything
-
I disabled my AntiVirus, just to see, didn’t help. A couple of things, w/my last version PA2019 I didn’t have this problem. Also, I keep thinking I could right click on the PAStarter in the past and open up to PowerArchiver, but I can’t seem to do this with the new version. I tried running as Admin, same issue.
-
@Mili
Can you please post screenshot of the PA version that you are using from about? -
Here is TaskManager snip
-
In regards to the last reply, I just started PAStarter and it had been running for about a minute, and its very high even when its not doing anything.
-
Ok, I should have done this first. I upgraded to PA 2021, instead of uninstalling and reinstalling. I did that now, and it took care of the problem. Must have been something with upgrading from the previous version too the new one.