-
PA2023 Win10, (same problem with older releases but never reported)
PA Soft is installed on partition D. (exclusive for installed progs)
Then I created on my partition G: the folders as configured in PA Settings ‘Folders’.0fcf1b09-1b91-4b74-b250-f8cf908a3348-Ashampoo_Snap_maandag 20 maart 2023_11h54m34s.png
Screenshot 2023-03-20 121152.png
The problem : Any activity on PA is saved in these folders…
PA ignores them and still use the default settings. Whats wrong ? Regards, Pirrbe -
I am still using Powerarchiver 2022 and it does not show pdf markups in the preview. Is there a setting to get version 2022 to show pdf markups in the preview? If not, does this work in version 2023?
-
The question that I have about PA archives is what happens if say ConeXware, as a company, dies in the future? What happens to any PA files that are created today? Can these files be decompressed with a copy of a PowerArchiver that can no longer phone home to the mothership thus can’t be registered or activated?
I mean, I can understand that new PA files wouldn’t be able to be created if the program isn’t registered but what about an un-registered copy because well, the question that I posed above?
It’s questions like this that make me not want to store anything really valuable in PA files out of fear that I, at some point in the future, might lose access to said data inside those files. OK, 7ZIP might not be able to compress as heavily as PA but at least it’s open source and any 7ZIP files will still be able to be read and decompressed ten, twenty, or fifty years from now.
-
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
-
Is this a known problem? Is there a fix coming? This is a primary reason I buy PA.
I’ve tried both methods I know to extract multiple zips at the same time. 1) Multi Extract feature in the GUI. 2) In Windows File Explorer, select multiple zips, right click, use PA context menu to Extract or Extract To…
Is there a setting I missed? Or maybe it really is processing in parallel, but I can’t detect it? Nothing tells me in the Processes in Task Manager that multiple PA extracts are running. And my CPU, memory and disk resources do not look like a lot of extracts are running.
I’m using PA 2022 Standard version 21.00.18 on Windows 11 Pro version 10.0.22621 Build 22621.
-
In the latest version of PA, on W11 (latest build/SP) when you try to use the first level context menu - NOTHING HAPPENS (particularly when you do this from Downloads or Documents folders) - however I noticed that it DOES WORK when you use the context menu from the Desktop. Going to the second level context menu does work however.
-
-
PA 2023 22.00.08
Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
Virtual driver PA 2023-01-28 152607.png
It seems a standard problem with new releases :-)
Can I have a link or can it be fixed. Thank you. CU later -
Hi there, been a user since 13 years now and in past whenever I had a problem or question I could email, however since 3 weeks it seems like everybody is dead?
Anyway, as kind of a last resort, I post this email a 4th time but in this forum instead now, in the hope for help:
"This is the 3rd time I am emailing you guys as I am missing a working code for the preview of Power Archiver 2023Can you please help me? I am a 13 years lasting customer of yours, and I am shocked thatr for whatever reason my support tickets are ignored now, why?
thanks in advance!
All the best!
Joerg" -
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
-
When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.
The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.
The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.
Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.
The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.
The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.
SOLVED PA 19.00.51 - bug / unwanted code execution
-
Hi.
I have found out that, if there is a folder inside an archive and the user extracts it, there is potential unwanted code execution in the function “open file location”, provided the name of the folder is the same as the name of the exe file in the parent directory.
If in the same directory of the extracted folder / subfolder there is an exe with the same name as the extracted directory, if ‘open folder when completed’ function is checked, PowerArchiver will open the exe in the parent directory, named the same as the folder being extracted, instead of opening the actual subfolder, named the same as the .EXE in the parent folder.
To ease the confusion of my words, I have made a youtube video demonstrating this PoC:
Youtube link (unlisted) with PoC
Thank you!
For any questions please contact me and I will try to explain more if applicable.
-
@2Flo please try with following release:
https://forums.powerarchiver.com/topic/6189/fast-ring-powerarchiver-2019-19-00-51-54-57and let us know if this works fine… also send us an email to support@conexware.com to get free license for PA 2019 Toolbox, for important bug discovery. Thank you!
-
@2Flo
Thanks very much for the thorough details. Was able to reproduce this immediately and have logged it in for fixing. -
@2Flo please try with following release:
https://forums.powerarchiver.com/topic/6189/fast-ring-powerarchiver-2019-19-00-51-54-57and let us know if this works fine… also send us an email to support@conexware.com to get free license for PA 2019 Toolbox, for important bug discovery. Thank you!
-
@spwolf thank you so much for your contribution as well!
I actually do have a lifetime license for PA Toolbox that I’ve bought from your website so it would not be fair to profit for a second license in this case. The fact that the bug was worked on to be solved is more important for me.
I will test it later today or tomorrow and let you know since I’m not home right now. And I will provide all the relevant details.
-
@2Flo said in PA 19.00.51 - bug / unwanted code execution:
@spwolf thank you so much for your contribution as well!
I actually do have a lifetime license for PA Toolbox that I’ve bought from your website so it would not be fair to profit for a second license in this case. The fact that the bug was worked on to be solved is more important for me.
I will test it later today or tomorrow and let you know since I’m not home right now. And I will provide all the relevant details.
if you want, you can gift this license to someone as well.
Please check it out and let us know. Thanks!
-
@spwolf thank you so much!
Later today i will confirm whether the bug is fixed first and i will give out the license as a gift.
Sharing is caring :)
Stay tuned for future update soon.
-
I have only one question about the license (to know what to tell the person i will gift it to).
Does it cover future program updates and upgrades or only the minor updates for the latest major version?
Thank you!
-
@spwolf I just tested it
Extracted it 4 more depths inside folders (7 folders in total) than the last try, which was 3 folders in depth. Same settings
The program was not executed. It seems that the fix has worked :D
Thank you all for your involvement in fixing this bug!