-
PA Queue does not compress file optimally with same parameters if used in Queue mode.
Being able to save advanced option, and set a default profile and archive type for compression so I can save clicks.
The above two are majorly affecting my efficiency with archiving stuff with PA 20.10.03.
Can someone confirm if they are resolved with the 2022 RC1?
-
Hi,
I thought, I’ll give it a try and upgrade my PA 2018 Toolbox on my production machine to PA 2021 (20.10.03)
Sending registration codes in your order recovery doesn’t seem to work at the moment (I also checked my junk folder), online activation works Using registry to disable modules (for example HKLM\SOFTWARE\PowerArchiverInt\General\DisableBurning) doesn’t work as expected with modern ui. The module is visible, but I’ll get the trial nag, if I try to open it. It’s almost fine in classic and ribbon mode.7989017c-3cd2-4a99-a1f6-06ce62329dec-image.png
“DisableClouds” and “DisableExplorer” seem not to be respected at all, while the classic UI seems to respect the setting to disable any other unused module:
In settings I won’t be able to access the SmartAI settings and the settings for the internal editor if the FTP module is disabled
89843f23-ad89-45bf-92bc-406b1a11dfc9-image.pngcc40877b-d8d0-404c-b7f8-d5ae0a1ee445-image.png
-
I’m running W10 Pro on an HP i-7 machine with now 32gb of RAM. The system drive is an SSD.
In the course of sorting out some inconsistencies in a couple of my .pbs jobs, I’ve been paying close attention to the system CPU resource and power consumption of PA Starter, as shown by the various resource management tools. I’ve also been trying to identify why my system seems rather sluggish despite some extensive tuning for speed etc.
When I have enabled Starter as a start-up programme, to use the PA Queue facility, I see that Starter consistently uses between 10-13% of CPU, with High Power consumption indicated. It runs, consuming this resource, irrespective of what may be happening with PA and any pbs script jobs.
I can understand a need to use a good chunk of CPU when Starter is actually handling PA jobs, but it shouldn’t sit and consume this amount when it really isn’t doing anything but wait for a job to start and for which it is needed.
Perhaps I’ve missed a way of lessening Starter’s impact, but in the meantime I’ve adjusted my set-up to running PA without it.
Suggestions, please.
-
Bug: When I use the right button on any folder to bring up the menu and click on e.g. compress or decompress, the program still requires registration even if it is correctly registered. When working with the folder, via the running Power Archiver, everything is fine. (Windows 10 - v. 20.10.03)
-
Dear @Alpha-Testers and all of our users,
time has come for testing of PowerArchiver and PACL for macOS.
Please let us know here if you have Mac and can test latest builds.Features implemented:
PowerArchiver 2020 - tabbing, opening, extracting, adding, testing, favorite folders, support for multiple languages, opening via Finder, explorer mode, installer.
PACL 10 - support for most formats and features in Windows version.Upcoming: Tools such as archive converter, batch zip, multi-extract.
To start testing, please sign up here in this thread, and we will send you latest build.
thank you!
Ashampoo_Snap_Wednesday, November 20, 2019_12h54m56s_008_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m05s_009_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m14s_010_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m30s_011_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m39s_012_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m49s_013_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h56m00s_014_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h54m43s_007_.png
76e97ab9-8d75-4175-9ce8-446500031f38-image.png
-
Hi,
The window size is suddenly “large” Resizing the window to normal size works for the current action, but isn’t remembered The next time I’m using the shell extension, the window is large again, so it seems the size change isn’t saved
I’ve got a strange behavior with the progress window in PowerArchiver 2021 shell extension:The progress window of PowerArchiver itself has its normal size.
Is there a possibility to reset the shell extension window size?
-
There would be many of us with Intel Processors.
and they have their own optimized zlib algorithm, which can result in more efficiency if used combined with their hardware processor.
Reference:
https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/zlib-compression-whitepaper-copy.pdfCan we get the same Functionality Under Hardware Acceleration Feature?
Zlib is not the only feature that intel has included with their processor, there’s many, which if combined can result in efficient and better compression ratios.
-
Windows 10 extraction does a better extraction job than Power Archiver which chooses not to work much of the time. I’ve tried uninstalling/reinstalling it
Version 20.10.03
-
The support doesn’t answer my email about a license question for weeks, because despite a lifetime license Powerarchiver refuses some functions
-
Scusate non so a chi rivolgermi, ho regolarmente pagato tramite Poy Pol ma non mi è pervenuto il codice di attivazione, ho quello vecchio ma presumo che non sia più valido, a chi devo rivolgermi?
Spero che mi possiate aiutare indicandomi cosa devo fare.
Grazie -
I have a “USB2.0” DVD-RW drive with a blank 700MB CD-R inserted.
Windows 10 sees in just fine explorer and it’s usable, and works.
However it is not showing in any dropdown in PowerArchiver.Thanks for any help…
PowerArchiver 20.10.02 (05/2021) 64-bit
Windows 10 Pro
20H2 build: 19042.1348
Windows Feature Experience Pack 120.2212.3920.0 -
I’m using 20.10.02. When I try to drag files from an opened zip to a folder in Windows File Explorer, PA does nothing. It uses a CPU core and starts the clock, but no action is taken. I have to end task in task manager to get it to close.
-
6e4196e6-d59c-4870-b27e-80c5ae60e4d7-image.png
see image. the bottom of yes and no are cut off
-
Will PA 2022 still support windows 10 as majority of people can’t upgrade and won’t till 2025
-
Hello,
PowerArchiver Command Line 7 support file greater than 2 Go ?
Thanks
-
I’ve found a bug when trying to test an encrypted, 28-volume 7-zip archive of a 18.3 GB folder containing 41,751 files. The test fails, showing errors in all files.
Here’s the folder I compressed, and the 28 resulting files:Archives
Here’s the multi-volume compressed file opened in PA, showing the total file count and the full archive size:Opened in PowerArchiver
And here’s the test results screen after I click Actions -> Test…, showing an incorrect file count and archive size (this seems to be the file size of the first volume alone):Testing results
One important detail about the test screen above is that PA opens an UAC prompt asking for privileged execution before starting the test. Is this the expected behavior? It seems PA wouldn’t need higher execution privilege since everything it’s touching is owned by my own user.
In any case, granting or denying the UAC prompt results in the exact same screen.
Now, if instead of testing the archive I tell PA to extract the contents, the operation works fine (and with no UAC prompts):Extracting
With the Properties panel for both folders, the original and the extracted one, showing the exact same file count and total size:Extract results
I hope this helps. 🙂
-
Hi,
Currently on the 2021 20.00.55, updated, and licensed.
I have been facing this issue since 2019 version.
Queues don’t actually do anything
That I run powerarchiver starter as admin, or without admin.Then I queue some files, and most of the files take forever, to go from 1% to 2%
and let’s say if the 5th of total 10 files are stuck that should mean the other 4 should be completed, but no, the directories are just like that.
Using Queue feature makes the Powerarchiver to process and compress files, but the PA archives do no appear, neither the disk’s total used space changes.
However if I manually compress files without queuing, no matter if I run multiple compression or one by one, there’s always success.
sometimes compression is stuck at certain percentage for a 50 or 200 MB file, forever.
I want to speed up multiple compression, I find the batch compression feature useless, as I cannot configure any custom parameters or advanced option under PA archive format
So, Let me save parameters(Advanced Option) of Profiles
i) Either I should be able to customize PA Default profile, so I don’t have to select files and manually select profile, but not even single parameter can be saved
ii) Or I should be able to create a new profile and be able to set that as default.
It’s end of 2020 and I have been trying to reach Powerarchiver team to add this, but no one wants to listen or do anything.Refer case PA-FCW-TLNFM-096
I still cannot save parameters under advanced options like DDL/EXE filter to delta, or PNG PDF Filter, or set zlib to 9 or dictionary size or experimental stuff.
Soo many Revisions and versions released but I still cannot have a profile saved with whatever I want, be it existing or new profile.
Don’t you guys at Powerarchiver labs get frustrated everytime you have to configure these parameters manually?
When I stop an ongoing compression process, that is stuck or let’s say it’s not stuck but I click on cancel and then on No, it still continues compression for no reason.
If I start compression and pause, the progress bar shortly(progresses) reaches to completion, but no compression is done, and then archive is stuck forever
Just cancel itFor all my claims above I have sent ticket today with screenshots from my registered email.
if you can:
Batch archive is good idea, but if I have multiple directories inside directories, then I want first child directory to have all of it’s subdirectory compressed to that same first child directory
Example
I have a folder in D:\pics
that folder has following folder
Cats
Dogs
FishesEach of the above folder has sub folder:
Black
White
Fluffy
ColorfulI want those sub folders(black, white, colorful, fluffy) not to be compressed individually, but the cats, dogs and fishes folders to be compressed individually
-
Dear PowerArchiver Team!
As I unfortunately found out, there is a big bug in Powerarchiver, which causes the compression rate to drop really significantly! I wonder if no one has noticed this yet? Are you guys still actively developing?
The following error occurs! (This is already as I find a blatant error!).ERROR:
File extensions and formats are not recognized automatically! If a file name e.g. Mütze.jpg is simply “renamed” in Mütze.txt, or
Mütze.png, Mütze.mp3, Mütze.pdf etc. each time a DIFFERENT compression algorithm is performed on the SAME FILE! Remember! The file extension was only renamed, so the file extension e.g. from .jpg to .txt is only by Rename changed! Just take a .jpg or .txt or .pdf file and change the file extension, you will see see this error! No headers are read automatically! Is this really wanted?Then the perfect compression algorithm can never be found and optimized by PowerArchiver? You should investigate this dramatic error once absolutely!Greetings from your trusty Konglomat!
Please stay healthy and make PowerArchiver more powerful than ever! I am looking forward to future updates! You are still awesome! Please keep up the good work! I love PowerArchiver, really more than just about anything!And will probably buy and use it for eternity!
-
Configuration:
Powerarchiver 2021 20.00.73
Windows 10 Education 10.0.19042 Build 19042When extracting gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf.tar.xz , Powerarchiver wrongly thinks some .exe files have a length of zero:
98773b3b-65c0-48fa-8cd4-d081b2e0adee-image.png
Once extracted:
D:\Temp\Powerarchiver\gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf\bin>dir *.exe Volume in drive D is DATA Volume Serial Number is 0E12-BCA2 Directory of D:\Temp\Powerarchiver\gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf\bin 2020-11-20 07:10 PM 1,391,599 arm-none-linux-gnueabihf-addr2line.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ar.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-as.exe 2020-11-20 07:41 PM 3,030,119 arm-none-linux-gnueabihf-c++.exe 2020-11-20 07:10 PM 1,389,293 arm-none-linux-gnueabihf-c++filt.exe 2020-11-20 07:41 PM 3,027,513 arm-none-linux-gnueabihf-cpp.exe 2020-11-20 07:10 PM 4,040,503 arm-none-linux-gnueabihf-dwp.exe 2020-11-20 07:10 PM 391,769 arm-none-linux-gnueabihf-elfedit.exe 2020-11-20 07:41 PM 0 arm-none-linux-gnueabihf-g++.exe 2020-11-20 07:41 PM 3,026,926 arm-none-linux-gnueabihf-gcc-10.2.1.exe 2020-11-20 07:41 PM 609,607 arm-none-linux-gnueabihf-gcc-ar.exe 2020-11-20 07:41 PM 609,607 arm-none-linux-gnueabihf-gcc-nm.exe 2020-11-20 07:41 PM 609,607 arm-none-linux-gnueabihf-gcc-ranlib.exe 2020-11-20 07:41 PM 0 arm-none-linux-gnueabihf-gcc.exe 2020-11-20 07:41 PM 2,165,533 arm-none-linux-gnueabihf-gcov-dump.exe 2020-11-20 07:41 PM 2,343,605 arm-none-linux-gnueabihf-gcov-tool.exe 2020-11-20 07:41 PM 2,450,233 arm-none-linux-gnueabihf-gcov.exe 2020-11-20 07:54 PM 9,605,899 arm-none-linux-gnueabihf-gdb.exe 2020-11-20 07:41 PM 3,028,997 arm-none-linux-gnueabihf-gfortran.exe 2020-11-20 07:10 PM 1,412,943 arm-none-linux-gnueabihf-gprof.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ld.bfd.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ld.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ld.gold.exe 2020-11-20 07:41 PM 25,546,567 arm-none-linux-gnueabihf-lto-dump.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-nm.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-objcopy.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-objdump.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ranlib.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-readelf.exe 2020-11-20 07:10 PM 1,393,083 arm-none-linux-gnueabihf-size.exe 2020-11-20 07:10 PM 1,392,464 arm-none-linux-gnueabihf-strings.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-strip.exe 32 File(s) 67,465,867 bytes 0 Dir(s) 1,002,422,431,744 bytes freeWhen the same archive is being extracted from a git bash session (after having installed git 2.30.1 for Windows 64 bit version from git-scm.com), the .exe files are extracted as expected:
xz -k -d gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf.tar.xz tar xf gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf.tar cd gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf/bin ll *.exe -rwxr-xr-x 1 User 197121 1391599 Nov 20 19:10 arm-none-linux-gnueabihf-addr2line.exe* -rwxr-xr-x 2 User 197121 1421598 Nov 20 19:10 arm-none-linux-gnueabihf-ar.exe* -rwxr-xr-x 2 User 197121 2028927 Nov 20 19:10 arm-none-linux-gnueabihf-as.exe* -rwxr-xr-x 2 User 197121 3030119 Nov 20 19:41 arm-none-linux-gnueabihf-c++.exe* -rwxr-xr-x 1 User 197121 1389293 Nov 20 19:10 arm-none-linux-gnueabihf-c++filt.exe* -rwxr-xr-x 1 User 197121 3027513 Nov 20 19:41 arm-none-linux-gnueabihf-cpp.exe* -rwxr-xr-x 1 User 197121 4040503 Nov 20 19:10 arm-none-linux-gnueabihf-dwp.exe* -rwxr-xr-x 1 User 197121 391769 Nov 20 19:10 arm-none-linux-gnueabihf-elfedit.exe* -rwxr-xr-x 2 User 197121 3030119 Nov 20 19:41 arm-none-linux-gnueabihf-g++.exe* -rwxr-xr-x 2 User 197121 3026926 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-10.2.1.exe* -rwxr-xr-x 1 User 197121 609607 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-ar.exe* -rwxr-xr-x 1 User 197121 609607 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-nm.exe* -rwxr-xr-x 1 User 197121 609607 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-ranlib.exe* -rwxr-xr-x 2 User 197121 3026926 Nov 20 19:41 arm-none-linux-gnueabihf-gcc.exe* -rwxr-xr-x 1 User 197121 2165533 Nov 20 19:41 arm-none-linux-gnueabihf-gcov-dump.exe* -rwxr-xr-x 1 User 197121 2343605 Nov 20 19:41 arm-none-linux-gnueabihf-gcov-tool.exe* -rwxr-xr-x 1 User 197121 2450233 Nov 20 19:41 arm-none-linux-gnueabihf-gcov.exe* -rwxr-xr-x 1 User 197121 9605899 Nov 20 19:54 arm-none-linux-gnueabihf-gdb.exe* -rwxr-xr-x 1 User 197121 3028997 Nov 20 19:41 arm-none-linux-gnueabihf-gfortran.exe* -rwxr-xr-x 1 User 197121 1412943 Nov 20 19:10 arm-none-linux-gnueabihf-gprof.exe* -rwxr-xr-x 4 User 197121 2572182 Nov 20 19:10 arm-none-linux-gnueabihf-ld.bfd.exe* -rwxr-xr-x 4 User 197121 2572182 Nov 20 19:10 arm-none-linux-gnueabihf-ld.exe* -rwxr-xr-x 2 User 197121 4550029 Nov 20 19:10 arm-none-linux-gnueabihf-ld.gold.exe* -rwxr-xr-x 1 User 197121 25546567 Nov 20 19:41 arm-none-linux-gnueabihf-lto-dump.exe* -rwxr-xr-x 2 User 197121 1404945 Nov 20 19:10 arm-none-linux-gnueabihf-nm.exe* -rwxr-xr-x 2 User 197121 1531656 Nov 20 19:10 arm-none-linux-gnueabihf-objcopy.exe* -rwxr-xr-x 2 User 197121 1991350 Nov 20 19:10 arm-none-linux-gnueabihf-objdump.exe* -rwxr-xr-x 2 User 197121 1421598 Nov 20 19:10 arm-none-linux-gnueabihf-ranlib.exe* -rwxr-xr-x 2 User 197121 1163376 Nov 20 19:10 arm-none-linux-gnueabihf-readelf.exe* -rwxr-xr-x 1 User 197121 1393083 Nov 20 19:10 arm-none-linux-gnueabihf-size.exe* -rwxr-xr-x 1 User 197121 1392464 Nov 20 19:10 arm-none-linux-gnueabihf-strings.exe* -rwxr-xr-x 2 User 197121 1531656 Nov 20 19:10 arm-none-linux-gnueabihf-strip.exe*The same archive file does extract properly under a native Linux Ubuntu 20.04 system, or under Windows 10 using the WSL2 Linux subsystem using xz and tar.
-
Hi! I came across an issue when I tried to uninstall PowerArch 2013. I got an error “The specified account already exists” which broke the process. I got the same error when I tried to install the current version, without uninstalling the previous one.
So I can’t uninstall and I can’t install PowerArchiver. Any suggestions? OS Windows 8.1 x64.Dariusz
SOLVED Power Archiver 20018 and Outlook 2016
-
HI.
Today I installed Office 2016 and now I have here a Little Problem.
Bevor Office 2016 I used Office 2007.
And there I was in Outlook 2007 able to configurate the Plugin in the Options menu.
In the menu Options i had a Register for PowerarchiverBut in Outlook 2016 I can’t find the configuration window for the Powerarchiver Plugin.
So where can I find it so that I configurate it?Office 2016 is a Little bit different from the handling than Office 2007
I mean the config windows which you can see here on the screenshots.
https://www.powerarchiver.com/de/powerarchiver-for-outlook-plugin-paop/In Outlook 2007 I had this configuration Regsiter to config the powerarchiver plugin.
But I can’t find such an config register/window under Outlook 2016.MfG
MDuss -
@MDuss Hello,
Here is updated installer that should fix this issue:
https://powerarchiver.cachefly.net/2019/paop30009.exePlease check it out and let us know.
Problem was that due to whatever changes in Office 2016 update, we were not able to properly detect the version used (x86 or x64) and installer installed x86 version even when Office x64.
It seems to have affected Win7 x64 and Office 2016 x64 builds only.
We have changed the installer to use different method of detection and now it should work fine.
thank you!
-
@MDuss If you go to Outlook> Options> Add-in Options, click on PowerArchiver and then Add-In Options button to configure it.
If you download and install 3.04 version of PAOP, then you will see Configuration right in PowerArchiver tab.
thanks!
-
Hi spywolf.
And here is my problem. I have installed the PAOP 3.04 and I have no entry at the Add-In.
The Add-In was my first point which i checked after the installation.Here is a screenshot from the add-in Windows:
https://www.bilder-upload.eu/bild-6a5e16-1545654220.jpg.htmlSo you can see, there is no entry for powerarchiver.
When I try the Version 2.40.03 I have the same. No entry in Outlook.
MfG
MDuss -
@MDuss said in Power Archiver 20018 and Outlook 2016:
Hi spywolf.
And here is my problem. I have installed the PAOP 3.04 and I have no entry at the Add-In.
The Add-In was my first point which i checked after the installation.Here is a screenshot from the add-in Windows:
https://www.bilder-upload.eu/bild-6a5e16-1545654220.jpg.htmlSo you can see, there is no entry for powerarchiver.
When I try the Version 2.40.03 I have the same. No entry in Outlook.
MfG
MDussdid you restart outlook after installation?
-
@MDuss said in Power Archiver 20018 and Outlook 2016:
https://www.bilder-upload.eu/bild-6a5e16-1545654220.jpg.html
From this screenshot, you can see, that it’s Outlook x64, while there was only an x86 version of Outlook 2007. Maybe you need to reinstall PAOP, that the x64 plugin is installed correct?
-
HI.
I have reinstalled the PAOP Plug in and restart Outlook, even my computer.
Or should I try Office 2016 in 32-bit Version?
MfG
MDuss -
I’m not using Outlook (and therefore no PAOP), but the information on the homepage says, both x86 and x64 version are supported by PAOP, so this shouldn’t matter!?
-
Normaly I would say yes, but sometimes it does matter.
At first I used Office 2007 Enterprise 32-Bit and the powerarchiver plugin 2.40.03.
Now I use Office 2016 Professional Plus with the powerarchiver plugin 3.04.I reinstalled both powerarchiver plugins more than one time. Both togehter and both seperatly. It have no effect in outlook 2016.
The plugin will not apear in the oulook 2016 add-ins so i can not configurate and use this plugin.MfG
MDuss -
On my test machine AutoRuns doesn’t recognize PAOP as Office Plugin after installation.
In your Registry, you should have a key
HKEY_CLASSES_ROOT\PAOPLibrary.OlAddIn
at least, this is the name on my test machine.
Check if HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins has a subkey PAOPLibrary.OlAddIn
If I add this key, on my system, AutoRuns recognizes PAOP as Office plugin. Maybe this suffices for Outlook, too? -
Hi BigMike.
Under the Key HKEY_CLASSES_ROOT
I have two entrances.- PAOPLibrary.OlAddIn
and there is the subfolder with the name Clsid - PAOPLibrary.OptionPage
and there is also a subfolder with the name Clsid
In the area HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins
I haven’t an entry with the name PAOPLibrary.OlAddInMfG
MDuss - PAOPLibrary.OlAddIn
-
@BigMike said in Power Archiver 20018 and Outlook 2016:
On my test machine AutoRuns doesn’t recognize PAOP as Office Plugin after installation.
In your Registry, you should have a key
HKEY_CLASSES_ROOT\PAOPLibrary.OlAddIn
at least, this is the name on my test machine.
Check if HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins has a subkey PAOPLibrary.OlAddIn
If I add this key, on my system, AutoRuns recognizes PAOP as Office plugin. Maybe this suffices for Outlook, too?Could you maybee extract the registry entry from the
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins
for the power archiver plugin?
Maybee I can bring the plugin to work with this when I integragte this entries.It seams that the setup can not create this entries in the windows registry. But I have no idea why there is this problem.
MfG
MDuss -
@MDuss said in Power Archiver 20018 and Outlook 2016:
@BigMike said in Power Archiver 20018 and Outlook 2016:
On my test machine AutoRuns doesn’t recognize PAOP as Office Plugin after installation.
In your Registry, you should have a key
HKEY_CLASSES_ROOT\PAOPLibrary.OlAddIn
at least, this is the name on my test machine.
Check if HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins has a subkey PAOPLibrary.OlAddIn
If I add this key, on my system, AutoRuns recognizes PAOP as Office plugin. Maybe this suffices for Outlook, too?Could you maybee extract the registry entry from the
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins
for the power archiver plugin?
Maybee I can bring the plugin to work with this when I integragte this entries.It seams that the setup can not create this entries in the windows registry. But I have no idea why there is this problem.
MfG
MDussHello,
can you let us know what version of office it is exactly and what Windows, and we will test with it… But keep in mind that PAOP, both 2.x and 3.x have been in use with Office 2016 for a very long time, and we have been using it on our own 10+ computers also for very long time. It is a very strange issue, but maybe some update changes something.
Right now we all moved to latest 2019, but we have virtual machines with older windows and office of course.
thanks!
-
@spwolf said in Power Archiver 20018 and Outlook 2016:
@MDuss said in Power Archiver 20018 and Outlook 2016:
@BigMike said in Power Archiver 20018 and Outlook 2016:
On my test machine AutoRuns doesn’t recognize PAOP as Office Plugin after installation.
In your Registry, you should have a key
HKEY_CLASSES_ROOT\PAOPLibrary.OlAddIn
at least, this is the name on my test machine.
Check if HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins has a subkey PAOPLibrary.OlAddIn
If I add this key, on my system, AutoRuns recognizes PAOP as Office plugin. Maybe this suffices for Outlook, too?Could you maybee extract the registry entry from the
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins
for the power archiver plugin?
Maybee I can bring the plugin to work with this when I integragte this entries.It seams that the setup can not create this entries in the windows registry. But I have no idea why there is this problem.
MfG
MDussHello,
can you let us know what version of office it is exactly and what Windows, and we will test with it… But keep in mind that PAOP, both 2.x and 3.x have been in use with Office 2016 for a very long time, and we have been using it on our own 10+ computers also for very long time. It is a very strange issue, but maybe some update changes something.
Right now we all moved to latest 2019, but we have virtual machines with older windows and office of course.
thanks!
Hi spywolf.
I use Windows 7 Ultimate 64-Bit edition.
At first I used Office 2007 Enterprise and the Outlok Plugin 2.40.02. The Outlook Plugin works fine with Outlook 2007.Now I use Office 2016 Professional Plus 64-Bit and I wanted to use the Outlook Plugin 3.04 which I have installed.
But this Plugin and the Version 2.40.02 will not show up in Outlook 2016.I have deinstalled and reinstalled the plugins more than once. Only the old, only the new and both together and nothing works.
At the moment I have installed only the Version 3.04.I can not use Office 2019 because this version will not run under Windows 7.
MfG
MDuss -
@MDuss said in Power Archiver 20018 and Outlook 2016:
@spwolf said in Power Archiver 20018 and Outlook 2016:
@MDuss said in Power Archiver 20018 and Outlook 2016:
@BigMike said in Power Archiver 20018 and Outlook 2016:
On my test machine AutoRuns doesn’t recognize PAOP as Office Plugin after installation.
In your Registry, you should have a key
HKEY_CLASSES_ROOT\PAOPLibrary.OlAddIn
at least, this is the name on my test machine.
Check if HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins has a subkey PAOPLibrary.OlAddIn
If I add this key, on my system, AutoRuns recognizes PAOP as Office plugin. Maybe this suffices for Outlook, too?Could you maybee extract the registry entry from the
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins
for the power archiver plugin?
Maybee I can bring the plugin to work with this when I integragte this entries.It seams that the setup can not create this entries in the windows registry. But I have no idea why there is this problem.
MfG
MDussHello,
can you let us know what version of office it is exactly and what Windows, and we will test with it… But keep in mind that PAOP, both 2.x and 3.x have been in use with Office 2016 for a very long time, and we have been using it on our own 10+ computers also for very long time. It is a very strange issue, but maybe some update changes something.
Right now we all moved to latest 2019, but we have virtual machines with older windows and office of course.
thanks!
Hi spywolf.
I use Windows 7 Ultimate 64-Bit edition.
At first I used Office 2007 Enterprise and the Outlok Plugin 2.40.02. The Outlook Plugin works fine with Outlook 2007.Now I use Office 2016 Professional Plus 64-Bit and I wanted to use the Outlook Plugin 3.04 which I have installed.
But this Plugin and the Version 2.40.02 will not show up in Outlook 2016.I have deinstalled and reinstalled the plugins more than once. Only the old, only the new and both together and nothing works.
At the moment I have installed only the Version 3.04.I can not use Office 2019 because this version will not run under Windows 7.
MfG
MDussthank you, it should work under Windows 7 as well.
I will create that test case and let you know what I find out. Thank you!
-
@MDuss Hello, can you please try latest internal build and let us know how it works for you:
https://powerarchiver.cachefly.net/2019/paop30008.exethank you!
-
@spwolf said in Power Archiver 20018 and Outlook 2016:
@MDuss Hello, can you please try latest internal build and let us know how it works for you:
https://powerarchiver.cachefly.net/2019/paop30008.exethank you!
Hi spywolf.
I installed the new Version but it will not show up in the Outlook Add-Ins.
I deinstalled the version 3.00.04 and installed the Version 3.00.08
Here is a screenshot from the Add-Ins Section from Outlook 2016 options and the installed plugin 3.00.08:
https://www.bilder-upload.eu/bild-33e9c2-1547452707.jpg.htmlIn the Add-In options I have one deaktivated Add-In which you can not see on the screenshot.
The Add-in is called “Windows Search Email Indexer”. This one is deaktivated.The Outlook Plugin seems to be installed because the Files are in the folder
C:\Program Files\PowerArchiver\PLUGINS\OfficeHere is a screen from the installed Plugin Files:
https://www.bilder-upload.eu/bild-ecffe7-1547452942.jpg.htmlFrom the post from BigMike it seems that only the registry entries are missing in my windows.
Would it be possible that you can send me the neccessary registry entries for the plugin as an export file .reg so that I can import than. Maybee it would work on this way.I have no idea why the setup will not create the registry entries when this is the error reason.
MfG
MDuss -
@MDuss Hello,
Here is updated installer that should fix this issue:
https://powerarchiver.cachefly.net/2019/paop30009.exePlease check it out and let us know.
Problem was that due to whatever changes in Office 2016 update, we were not able to properly detect the version used (x86 or x64) and installer installed x86 version even when Office x64.
It seems to have affected Win7 x64 and Office 2016 x64 builds only.
We have changed the installer to use different method of detection and now it should work fine.
thank you!
-
Hi Spywolf.
The New Version works for me not complete correct.
I can see the Plugin now in Oulook, but when I wanted to configurate it I have the same problme which i had with Version 3.00.04 and Outlook 2007, which I already described in this topic.https://forums.powerarchiver.com/topic/5814/powerarchiver-outlook-plug-in-don-t-works-correctly
When i used the Button "Add-In Options I get a fullscreen from the Power Archiver Plugin and I can make changes, but I can not close the Windows or so because the button for closing the window didn’t work. And the Checkboxes seems to be at the wrong places. Becaus when I wanted to check a box I need to click nearly 1 cm right of the checkbox to aktivate it.
And as I sayed, I can not close the screen anymore, so I need to close Outlok over the Task manager because I have no other chioce. Sometime I can use ALT + Space to bring up the Windows control to close the window.
Here is a Screenshot from my problem:
https://www.bilder-upload.eu/bild-5b3954-1547713173.jpg.htmlI can change the checkboxes when I click 1 cm right from the checkbox. And the pull-down menu are not usable for me because when I click on the small triangle the selctable options didn’t show up.
So this plugin Version I can not use completely because the pull-down didn’t work and when I make changes at the checkboxes they will work, wenn I can use alt + space so that I can bring up the close options from the window.
The configuration Window show Plugin Version 3.00.02 but I have installed Version 3.00.09
MfG
MDuss[Edit:] I have here found here a seconod error.
When I try to open the Add-In Option from an Add-In which didn’t have configurable options, then I normaly get an message about this case.
When I have installed the Power Archiver Plugin and I wanted to open the Add-In Option like above, than I didn’t get the message about not configurable options instead the window for the Power Archiver Plugin konfiguration opens although I didn’t want to open this because I had selected an other Add-In. -
Hi.
Sometimes I seems to be blind.
After I installed the plugin I have a new entry in the menu bar for powerarchiver.
When I go there I have a new button for the configuration.
When I use this button I have the normal configuration window which works normaly.
But when I go over the Outlook options and then go to the Add-Ins I have the problem I described in my last post with the not working window from the plugin configuration.MfG
MDuss -
@MDuss said in Power Archiver 20018 and Outlook 2016:
Hi.
Sometimes I seems to be blind.
After I installed the plugin I have a new entry in the menu bar for powerarchiver.
When I go there I have a new button for the configuration.
When I use this button I have the normal configuration window which works normaly.
But when I go over the Outlook options and then go to the Add-Ins I have the problem I described in my last post with the not working window from the plugin configuration.MfG
MDussthanks for letting us know… finally I was able to reproduce your issue as well. Thanks again!
-
Hi Spywolf.
When you are in the add-ins menu from the option and you want to open the configuration from an other addin like for example “Microsoft-Exchange-Add-In” do you get then the windows which tells you that this add-in have no configuration settings or do you get the window from powerarchiver although you have selected for example the “Microsoft-Exchange-Add-In” Add-in?
MfG
MDuss -
@MDuss said in Power Archiver 20018 and Outlook 2016:
Hi Spywolf.
When you are in the add-ins menu from the option and you want to open the configuration from an other addin like for example “Microsoft-Exchange-Add-In” do you get then the windows which tells you that this add-in have no configuration settings or do you get the window from powerarchiver although you have selected for example the “Microsoft-Exchange-Add-In” Add-in?
MfG
MDussIn the future update, we will remove separate add-in menu in options, so you will be able to configure it via toolbar only, as Microsoft wants. That way there is no confusion.
Let us know if you notice anything else, thank you!