-
W10 Pro 22H2 - 64 -bit
PA 22.00.06 (PA 2023)
It has been the case with previous versions of PowerArchiver, but I had hoped that the latest might behave differently. Not so, I’m afraid.
I have, for various obscure reasons, created a few .pa archives, mainly in the hope that they will save me some more space. From time to time, I use the “Test” option to check that important archives are OK and uncorrupted.
With every .pa archive I’ve tested, the process runs through OK but then reports that there are errors. This is always the number of files in the archive e.g. if 11 files, then 11 errors reported.
In the .pa, I can:-
preview the files (usually PDF) extract some or all files and look at or use them convert the .pa to a .zip or .zipx archive, which then works fine and tests without errorsIs it the case that the Test routine isn’t designed for .pa archives, or is there another reason? Although the .pa seems to function properly, despite the test reporting errors, I would like to be sure that every .pa is OK and not “broken”.
Some of the .pas are quite old and produced with earlier PA versions (they are truly “archives”). If I extract all the files in the old .pa, create a new, fresh .pa and add back the files to that, then test the new, no errors (at least in the .pa I’ve tried this on) are reported. This would suggest a mismatch between old .pas and newer versions of PA itself.
-
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
-
PA 21.00.18 running on Windows 7 64 bit.
I made a big .PA file and thought I’d check it was made correctly with Menu / Actions / Test.
Discovered:
a) PA always issues a UAC prompt to do this!
b) PA always says there are many errors in PA files. -
I installed powarc-macos20001.dmg and I am attempting to create a password protected zip file. When I create the zip in the UI it doesn’t write the file to the destination folder. No error message is displayed. The PA app has full folder permission. I’m new to Mac, but have been running PA on Windows for a long time.
Will there be a new version of the Mac version soon?
-
Hi! I came across an issue when I tried to uninstall PowerArch 2013. I got an error “The specified account already exists” which broke the process. I got the same error when I tried to install the current version, without uninstalling the previous one.
So I can’t uninstall and I can’t install PowerArchiver. Any suggestions? OS Windows 8.1 x64.Dariusz
-
Where are various settings store . . . e.g. ftp, etc.
-
d40b03ac-1a7a-4358-8d6c-0ec7f455de04-image.png
should the image have a white background?
-
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
Powerarchiver 2022
Right-click and select Encrypt on a folder does not work.
Although it says it encrypts, there is no encrypted file in the destination folder. -
The online update feature within the program suggests there is a later version than the ‘.17’ available on the web site. But clicking either download or update just reinstalls version .17.
Either there isn’t an update OR
the “download” and 'update" links should be repaired. -
Hi Dear,
Cannot login and request resend license code for my fd
-
Hi,
When you click on the Buy Now link, you come across four tabs - Home or Work, Enterprise Unlimited, Educational Discount, & Gift Discount.
What is the difference between a licence purchased via Gift Discount and a Home/Work licence?
Also, how can I renew the PowerArchiver Select plan a year after the purchase? Will it remind me automatically?
Best,
-
I’m running PA 21.00.17 64-bit on a 64-bit i7 desktop with W10 Pro, latest version. This 32gb of installed RAM.
As I use the PA pbs system for a number of scheduled archiving operations throughout the day, PA Starter is set to load and run at system startup.
In the course of trying to identify some causes of slowness and bottlenecks in other processes, I notice that PA Starter (PAS) always runs at between 11% and 15% of CPU (see screenshot), usually at about 12-13%. This is by far the highest demanding process on the system, as shown by Task Manager. In Performance Monitor, PAS Average CPU is 8.32, with every other process at less that 1 i.e. in decimal places only.
Task Manager also shows PAS Power Usage as “Very High”, and is the only process shown thus.
I have looked again at the information about PAS at https://wiki.powerarchiver.com/en:help:details:powerarchiver_starter, which was last modified in 2016. The article states a low memory usage for PAS of 784k, which is fair enough, but it is the large CPU overhead which is of concern.
It is of course possible to change the PAS priority, but this has no effect on CPU overhead.
However, is it possible to change PAS, which is required only at intervals to initiate PA scheduled tasks, from consuming so much system resource for every moment of the day?
PA Starter.jpg
SOLVED Virgin install
-
Hi,
After a long-ish battle with my win 7 install, which I had been using for many years, I am now on a virgin 8.1 install. It has been configured to be identical to win 7 as possible.
Two minor issues:- Installing new skins is impossible as PA is installed in the program files folder, so it is a permissions issue. I did fix this by brute force in my last install so would like advice on how to fix it here. Do I use the “take ownership” context menu?
The other thing is that PA still takes ages to load. What the heck is going on behind the scenes that it should take so long? Honestly, I did not see any difference thyat the startup optimisations made in the v17 line of PA
Cheers
DrT
-
@drteeth dont you have access to soon-to-be-beta PA 2018? Check out its speed vs PA 2017.
As to the skins, give us a link to example please (of a skin you are trying to install). It should be installed to app data.
-
I assume extra skins are meant to install to:
C:\ProgramData\ConeXware\PowerArchiver\Skins -
Thanks both for the info on where to put skins, I will check it out.
I do have access to PA 2018. I will download it and have a play. It wiuld have to have a considerable decrease in startup speed to be really noticeable. Also, the second and subsequent starups are not that much faster than the first one of the day.
Cheers
DrT
Update about beta. I downloaded 18.00.08 and it seemed to put a lot more in my install folder than just the powerarc.exe file. I did rename my original file before the install. Can I still revert by swapping these two files? VERY impressed about the speedup improvements.
-
@drteeth cant wait for you to try it :)
-
Hi all.
WOW! Now that IS a serious drop in loading speed.
Regarding the skins issue. I cannot get any skins from the PA site to load at all no matter where I place them on my hard disk. The skins I was experimenting with are Slate and SmoothVista.
Can I get updates via Patchbeam or must I download them directly from this site?
Cheers
DrT
-
@drteeth this week should be start of 2018 patchbeam updates, but not yet exactly. Things are still moving at fast pace.
Full skins are not supported anymore like that… new skins coming up soon. But Slate and Smoothvista interfaces used to work with directskin that stopped working properly with x64 version. However toolbar icons should still work (not tested in 2018 yet)
-
I had to stop testing as I found the unregistered version nag screen that appeared too annoying. If it can be removed, I will start again.
Due to the nature of the beta, I assume that I can have both PA 2017 and 2018 installed and usable at the same time? Is that correct?
I asked about downloading via patchbeam as I really do not like this forum software.
The good news is that I have retired by old Win 7 partition and am now on Win 8.1 x64, so the Virtual Drive feature is working again. YIPPEEEE!
Cheers
DrT
-
@drteeth there will be email with links… also you can configure forums in settings to load full page and set pagination manually, so it behaves like everything else… i have made it default now, but i cant change it for existing users… i assume thats the problem.
-
Hi,
Sorry, but what do you mean by “there will be email with links…”?
I also did not get any notification for your reply even though I am “watching” this thread. I’ll change a few settings.
Cheers
DrTeeth
-
@drteeth check chat icon on top right of the forums, i have sent it to you via chat.
-
Hi,
I have downloaded a later version.
My offline activation code is not working. I have been to my account page on the site and cannot see how to get another one.
Please advise.
Thanks
DrTeeth
-
@drteeth said in Virgin install:
Hi,
I have downloaded a later version.
My offline activation code is not working. I have been to my account page on the site and cannot see how to get another one.
Please advise.
Thanks
DrTeeth
online code works with every version since it checks and downloads appropriate offline code… and I have sent you manually offline code (in email) if for some reason you cant use it… latest release is a .16. Check it out and let us know how it works.
-
Hi,
I have not received an email from you at all.
I have been using the .16 release, but I need to get rid of that nag screen.
Cheers
DrTeeth
