Support for mobile devices and android?

[nikkho]

It was raised poor PA compression ratio:

• Uncompressed: 21,657,900,590 bytes
• 7-Zip (your package): 2,662,732,158 bytes
• PowerArchiver 17.00.90 (Optimize Strong): 3,398,179,937 bytes

Find package at: https://mega.nz/#!0aRDiAKQ!lrwtC64jnkk4d0ZKjcVGgLKPCcOqyUSyAQ62JJtQZOM[/QUOTE]

[spwolf]

@diskzip whats native compression, 7z?

Did not have a chance to try new version yet, i might this week.

As to the PA format, our current record with simple/optimized setting is:
PA 17.01.03: 2,460,182 kB (d2G, mt1)
7zip max settings: 2,593,514 kB
Your sample: 2,600,325 kB

We adjusted extension groupings, added more extensions to the exe/dll group that our exe filters are applied to and added unlimited size blocks to get better compression on samples over 10GB.

I think we can do at least 20-30M better with current settings, not everything is still perfectly grouped together for this sample.

So currently around 130M better than best 7z settings, 136M better than dzip.

[spwolf]

@nikkho what kind of files are they? Downloading, but it will take a while for me since I am on vacation, poor connection. Thanks.

Also, you can post a log of pa compression, lets see whats being applied.

[spwolf]

moved the thread of Advanced Codec Pack forums…

[diskzip]

I am the original uploader of this package, per this parent thread:

https://encode.ru/threads/130-PowerArchiver/page3

We also use a 7-Zip modification internally at DiskZIP, and are open minded about working with vendors who are able to improve the compression ratio.

DiskZIP also includes patent pending transparent disk compression which is a 100% DiskZIP exclusive.

I am looking forward to hearing from you on whether you are able to improve the compression ratio for my dataset. Thank you!

[spwolf]

@diskzip one rule here is no advertising of other software… as long as we can do that, no problem. You can also talk with eugene on compression related issue, and I am sure you know him from encode.ru.

I will check this specific data sample, as much as I know it is some game data?

[diskzip]

@spwolf Sure, no further ads :)

I am not familiar with eugene, at least not by that handle.

This is not game data but application data.

[spwolf]

@diskzip … shelwien on encode.ru.

Seems like some multimedia data that might like some multimedia filter applied… I will take a look sometimes next week to see where is the difference. Thanks.

[Brian Gregory]

For one thing it looks to me like .msi and .msp files probably aren’t being compressed as well as they should be.
EDIT: Though come to think of it 7zip won’t be doing anything better with them so I don’t know.

[eugene]

See diskzip’s previous post about this - https://encode.ru/threads/?p=53578&pp=1
PA can compress this set better, just not with default GUI settings or some such.
My current theory is that diskzip compares single-threaded vs MT results here,
where MT works by blockwise splitting of data.
Basically, its not enough to compare archive size here, paq8px would also compress better, so what.

[spwolf]

@eugene after a bit of testing, original .7zip uses big 1536M dictionary and mt1 setting, which is the reason for smaller file. By default, .pa uses 96M max I believe. Regular 7z Ultra setting creates 4.6GB file due to 64M dictionary.

I cant even test PA with same settings with my laptop since 1.5G dictionary at mt1 takes around 18GB of RAM.

There are a lot of similar and near identical files so huge dictionaries will always help, even if they are impractical for any kind of normal use.

[diskzip]

I can test locally here, but I am having a hard time configuring PA for testing at maximum compression settings. Where and how can I configure PA for the best available compression settings?

[diskzip]

@eugene said in Poor compression support:

See diskzip’s previous post about this - https://encode.ru/threads/?p=53578&pp=1
PA can compress this set better, just not with default GUI settings or some such.
My current theory is that diskzip compares single-threaded vs MT results here,
where MT works by blockwise splitting of data.
Basically, its not enough to compare archive size here, paq8px would also compress better, so what.

DiskZIP’s compression here uses two threads precisely.

[diskzip]

@spwolf said in Poor compression support:

@diskzip … shelwien on encode.ru.

Seems like some multimedia data that might like some multimedia filter applied… I will take a look sometimes next week to see where is the difference. Thanks.

Not really multimedia at all. Primarily application binaries and pre-compressed application runtimes.

[spwolf]

@diskzip a lot of repeat data that works well with 1.5GB dictionary… you can set plzma to 2000M in settings, and mt to 1, and lets see how it works.

I tested with 720m dictionary and that got it down another 400MB. But thats about the limit of my 12GB laptop.

When it comes to testing, having a test case that requires 18GB-25GB of free RAM is just too hard and obscure to test. It would be better to have some sample that can use proper multithreading and reasonable dictionary that users will actually end up using - for instance 128m and 8t.

When it comes to comparing lzma2 to our plzma with lzmarec entropy coder, you should see around 2%-4% improvement all other things being equal.

For us, while lzmarec is nice and can always show improvement over same settings for lzma2, it is not the main point of the PA format… more important are all these other codecs - mp3, lepton/jpeg, reflate for pdf/docx/deflate, bwt for text, mt ppmd for some multimedia files, deduplication filter for everything that works 50-60MBs, etc, etc… and how it all works automatically and multithreaded.

[diskzip]

@spwolf Is it necessary to restrict PA to only one thread? DiskZIP obtained this result on two threads, not one.

How about other filters - do I need to override any of those settings as well, especially in light of the large number of binaries included in my distribution?

[diskzip]

@spwolf said in Poor compression support:

@diskzip a lot of repeat data that works well with 1.5GB dictionary… you can set plzma to 2000M in settings, and mt to 1, and lets see how it works.

I tested with 720m dictionary and that got it down another 400MB. But thats about the limit of my 12GB laptop.

When it comes to testing, having a test case that requires 18GB-25GB of free RAM is just too hard and obscure to test. It would be better to have some sample that can use proper multithreading and reasonable dictionary that users will actually end up using - for instance 128m and 8t.

When it comes to comparing lzma2 to our plzma with lzmarec entropy coder, you should see around 2%-4% improvement all other things being equal.

For us, while lzmarec is nice and can always show improvement over same settings for lzma2, it is not the main point of the PA format… more important are all these other codecs - mp3, lepton/jpeg, reflate for pdf/docx/deflate, bwt for text, mt ppmd for some multimedia files, deduplication filter for everything that works 50-60MBs, etc, etc… and how it all works automatically and multithreaded.

So following the order of these instructions, the custom dictionary setting was lost. I had to repeat that step - glad I double-checked. Not the most intuitive UI, if you are open to a bit of negative feedback.

Another negative tidbit, it took about 1 minute for the operation to initiate (for the compressing files window to appear) after I clicked the Finish button.

Not the best user experience really, but I am excited to see what actual compression savings will result.

[spwolf]

@diskzip yeah, i noticed i posted wrong order but i figured you will figure it out… we have to reset the settings so users who enter wrong ones can go back to defaults, but otherwise users can easily save a profile with those settings and then always use that profile.

[spwolf]

@diskzip said in Poor compression support:

@spwolf Is it necessary to restrict PA to only one thread? DiskZIP obtained this result on two threads, not one.

How about other filters - do I need to override any of those settings as well, especially in light of the large number of binaries included in my distribution?

no, you dont need to do anything else… you are actually using 7z.exe and lzma2, right? lzma2 uses 2 threads per dictionary when it comes to memory - so in this case it is 11.5 x 1536M. Plzma is different not only due to different entropy coder, but also it is parallel version of lzma. So multiple threads are used for both compression and extraction. It also has larger maximum dictionary at 2000M.

Of course, even with mt1, there are multiple threads being used, depending on files, size, extension - for instance lzmarec entropy coder uses more than 1 thread anyway, and we also always use some extra filters.

In any case, what is maximum dictionary you use in your product? I am sure it is not 1.5G since thats 18GB of ram usage?

[diskzip]

@spwolf said in Poor compression support:

@diskzip said in Poor compression support:

@spwolf Is it necessary to restrict PA to only one thread? DiskZIP obtained this result on two threads, not one.

How about other filters - do I need to override any of those settings as well, especially in light of the large number of binaries included in my distribution?

no, you dont need to do anything else… you are actually using 7z.exe and lzma2, right? lzma2 uses 2 threads per dictionary when it comes to memory - so in this case it is 11.5 x 1536M. Plzma is different not only due to different entropy coder, but also it is parallel version of lzma. So multiple threads are used for both compression and extraction. It also has larger maximum dictionary at 2000M.

Of course, even with mt1, there are multiple threads being used, depending on files, size, extension - for instance lzmarec entropy coder uses more than 1 thread anyway, and we also always use some extra filters.

In any case, what is maximum dictionary you use in your product? I am sure it is not 1.5G since thats 18GB of ram usage?

DiskZIP doesn’t invoke 7z.exe, we have our own low-level wrapper around 7-Zip; unlike PowerArchiver though, we don’t actually implement our own custom algorithm(s) or change the default 7-Zip compression in any way (other than exposing 7-Zip functionality in a nice, structured API with callbacks, etc.) - we also license this 7-Zip library to third parties for their use.

The results with PA using your exact settings are 2.86 GB, I am at a loss to understand why PA has performed so poorly on this data set.

Our dictionary is indeed exactly 1.5 GB - this is the 7-Zip maximum for present time (and even already this presents some problems with extraction on 32 bit systems due to memory fragmentation). It is LZMA2, of course, and with 2 threads.

I may have misreported the memory requirements - but don’t blame me, blame the Windows Task Manager! I see it going up to 17.X GB (so cap it at 18 GB) with the 1.5 GB dictionary. With a 1 GB dictionary, it goes up to 10 GB (give or take a gigabyte).

[spwolf]

@diskzip interesting, i got 2.83G with 720m dictionary… It just has a lot of similar files so large dictionary with lzma does the wonders there. Doesnt seem like there is anything else to it.

Memory usage is 11.5x the dictionary size each 2 threads in mt setting for lzma2.

But how many of users have =>24GB required for such setting though?

[nikkho]

@nikkho said in Poor compression support:

PowerArchiver 17.00.90 (Optimize Strong): 3,398,179,937 bytes

I used 1GB dictionary on PA, and things went reduced to 2,79GB:

• PowerArchiver 17.00.91 (Optimize Strong 1GB): 3,004,242,466 bytes
• PowerArchiver 17.00.90 (Optimize Strong): 3,398,179,937 bytes

[spwolf]

@nikkho said in Poor compression support:

@nikkho said in Poor compression support:

PowerArchiver 17.00.90 (Optimize Strong): 3,398,179,937 bytes

I used 1GB dictionary on PA, and things went reduced to 2,79GB:

• PowerArchiver 17.00.91 (Optimize Strong 1GB): 3,004,242,466 bytes
• PowerArchiver 17.00.90 (Optimize Strong): 3,398,179,937 bytes

I tried both 7zip - Ultra and PA Strong at 128m, and 7z was 4.59GB while PA was 3.17GB.

This large difference is likely due to rep working on similar files. But rep has a limit of 2GB, so it likely misses a lot when it comes to 20GB samples. But sure is nice to work at mt8 and have it done in 3x less time :)

[diskzip]

Well our target goal here is at least 2.48 GB, which is what DiskZIP is able to achieve with an out-of-the-box 7-Zip compression engine under the hood.

I was hoping for PA to reduce that further to the neighborhood of 2 GB even, or at least a symbolic reduction over the “raw” upload size.

It is great to see my own product outperforming all else, but in the interest of advancing the state-of-the-art in compression, I would hope for more third party competition :)

[eugene]

It should be possible to reach a better result with PA.

1. plzma should support a larger window than 1536M
2. a1/lzmarec mode might provide a few % better compression than a0/lzma
3. rep1 dedup filter has parameters that can be tweaked too.
   Or it might be better to disable it instead, when p/lzma with huge window is used.
4. reflate might work on some files.
5. x64flt3 exe filter should be better than bcj2
6. deltb filter should have some effect on exes too
7. we can tweak file ordering
   Atm we don’t have a PC with >20GB of memory around, so we can’t do these experiments.
   And anyway, I’d not expect that much gain here, because we don’t have LZX recompression atm,
   which is what is necessary for many of these cab/msi files.
   As to .7z files, I guess I can integrate my existing lzma recompressor easily enough, but it won’t have that much effect.

[diskzip]

@eugene said in Poor compression support:

It should be possible to reach a better result with PA.

1. plzma should support a larger window than 1536M
2. a1/lzmarec mode might provide a few % better compression than a0/lzma
3. rep1 dedup filter has parameters that can be tweaked too.
   Or it might be better to disable it instead, when p/lzma with huge window is used.
4. reflate might work on some files.
5. x64flt3 exe filter should be better than bcj2
6. deltb filter should have some effect on exes too
7. we can tweak file ordering
   Atm we don’t have a PC with >20GB of memory around, so we can’t do these experiments.
   And anyway, I’d not expect that much gain here, because we don’t have LZX recompression atm,
   which is what is necessary for many of these cab/msi files.
   As to .7z files, I guess I can integrate my existing lzma recompressor easily enough, but it won’t have that much effect.

Interesting thoughts. I myself have lost the 32 GB RAM machine access for the next 10 days or so, but I will be glad to retest as soon as I have that access. In the meanwhile, I have a 16 GB RAM machine which I will try to retest on.

Some thoughts:

1. I tried with 2 GB per the instructions.
2. How to configure these?
3. I was counting on dedup for huge savings. Would it conflict with LZMA or would it be best to enable it?
4. I don’t think there’s many ZIP streams in the dataset.
5. That sounds very exciting. Is it a custom PA filter? Is it for 64-bit binaries only, or does it also cover 32-bit binaries?
6. Same as #5.
7. This must be tweaked, even DiskZIP cannot compress well unless the file ordering is sorted instead of “random”.

For LZX recompression, you probably won’t be hampered by digital signatures (for when you end up having it), right?

On that note - some of the LZX’s may have Microsoft’s delta repacks, which may be more problematic than just ordinary LZX decompression.

The one good news for the .7z files is that they are all stored uncompressed/raw - so the only benefit lost is proper file sorting across the bigger data set.

[spwolf]

@diskzip do you plan to add full MT support for 7z? I think that is a must have if you want people to use your tool over 7z. Otherwise, it is much easier to test 7z with just using 7zFM since we can use 8t cpus properly and it cuts down testing on 20gb files by significant margin (35m vs 140m for this test on my computer).

Or does DiskZip do anything else for 7zip that affects compression, are results different between 7z and diskzip using 7z?

[eugene]

In the meanwhile, I have a 16 GB RAM machine which I will try to retest on.

You should be able to use 1G dictionary there, at least.

I tried with 2 GB per the instructions.

2GB is wrong, I suggested 2000M; 2GB is 2048M.
Problem is, bt4 matchfinder uses 32-bit indexes and there’s a dual buffer for window
(to avoid special handling for wrap-around).
Then, there’re also some special margins, so using precisely 2^32/2 for window size
is also impossible.
I’m not sure about the precise maximum for window size, so you can start with 1536M
and try increasing it, I guess.

How to configure these?

Try looking around in all options windows/tabs?
Otherwise, just try testing with 7zdll/7zcmd, you should have the links?

I was counting on dedup for huge savings.
Would it conflict with LZMA or would it be best to enable it?

Current dedup filter (rep1) only supports up to 2000M window too,
due to the same issues as lzma, so it would only hurt lzma compression,
when it has the same window.

Compression-wise, srep should be better atm, but its also slower
and relies on temp files too much.
And in any case, you should understand that we can’t just use Bulat’s
tools in a commerical app.

In fact, dedup filter improvement is planned, I’m just busy
with other codecs atm.

I don’t think there’s many ZIP streams in the dataset.

There’re plenty of cab archives with MSZip compression though.
Like all .msu files, for example.

5. That sounds very exciting. Is it a custom PA filter?
   Is it for 64-bit binaries only, or does it also cover 32-bit binaries?

It does more or less the same as bcj2 for 32-bit binaries (hopefully better),
and it also adds support for RIP addressing in x64 binaries.

6. Same as #5.

Yes. Normal delta filter in 7z simply subtracts all bytes with a given step.
(For example, it would be delta:4 for 16-bit stereo wavs.)

While deltb is an adaptive delta filter, which tries to detect binary tables
in the data. Its not very good for multimedia, but can be quite helpful for exes.

For LZX recompression, you probably won’t be hampered by digital signatures
(for when you end up having it), right?

All our recompression is lossless, so hashes/crcs/signatures should still match
on decoding, because extracted archive should be exactly the same.

There’s a bigger problem with LZX though - it supports window size up to 2M,
and does optimal parsing, so a reflate equivalent for LZX might appear too slow,
or would generate too much recovery data (if optimal parsing is not reproduced in recompressor).

But at least for LZX it might still be possible, while for LZMA it likely isn’t.

On that note - some of the LZX’s may have Microsoft’s delta repacks, which
may be more problematic than just ordinary LZX decompression.

Yes, there’s also LZMS, which is a newer LZX upgrade with support for >2M windows,
x64 code preprocessing, etc.
And then, MS also uses quite a few other compression algorithms (xpress,quantum,LZSS,…).
But its a lot of work to write a recompressor even for a single format,
so we don’t have any plans for these atm.

Its much more interesting to look into direct applications of what we already have first,
like reflate-based recompression for png/zip/pdf, adding level/winsize detector to reflate, etc.

The one good news for the .7z files is that they are all stored
uncompressed/raw - so the only benefit lost is proper file sorting across
the bigger data set.

Yes, it could be a good idea to write recompressors for popular archive formats,
even without support for their codecs - just turn archive into a folder
and extract whatever data in archive corresponding to files with names from archive.

[diskzip]

@spwolf said in Poor compression support:

@diskzip do you plan to add full MT support for 7z? I think that is a must have if you want people to use your tool over 7z. Otherwise, it is much easier to test 7z with just using 7zFM since we can use 8t cpus properly and it cuts down testing on 20gb files by significant margin (35m vs 140m for this test on my computer).

Or does DiskZip do anything else for 7zip that affects compression, are results different between 7z and diskzip using 7z?

DiskZIP is fully multi-threaded, but the default compression profiles all favor smaller archive size over processing speed, so you would need to edit your compression settings in the DiskZIP GUI to spread usage over more cores. I am escalating this request internally to see where the magic happens here.

Note that with standard 7-Zip (or DiskZIP that consumes standard 7-Zip from a structured DLL interface), you need to limit thread counts to two for obtaining the best results. While LZMA2 has been optimized to spread the workload across multiple threads, doing so always does very substantial harm to the compression savings realized.

DiskZIP does not do anything that affects compression, so results should be 100% identical between 7-Zip and DiskZIP.

[spwolf]

@diskzip said in Poor compression support:

@spwolf said in Poor compression support:

@diskzip do you plan to add full MT support for 7z? I think that is a must have if you want people to use your tool over 7z. Otherwise, it is much easier to test 7z with just using 7zFM since we can use 8t cpus properly and it cuts down testing on 20gb files by significant margin (35m vs 140m for this test on my computer).

Or does DiskZip do anything else for 7zip that affects compression, are results different between 7z and diskzip using 7z?

DiskZIP is fully multi-threaded, but the default compression profiles all favor smaller archive size over processing speed, so you would need to edit your compression settings in the DiskZIP GUI to spread usage over more cores. I am escalating this request internally to see where the magic happens here.

Note that with standard 7-Zip (or DiskZIP that consumes standard 7-Zip from a structured DLL interface), you need to limit thread counts to two for obtaining the best results. While LZMA2 has been optimized to spread the workload across multiple threads, doing so always does very substantial harm to the compression savings realized.

DiskZIP does not do anything that affects compression, so results should be 100% identical between 7-Zip and DiskZIP.

i could not find anything, even for smaller sets and less memory needed, it only uses around 20% of my cpu (8t cpu), while with same files and settings 7z would use up to 100%.

With only dictionary changed to d128M, i get 60MB smaller file by using 7zip vs using DiskZip. Something you can try on your end as well, maybe some other setting to be changed?

At that point, PA is smaller by 960M… with big lzma dictionary, it is basically used as dedup. I tested d768m with 7z and difference went down to 30-40M.

It will be interesting to see more results on my test computers once I am back from vacation, in some 15 days. I will be able to get it to work with various settings at that point while right now I can only use laptop and it takes more than 2hrs.

[diskzip]

@spwolf said in Poor compression support:

end

OK, DiskZIP uses all available CPU cores with a 16 MB dictionary or smaller, and a maximum of 3 CPU cores with a 32 MB dictionary. A 64 MB dictionary or larger results in a core limit of 2.

Apparently these numbers are heuristic limits from a long time ago. Do you think we should move up the dictionary limits somewhat?

[winstongel]

@spwolf said in Poor compression support:

Memory usage is 11.5x the dictionary size each 2 threads in mt setting for lzma2.

LZMA decoder is simple. But PPMd decoder is complex. LZMA2 is better than LZMA. LZMA2 compression does not replace (supersede) LZMA compression, but LZMA2 is merely an additional “wrapper” around LZMA. With LZMA2, data is split into blocks, but each block is still compressed by “normal” LZMA. Because individula blocks are compressed separately, processing the blocks can be parallelized, which allows for multi-threading. LZMA2 also allows “uncompressed” blocks, to better deal with “already compressed” inputs.

[diskzip]

@winstongel said in Poor compression support:

@spwolf said in Poor compression support:

Memory usage is 11.5x the dictionary size each 2 threads in mt setting for lzma2.

LZMA decoder is simple. But PPMd decoder is complex. LZMA2 is better than LZMA. LZMA2 compression does not replace (supersede) LZMA compression, but LZMA2 is merely an additional “wrapper” around LZMA. With LZMA2, data is split into blocks, but each block is still compressed by “normal” LZMA. Because individula blocks are compressed separately, processing the blocks can be parallelized, which allows for multi-threading. LZMA2 also allows “uncompressed” blocks, to better deal with “already compressed” inputs.

That’s a dramatic oversimplification. LZMA2 very substantially hurts compression ratios when greater than two threads are used (which is why DiskZIP limits to two threads in virtually all compression scenarios with a non-minuscule [at least, by today’s standards] dictionary size).

[diskzip]

@diskzip said in Poor compression support:

@spwolf said in Poor compression support:

end

OK, DiskZIP uses all available CPU cores with a 16 MB dictionary or smaller, and a maximum of 3 CPU cores with a 32 MB dictionary. A 64 MB dictionary or larger results in a core limit of 2.

Apparently these numbers are heuristic limits from a long time ago. Do you think we should move up the dictionary limits somewhat?

We’re pushing out an update soon, which adds a new “All” parameter to the multi-threading/hyper-threading setting.

This new “All” parameter will be the default in the regular and high compression profiles. Only the extreme compression profiles will stick to the previous “Yes” setting.

When “All” is selected here, all cores will be used. When “Yes” is selected here, the previous heuristics will apply (2 cores in most scenarios as above).

[nikkho]

@diskzip said in Poor compression support:

@diskzip said in Poor compression support:

@spwolf said in Poor compression support:

end

OK, DiskZIP uses all available CPU cores with a 16 MB dictionary or smaller, and a maximum of 3 CPU cores with a 32 MB dictionary. A 64 MB dictionary or larger results in a core limit of 2.

Apparently these numbers are heuristic limits from a long time ago. Do you think we should move up the dictionary limits somewhat?

We’re pushing out an update soon, which adds a new “All” parameter to the multi-threading/hyper-threading setting.

This new “All” parameter will be the default in the regular and high compression profiles. Only the extreme compression profiles will stick to the previous “Yes” setting.

When “All” is selected here, all cores will be used. When “Yes” is selected here, the previous heuristics will apply (2 cores in most scenarios as above).

It is a very nice feature. But I am not sure if All should be equivalent to all cores, or to all threads in case of Hyper-Threading and similar.

[diskzip]

@nikkho Oh, of course All is equal to all available logical cores - including hyperthreaded cores and physical cores.

[spwolf]

@diskzip cool… now, did you try creating that archive with diskzip vs 7z.exe? Now that vacations are over, we got some new computers with 32g and 64g for ram, so we can test this particular case properly. I tested this 2 weeks ago but we are working on some new codecs so forgot to post results.

Turns out the main reason is likely that 7z.exe does better filter selection than PA in this particular case. And also, when you use 7z.dll like Diskzip does (and PA), you dont get file detection that 7z.exe has. Diskzip just forces bcj2 on everything, while we try to detect and apply appropriate filters based on extension but we either miss some extension or itanium filter that 7z.exe uses is the reason for this.

So my best case result was:
2.47G for 7z.exe
2.52G for PA

• DiskZip and PowerArchiver .7z files were around 100M worse than .PA format.

Now lets try some multimedia files (wav files from 10GB Matt Mahoney test sample)

• PA 277M
• 7z 282M
• DiskZip 322M

Same dictionary setting (1536M). 7z and PA use same delta filters, difference is just lzmarec entropy coder in PA vs lzma. We do not have special WAV codec yet so basically everything is very similar to 7z when it comes to WAV files.

On the other hand, DiskZip does not use multimedia filters at all and also applies BCJ2 on everything (this might have adverse effect on speed and size). So next job would be to detect multimedia files better and apply delta filter on those. Try wav, bmp (and other similar non compressed multimedia files).

[diskzip]

@spwolf Incorrect - DiskZIP does offer the same level of file detection that 7z.exe has.

You do have to manually select a custom compression string though:

This is because the default profiles do indeed indiscriminately apply the BCJ2 filter as you have already noticed.

With the custom compression strings, DiskZIP would be about 100 MB better than PA.

Note that I have never even been able to come close to your reported results with PA at all - something you’ll probably be able to fix in future releases.

DiskZIP’s results with multimedia would also improve on par with 7-Zip with the custom compression string, which enables the same auto-switching filter capability found in 7z.exe.

Have you also had a chance to run DiskZIP’s ZIPX compressor on multimedia files? That might outperform both 7-Zip and PA.

Please try it out and let me know what you find!

Does PA include JPEG compression at all? This is again provided by the ZIPX Plug-In in DiskZIP.

[spwolf]

@diskzip using forced settings on 7z.dll doesnt work well, it will apply them to all files and worsen compression for everything. Unless you select settings for each file separately. So it is not a solution except for hand picked sample.

So what setting did you use on archive you sent, I am pretty sure it was created by 7z.exe and not diskzip? You can see it by type of filters used.

As to the zipx, it has significantly worse compression for anything (not to mention mt1 or mt2 in mI ost cases) but jpeg and wav, so so again users would have to compress files separately and hand pick which go into zipx and which goes into 7z.

With Pa, we added extension sort in latest version and you can use 2g window, so result is 2645, it is easily repeatable…

We filter all these files automatically and apply over 15 different codecs and filters, so generally it will produce better results in most real life cases than using different format for each file. Realistically you cant compare that to using 7z dll with bcj2 on all files. For people using 7z format, best bet is to use 7z.exe and not 3Rd party tools due yo the file detection that 7z.exe uses, your result will never be as good.

[diskzip]

@spwolf said in Poor compression support:

@diskzip using forced settings on 7z.dll doesnt work well, it will apply them to all files and worsen compression for everything. Unless you select settings for each file separately. So it is not a solution except for hand picked sample.

So what setting did you use on archive you sent, I am pretty sure it was created by 7z.exe and not diskzip? You can see it by type of filters used.

As to the zipx, it has significantly worse compression for anything (not to mention mt1 or mt2 in mI ost cases) but jpeg and wav, so so again users would have to compress files separately and hand pick which go into zipx and which goes into 7z.

With Pa, we added extension sort in latest version and you can use 2g window, so result is 2645, it is easily repeatable…

We filter all these files automatically and apply over 15 different codecs and filters, so generally it will produce better results in most real life cases than using different format for each file. Realistically you cant compare that to using 7z dll with bcj2 on all files. For people using 7z format, best bet is to use 7z.exe and not 3Rd party tools due yo the file detection that 7z.exe uses, your result will never be as good.

No.

First, as I’ve mentioned before, DiskZIP is not based on 7z.exe or 7z.dll. We have our own proprietary wrapper around the 7-Zip code, probably similar to how PA does it - with the major difference that we do not actually change any compression code. The advantage of this approach is that we do enjoy all features that are inside 7-Zip as a “first class citizen” of the 7-Zip stack.

This includes, again as I have mentioned before, proper file sorting, automatic filter application, among others.

This is probably why you’re adamant the file I sent you must have been created using 7z.exe (or 7z.dll) instead of DiskZIP. If you still have any doubts, please pick the first command line override parameter (which configures for the highest compression) and reproduce the results for yourself. This will of course require a whole lot of memory, which is why we don’t include this setting by default in any of our out-of-the-box compression profiles.

As for your specific points:

Extension sort in DiskZIP is standard in all compression profiles, but can be turned off if the user so desires (just set File Sorting to false). This was actually a surprising regression in 7-Zip compression performance between the latest branches 16.x-17.x and the earlier 9.2x branches. Fortunately, we never passed this regression on to our customers.

Correct filter application is, again, automatic with the overridden command line - of course, if you use the GUI settings, the default profiles do lock you in to BCJ2, but you can change them to whatever you want (and it would be hardly unexpected to get the filter you configured at that point).

It would still have been nice had you been able to test our ZIPX format. Maybe the results would have surprised you?

Last but not least, the reason we did choose the BCJ2 filters as default in our profiles was because they performed best in our tests for all samples we came across, not just cherry-picked test cases. Of course, it is understandable that our median test cases and your median test cases would differ.

I hope that helps clear some of the confusion. At the end of the day, is PA still unable to meet or exceed DiskZIP’s compression on our sample data set (which is, again, a typical load for our environment, and not a hand-picked specially crafted set designed just to defeat PA - that would be quite hard to manually build, I’m sure!)

[spwolf]

@diskzip again, your file that you provided seems to be created with 7z.exe. File created by DiskZip does not have these filters used and has 150 MB larger size. There is no special switch in 7zip to make it use itanium filter for instance, it is part of bcj2 and used when 7z.exe detects appropriate executable. When you use 7z.exe to create your folder, it will automatically apply itanium filter when it detects such executable.

Same goes for the use of multimedia delta filter. Diskzip does not use delta filters at all as it needs 7z.exe to determine what file to use it on. As such, DiskZip will always create different/worse results compared to 7zip.

Please let me know what switch to use in order to replicate file you have sent as example of DiskZip compression.

As to “your” zipx compression, it is actually WinZip Zipx compression. You are aware that zipx is not solid compression and that it creates significantly larger files than 7z? When it comes to special codecs - PA format has better codecs for text, jpeg, mp3 compared to WinZip zipx (specifically whats unique compared to WinRar and 7zip) together with everything else that makes PA format unique. It is considerably faster while having considerably better compression at the same time.

So yeah, we try WinZips zipx every time we add new codec to PA format and benchmark it against it, as well as 7zip, WinRAR, FreeArc as well as speciality compressors like precomp. Obviously we try to do something better, even if we do not succeed each time.

And since you obviously consider diskzip to be on par with other compression applications, why not submit it for testing at:
http://www.squeezechart.com/

That way you will have independent tests to back up those claims of first class citizen. Problem is that in tests that I do with DiskZip, it creates larger files than 7zip but I would love to be proven wrong. I am sure @Stephan will be helpful as usual.

[diskzip]

Thank you for sticking around, we’ll get to them bottom of this.

Please see the step-by-step instructions I’ve posted here for configuring the compression string manually:

https://encode.ru/threads/130-PowerArchiver?p=53664&viewfull=1#post53664

It is easier to attach images to a post there, so please excuse me for having to redirect you there for instructions. There are precise instructions there though, so your detour is worth it.

For ZIPX, we use the BricolSoft Zip ActiveX control - this excellent library may be worth for you folks to check out as well. After all, nobody on this thread invented 7-Zip, and nobody here invented ZIPX either!

[spwolf]

@diskzip said in Poor compression support:

https://encode.ru/threads/130-PowerArchiver?p=53664&viewfull=1#post53664

cool, will test it out with that setting sometimes soon.

[diskzip]

We have just released DiskZIP 2018, with the following enhancements:

https://encode.ru/threads/2763-DiskZIP

Thank you very much for the feedback you provided on this thread regarding the usage of CPU cores. This issue is now addressed by way of utilizing all available CPU cores (with the exception of the highest compression profiles, which limit to two CPU cores in order to ensure the best compression ratios).

Please also note, you would now need to choose the second command line override string instead of the first, because in DiskZIP 2018, the first command line override string again forces BCJ2 compression :)

I know, ironic! The customer is always right, and that’s what they wanted…

So please excuse the inconvenience caused by the inaccurate instructions - as you will see for yourself when you take a look at the custom compression strings though, the second one does engage 7-Zip’s automatic file detection filters.

I would like to thank you all once again, on behalf of the entire DiskZIP team, for your feedback - and we look forward to any further feedback you may have on the 2018 release. Wishing you all a great weekend!

[spwolf]

@diskzip now we get PR releases on our forums, do you have a link to it so i can delete the huge post relevant mostly to your product?

[diskzip]

@spwolf You are right, please excuse my enthusiasm. I have made the edit directly, please don’t hesitate to let me know if it is not satisfactory.

[diskzip]

@spwolf Have you had a chance to test our native compression yet? Please note, as I described in my new release announcement post, to use an auto-switching filter, you now how to use the second command line override parameter (instead of the first as it was in the prior version). Thanks!

[spwolf]

@diskzip whats native compression, 7z?

Did not have a chance to try new version yet, i might this week.

As to the PA format, our current record with simple/optimized setting is:
PA 17.01.03: 2,460,182 kB (d2G, mt1)
7zip max settings: 2,593,514 kB
Your sample: 2,600,325 kB

We adjusted extension groupings, added more extensions to the exe/dll group that our exe filters are applied to and added unlimited size blocks to get better compression on samples over 10GB.

I think we can do at least 20-30M better with current settings, not everything is still perfectly grouped together for this sample.

So currently around 130M better than best 7z settings, 136M better than dzip.

[diskzip]

@spwolf said in Poor compression support:

@diskzip whats native compression, 7z?

Did not have a chance to try new version yet, i might this week.

As to the PA format, our current record with simple/optimized setting is:
PA 17.01.03: 2,460,182 kB (d2G, mt1)
7zip max settings: 2,593,514 kB
Your sample: 2,600,325 kB

We adjusted extension groupings, added more extensions to the exe/dll group that our exe filters are applied to and added unlimited size blocks to get better compression on samples over 10GB.

I think we can do at least 20-30M better with current settings, not everything is still perfectly grouped together for this sample.

So currently around 130M better than best 7z settings, 136M better than dzip.

By native compression, I was asking whether you were able to reproduce our results on our testing data set using DiskZIP and the updated compression string for the 7ZIP file type, natively inside DiskZIP, without using 7z.exe or 7z.dll or any other external process.

So can you share a compression string - or other instructions to configure PA - so that I may be able to reproduce your results internally?

Also, glad to see you were able to push 7-Zip 6 MB more than the built-in DiskZIP. What compression string did you use to achieve this - or what version of 7-Zip?

We should be able to replicate the exact same result in DiskZIP, of course; its just a matter of discovering the compression string.

Thanks again, and congratulations!

[spwolf]

@diskzip yes, i was… when it comes to 7z, I just maximized settings in 7z gui and added same switches you use for sorting, and that gave me 6-7 MB smaller file. Try it out and see what are the differences between your internal switches.

There is no overly complicated string or anything like that in PA, just select 2000 for dictionary and mt1, extreme setting of course. Same as before.

Update should be out today or tomorrow, depending on QA team testing, there quite a number of things changed for other parts of PA. Update from last month already got the same settings down to 2.599… There is no change in codecs.

We should get few mb more at least in the end. It was useful for us as a testing in the end, to add more exe/dlls formats on the list, as well as sorting/big block switch for files over 10G total.

[diskzip]

Of course. Glad I could help :)

[nikkho]

New record with Razor: 2,413,444 kB
https://encode.ru/threads/130-PowerArchiver?p=54599&viewfull=1#post54599

[diskzip]

@nikkho said in Poor compression of >20GB exe/msi/cab sample:

New record with Razor: 2,413,444 kB
https://encode.ru/threads/130-PowerArchiver?p=54599&viewfull=1#post54599

Yes, while we have been bickering here about DLLs and EXEs vs native implementations; someone has actually improved something :)