-
PA Queue does not compress file optimally with same parameters if used in Queue mode.
Being able to save advanced option, and set a default profile and archive type for compression so I can save clicks.
The above two are majorly affecting my efficiency with archiving stuff with PA 20.10.03.
Can someone confirm if they are resolved with the 2022 RC1?
-
Hi,
I thought, I’ll give it a try and upgrade my PA 2018 Toolbox on my production machine to PA 2021 (20.10.03)
Sending registration codes in your order recovery doesn’t seem to work at the moment (I also checked my junk folder), online activation works Using registry to disable modules (for example HKLM\SOFTWARE\PowerArchiverInt\General\DisableBurning) doesn’t work as expected with modern ui. The module is visible, but I’ll get the trial nag, if I try to open it. It’s almost fine in classic and ribbon mode.7989017c-3cd2-4a99-a1f6-06ce62329dec-image.png
“DisableClouds” and “DisableExplorer” seem not to be respected at all, while the classic UI seems to respect the setting to disable any other unused module:
In settings I won’t be able to access the SmartAI settings and the settings for the internal editor if the FTP module is disabled
89843f23-ad89-45bf-92bc-406b1a11dfc9-image.pngcc40877b-d8d0-404c-b7f8-d5ae0a1ee445-image.png
-
I’m running W10 Pro on an HP i-7 machine with now 32gb of RAM. The system drive is an SSD.
In the course of sorting out some inconsistencies in a couple of my .pbs jobs, I’ve been paying close attention to the system CPU resource and power consumption of PA Starter, as shown by the various resource management tools. I’ve also been trying to identify why my system seems rather sluggish despite some extensive tuning for speed etc.
When I have enabled Starter as a start-up programme, to use the PA Queue facility, I see that Starter consistently uses between 10-13% of CPU, with High Power consumption indicated. It runs, consuming this resource, irrespective of what may be happening with PA and any pbs script jobs.
I can understand a need to use a good chunk of CPU when Starter is actually handling PA jobs, but it shouldn’t sit and consume this amount when it really isn’t doing anything but wait for a job to start and for which it is needed.
Perhaps I’ve missed a way of lessening Starter’s impact, but in the meantime I’ve adjusted my set-up to running PA without it.
Suggestions, please.
-
Bug: When I use the right button on any folder to bring up the menu and click on e.g. compress or decompress, the program still requires registration even if it is correctly registered. When working with the folder, via the running Power Archiver, everything is fine. (Windows 10 - v. 20.10.03)
-
Dear @Alpha-Testers and all of our users,
time has come for testing of PowerArchiver and PACL for macOS.
Please let us know here if you have Mac and can test latest builds.Features implemented:
PowerArchiver 2020 - tabbing, opening, extracting, adding, testing, favorite folders, support for multiple languages, opening via Finder, explorer mode, installer.
PACL 10 - support for most formats and features in Windows version.Upcoming: Tools such as archive converter, batch zip, multi-extract.
To start testing, please sign up here in this thread, and we will send you latest build.
thank you!
Ashampoo_Snap_Wednesday, November 20, 2019_12h54m56s_008_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m05s_009_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m14s_010_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m30s_011_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m39s_012_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m49s_013_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h56m00s_014_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h54m43s_007_.png
76e97ab9-8d75-4175-9ce8-446500031f38-image.png
-
Hi,
The window size is suddenly “large” Resizing the window to normal size works for the current action, but isn’t remembered The next time I’m using the shell extension, the window is large again, so it seems the size change isn’t saved
I’ve got a strange behavior with the progress window in PowerArchiver 2021 shell extension:The progress window of PowerArchiver itself has its normal size.
Is there a possibility to reset the shell extension window size?
-
There would be many of us with Intel Processors.
and they have their own optimized zlib algorithm, which can result in more efficiency if used combined with their hardware processor.
Reference:
https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/zlib-compression-whitepaper-copy.pdfCan we get the same Functionality Under Hardware Acceleration Feature?
Zlib is not the only feature that intel has included with their processor, there’s many, which if combined can result in efficient and better compression ratios.
-
Windows 10 extraction does a better extraction job than Power Archiver which chooses not to work much of the time. I’ve tried uninstalling/reinstalling it
Version 20.10.03
-
The support doesn’t answer my email about a license question for weeks, because despite a lifetime license Powerarchiver refuses some functions
-
Scusate non so a chi rivolgermi, ho regolarmente pagato tramite Poy Pol ma non mi è pervenuto il codice di attivazione, ho quello vecchio ma presumo che non sia più valido, a chi devo rivolgermi?
Spero che mi possiate aiutare indicandomi cosa devo fare.
Grazie -
I have a “USB2.0” DVD-RW drive with a blank 700MB CD-R inserted.
Windows 10 sees in just fine explorer and it’s usable, and works.
However it is not showing in any dropdown in PowerArchiver.Thanks for any help…
PowerArchiver 20.10.02 (05/2021) 64-bit
Windows 10 Pro
20H2 build: 19042.1348
Windows Feature Experience Pack 120.2212.3920.0 -
I’m using 20.10.02. When I try to drag files from an opened zip to a folder in Windows File Explorer, PA does nothing. It uses a CPU core and starts the clock, but no action is taken. I have to end task in task manager to get it to close.
-
6e4196e6-d59c-4870-b27e-80c5ae60e4d7-image.png
see image. the bottom of yes and no are cut off
-
Will PA 2022 still support windows 10 as majority of people can’t upgrade and won’t till 2025
-
Hello,
PowerArchiver Command Line 7 support file greater than 2 Go ?
Thanks
-
I’ve found a bug when trying to test an encrypted, 28-volume 7-zip archive of a 18.3 GB folder containing 41,751 files. The test fails, showing errors in all files.
Here’s the folder I compressed, and the 28 resulting files:Archives
Here’s the multi-volume compressed file opened in PA, showing the total file count and the full archive size:Opened in PowerArchiver
And here’s the test results screen after I click Actions -> Test…, showing an incorrect file count and archive size (this seems to be the file size of the first volume alone):Testing results
One important detail about the test screen above is that PA opens an UAC prompt asking for privileged execution before starting the test. Is this the expected behavior? It seems PA wouldn’t need higher execution privilege since everything it’s touching is owned by my own user.
In any case, granting or denying the UAC prompt results in the exact same screen.
Now, if instead of testing the archive I tell PA to extract the contents, the operation works fine (and with no UAC prompts):Extracting
With the Properties panel for both folders, the original and the extracted one, showing the exact same file count and total size:Extract results
I hope this helps. 🙂
-
Hi,
Currently on the 2021 20.00.55, updated, and licensed.
I have been facing this issue since 2019 version.
Queues don’t actually do anything
That I run powerarchiver starter as admin, or without admin.Then I queue some files, and most of the files take forever, to go from 1% to 2%
and let’s say if the 5th of total 10 files are stuck that should mean the other 4 should be completed, but no, the directories are just like that.
Using Queue feature makes the Powerarchiver to process and compress files, but the PA archives do no appear, neither the disk’s total used space changes.
However if I manually compress files without queuing, no matter if I run multiple compression or one by one, there’s always success.
sometimes compression is stuck at certain percentage for a 50 or 200 MB file, forever.
I want to speed up multiple compression, I find the batch compression feature useless, as I cannot configure any custom parameters or advanced option under PA archive format
So, Let me save parameters(Advanced Option) of Profiles
i) Either I should be able to customize PA Default profile, so I don’t have to select files and manually select profile, but not even single parameter can be saved
ii) Or I should be able to create a new profile and be able to set that as default.
It’s end of 2020 and I have been trying to reach Powerarchiver team to add this, but no one wants to listen or do anything.Refer case PA-FCW-TLNFM-096
I still cannot save parameters under advanced options like DDL/EXE filter to delta, or PNG PDF Filter, or set zlib to 9 or dictionary size or experimental stuff.
Soo many Revisions and versions released but I still cannot have a profile saved with whatever I want, be it existing or new profile.
Don’t you guys at Powerarchiver labs get frustrated everytime you have to configure these parameters manually?
When I stop an ongoing compression process, that is stuck or let’s say it’s not stuck but I click on cancel and then on No, it still continues compression for no reason.
If I start compression and pause, the progress bar shortly(progresses) reaches to completion, but no compression is done, and then archive is stuck forever
Just cancel itFor all my claims above I have sent ticket today with screenshots from my registered email.
if you can:
Batch archive is good idea, but if I have multiple directories inside directories, then I want first child directory to have all of it’s subdirectory compressed to that same first child directory
Example
I have a folder in D:\pics
that folder has following folder
Cats
Dogs
FishesEach of the above folder has sub folder:
Black
White
Fluffy
ColorfulI want those sub folders(black, white, colorful, fluffy) not to be compressed individually, but the cats, dogs and fishes folders to be compressed individually
-
Dear PowerArchiver Team!
As I unfortunately found out, there is a big bug in Powerarchiver, which causes the compression rate to drop really significantly! I wonder if no one has noticed this yet? Are you guys still actively developing?
The following error occurs! (This is already as I find a blatant error!).ERROR:
File extensions and formats are not recognized automatically! If a file name e.g. Mütze.jpg is simply “renamed” in Mütze.txt, or
Mütze.png, Mütze.mp3, Mütze.pdf etc. each time a DIFFERENT compression algorithm is performed on the SAME FILE! Remember! The file extension was only renamed, so the file extension e.g. from .jpg to .txt is only by Rename changed! Just take a .jpg or .txt or .pdf file and change the file extension, you will see see this error! No headers are read automatically! Is this really wanted?Then the perfect compression algorithm can never be found and optimized by PowerArchiver? You should investigate this dramatic error once absolutely!Greetings from your trusty Konglomat!
Please stay healthy and make PowerArchiver more powerful than ever! I am looking forward to future updates! You are still awesome! Please keep up the good work! I love PowerArchiver, really more than just about anything!And will probably buy and use it for eternity!
-
Configuration:
Powerarchiver 2021 20.00.73
Windows 10 Education 10.0.19042 Build 19042When extracting gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf.tar.xz , Powerarchiver wrongly thinks some .exe files have a length of zero:
98773b3b-65c0-48fa-8cd4-d081b2e0adee-image.png
Once extracted:
D:\Temp\Powerarchiver\gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf\bin>dir *.exe Volume in drive D is DATA Volume Serial Number is 0E12-BCA2 Directory of D:\Temp\Powerarchiver\gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf\bin 2020-11-20 07:10 PM 1,391,599 arm-none-linux-gnueabihf-addr2line.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ar.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-as.exe 2020-11-20 07:41 PM 3,030,119 arm-none-linux-gnueabihf-c++.exe 2020-11-20 07:10 PM 1,389,293 arm-none-linux-gnueabihf-c++filt.exe 2020-11-20 07:41 PM 3,027,513 arm-none-linux-gnueabihf-cpp.exe 2020-11-20 07:10 PM 4,040,503 arm-none-linux-gnueabihf-dwp.exe 2020-11-20 07:10 PM 391,769 arm-none-linux-gnueabihf-elfedit.exe 2020-11-20 07:41 PM 0 arm-none-linux-gnueabihf-g++.exe 2020-11-20 07:41 PM 3,026,926 arm-none-linux-gnueabihf-gcc-10.2.1.exe 2020-11-20 07:41 PM 609,607 arm-none-linux-gnueabihf-gcc-ar.exe 2020-11-20 07:41 PM 609,607 arm-none-linux-gnueabihf-gcc-nm.exe 2020-11-20 07:41 PM 609,607 arm-none-linux-gnueabihf-gcc-ranlib.exe 2020-11-20 07:41 PM 0 arm-none-linux-gnueabihf-gcc.exe 2020-11-20 07:41 PM 2,165,533 arm-none-linux-gnueabihf-gcov-dump.exe 2020-11-20 07:41 PM 2,343,605 arm-none-linux-gnueabihf-gcov-tool.exe 2020-11-20 07:41 PM 2,450,233 arm-none-linux-gnueabihf-gcov.exe 2020-11-20 07:54 PM 9,605,899 arm-none-linux-gnueabihf-gdb.exe 2020-11-20 07:41 PM 3,028,997 arm-none-linux-gnueabihf-gfortran.exe 2020-11-20 07:10 PM 1,412,943 arm-none-linux-gnueabihf-gprof.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ld.bfd.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ld.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ld.gold.exe 2020-11-20 07:41 PM 25,546,567 arm-none-linux-gnueabihf-lto-dump.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-nm.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-objcopy.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-objdump.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ranlib.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-readelf.exe 2020-11-20 07:10 PM 1,393,083 arm-none-linux-gnueabihf-size.exe 2020-11-20 07:10 PM 1,392,464 arm-none-linux-gnueabihf-strings.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-strip.exe 32 File(s) 67,465,867 bytes 0 Dir(s) 1,002,422,431,744 bytes freeWhen the same archive is being extracted from a git bash session (after having installed git 2.30.1 for Windows 64 bit version from git-scm.com), the .exe files are extracted as expected:
xz -k -d gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf.tar.xz tar xf gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf.tar cd gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf/bin ll *.exe -rwxr-xr-x 1 User 197121 1391599 Nov 20 19:10 arm-none-linux-gnueabihf-addr2line.exe* -rwxr-xr-x 2 User 197121 1421598 Nov 20 19:10 arm-none-linux-gnueabihf-ar.exe* -rwxr-xr-x 2 User 197121 2028927 Nov 20 19:10 arm-none-linux-gnueabihf-as.exe* -rwxr-xr-x 2 User 197121 3030119 Nov 20 19:41 arm-none-linux-gnueabihf-c++.exe* -rwxr-xr-x 1 User 197121 1389293 Nov 20 19:10 arm-none-linux-gnueabihf-c++filt.exe* -rwxr-xr-x 1 User 197121 3027513 Nov 20 19:41 arm-none-linux-gnueabihf-cpp.exe* -rwxr-xr-x 1 User 197121 4040503 Nov 20 19:10 arm-none-linux-gnueabihf-dwp.exe* -rwxr-xr-x 1 User 197121 391769 Nov 20 19:10 arm-none-linux-gnueabihf-elfedit.exe* -rwxr-xr-x 2 User 197121 3030119 Nov 20 19:41 arm-none-linux-gnueabihf-g++.exe* -rwxr-xr-x 2 User 197121 3026926 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-10.2.1.exe* -rwxr-xr-x 1 User 197121 609607 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-ar.exe* -rwxr-xr-x 1 User 197121 609607 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-nm.exe* -rwxr-xr-x 1 User 197121 609607 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-ranlib.exe* -rwxr-xr-x 2 User 197121 3026926 Nov 20 19:41 arm-none-linux-gnueabihf-gcc.exe* -rwxr-xr-x 1 User 197121 2165533 Nov 20 19:41 arm-none-linux-gnueabihf-gcov-dump.exe* -rwxr-xr-x 1 User 197121 2343605 Nov 20 19:41 arm-none-linux-gnueabihf-gcov-tool.exe* -rwxr-xr-x 1 User 197121 2450233 Nov 20 19:41 arm-none-linux-gnueabihf-gcov.exe* -rwxr-xr-x 1 User 197121 9605899 Nov 20 19:54 arm-none-linux-gnueabihf-gdb.exe* -rwxr-xr-x 1 User 197121 3028997 Nov 20 19:41 arm-none-linux-gnueabihf-gfortran.exe* -rwxr-xr-x 1 User 197121 1412943 Nov 20 19:10 arm-none-linux-gnueabihf-gprof.exe* -rwxr-xr-x 4 User 197121 2572182 Nov 20 19:10 arm-none-linux-gnueabihf-ld.bfd.exe* -rwxr-xr-x 4 User 197121 2572182 Nov 20 19:10 arm-none-linux-gnueabihf-ld.exe* -rwxr-xr-x 2 User 197121 4550029 Nov 20 19:10 arm-none-linux-gnueabihf-ld.gold.exe* -rwxr-xr-x 1 User 197121 25546567 Nov 20 19:41 arm-none-linux-gnueabihf-lto-dump.exe* -rwxr-xr-x 2 User 197121 1404945 Nov 20 19:10 arm-none-linux-gnueabihf-nm.exe* -rwxr-xr-x 2 User 197121 1531656 Nov 20 19:10 arm-none-linux-gnueabihf-objcopy.exe* -rwxr-xr-x 2 User 197121 1991350 Nov 20 19:10 arm-none-linux-gnueabihf-objdump.exe* -rwxr-xr-x 2 User 197121 1421598 Nov 20 19:10 arm-none-linux-gnueabihf-ranlib.exe* -rwxr-xr-x 2 User 197121 1163376 Nov 20 19:10 arm-none-linux-gnueabihf-readelf.exe* -rwxr-xr-x 1 User 197121 1393083 Nov 20 19:10 arm-none-linux-gnueabihf-size.exe* -rwxr-xr-x 1 User 197121 1392464 Nov 20 19:10 arm-none-linux-gnueabihf-strings.exe* -rwxr-xr-x 2 User 197121 1531656 Nov 20 19:10 arm-none-linux-gnueabihf-strip.exe*The same archive file does extract properly under a native Linux Ubuntu 20.04 system, or under Windows 10 using the WSL2 Linux subsystem using xz and tar.
-
Hi! I came across an issue when I tried to uninstall PowerArch 2013. I got an error “The specified account already exists” which broke the process. I got the same error when I tried to install the current version, without uninstalling the previous one.
So I can’t uninstall and I can’t install PowerArchiver. Any suggestions? OS Windows 8.1 x64.Dariusz
Fast ring: PA 2016 16.10.07
-
Version:
PA 2016 16.10.07 (Fast Ring)Download:
http://dl.powerarchiver.com/2016/powarc161007.exeWhats New:
- Fixes since 16.10.05. This build will go on fast ring later on today and there will be full list of changes on the website.
Thanks for everyone sending their reports!
-
(almost) full list of changes:
http://www.powerarchiver.com/2016/05/25/powerarchiver-2016-16-10-07-released-2/IMPROVEMENTS
New progress window features
PA-49 - Add Ability to search files at all levels of folder structure (using find files)
PA-34 - Add file information for archive in extract/add dialog
PA-86 - Add support for latest Offline help files, publish offline help on download pages.
WEB-27 - Update help files with new tutorials and up to date information.
PA-55 - Explorer view: while browsing hdd in explorer mode, save last used location
PA-75 - Preview files in archive using keyboard (up/down arrows).
PA-92 - Do not save encryption options under last used options in PA main add window and PA shell add window
PA-95 - Display compression/extraction speed in progress window (MB/s)
PA-96 - Add support for PSF skins (format icons, toolbar icons).
PA-101 - Comment window - changed font in comment window also applies to the comment dock.
PA-109 - Backup: Keep %backupscriptname%.log as filename when clicking browse button to change path of log file
PA-112 - Create help tip over current filename in progress bar
PA-124 - update 7zip dll to 16.00
PA-133 - Automatically add new backup to the backup list when using main PA interface
PA-147 - do not add empty folders during backup with include only filter
PA-74 - Add new korean update to the installer
PA-117 - Add support for tar.xz in Archive Converter
PA-123 - Implement Always on Top option for other applications (Encryption Suite, Burner, Backup).
FIXES
PA-114 - FTP log output window - fix some spelling issues
PA-2 - FTP profile created in backup does not stay saved as FTP profile
PA-3 - Classic interface, burner/ftp/backup icons dropdown do not fit at 175% dpi
PA-9 - FTP: “after finishing queue” dropdown does not show checked items
PA-10 - Cloud: black border around treeview, despite skinned window
PA-17 - Wrong color for treeview when out of focus in dark skins
PA-25 - Cloud: Clear Saved Settings not being applied for OneDrive
PA-37 - Color coded list in modern skins should work the same as in classic
PA-38 - Remove app icons from start menu /programs folder if user registers Standard or Pro
PA-42 - Vitual Drive does not translate to Korean on Autodetect
PA-52 - Spanish version text display issues
PA-57 - Backup does not upload to specific cloud folder
PA-58 - Backup sort fields for Name and Last Run are not working in backup list in main PA - Backup interface
PA-71 - Backup: Remove ability to add blank filter in filters
PA-72 - Keyboard shortcut missing for OK button in Converter
PA-73 - CRC error on specific ZIP - add support for that specific ZIP archive.
PA-76 - PA 2012 nag screen comes up in PA 2016 Backup
PA-90 - Classic display style does not refresh file list
PA-91 - SFX: Cannot create Zip and CAB SFX archives with folders inside
PA-102 - Comment button not shown in default skin in status bar
PA-108 - Backup: Filename remains in title bar when running backup as standalone
PA-115 - online help does not work?
PA-116 - configure clouds button in modern icons - old icon under open button
PA-118 - Batch creating Tar.Gz files from .reg files also creates a .zipx file
PA-119 - Batch creating Tar.XZ files creates .tar filesPA-122 - Make GZ default Tar method instead of XZ
PA-125 - Subfolders not included in SFX’s correctly
PA-129 - Backup: Select Files/Folders window skipped when clicking Next in backup
PA-153 - Remove: Burn disc from .iso from PRO version shell
PA-154 - Cloud 2016 written twice in Cloud caption bar
PA-155 - Toolbox shell options show in registered pro version
PA-121 - Psf skins: interface skins resets to base when psf skin loaded.
PA-148 - Comment window dock shows white background in black skins.
PA-131 - Testing of bz2 files does not work properly due to specific bz2 archives (disabled testing option)
PA-99 - Fixed support for specific .ARC archive.
PA-121 - Psf skins: interface skins resets to base when psf skin loaded.
-
A nice little list, more like it in future please. :)
Windows 10 Home 64-bit
Intel Core i7 6700HQ @ 2.60GHz
12.0GB Dual-Channel DDR3 @ 798MHz -
A nice little list, more like it in future please. :)
due to new issue/project management tool we use, it is easy to export these… it is not 100% list since we had 7 internal releases to get to here but overall yes, it is nice :-)
-
Hi,
I have not been using PowerArchiver for a while and decided to use it again. A few comments.
The various modules i.e. the burner, backup etch, is it possible to run it with the same theme as the main program when you run them individually?
In the burner, if you make a cd\dvd from an iso image there seems to be no option to verify the disc? Could it be possible to have an option not to eject the disc once it is burnt?
Thanks
Brett
-
Hi,
I have not been using PowerArchiver for a while and decided to use it again. A few comments.
The various modules i.e. the burner, backup etch, is it possible to run it with the same theme as the main program when you run them individually?
In the burner, if you make a cd\dvd from an iso image there seems to be no option to verify the disc? Could it be possible to have an option not to eject the disc once it is burnt?
Thanks
Brett
they should run with the same theme… if they are not, try changing skin to something else and back to desired skin. Mili will comment about verify.
-
Hi
I use the Windows 10 theme, but if I run the dvd burner program separately, it opens with a lot of colourful tiles. If I run the burner from within Powerachiver, then it uses the correct theme
-
hello,
The highlighted Options button will bring up an additional options dialog where you can select verify files after burning.
Will also check skins when apps are run standalone. thanks!
-
Hi,
I have no options when I select the option to burn a disc from an ISO image, if I do a normal burn then the option is there. Could you also add an option not to eject the disc after burning? I have almost damaged by drive because my previous burning software never ejected the disk.
-
Hi,
I have no options when I select the option to burn a disc from an ISO image, if I do a normal burn then the option is there. Could you also add an option not to eject the disc after burning? I have almost damaged by drive because my previous burning software never ejected the disk.
Thanks for the clarification.
We will check if the option to load tray back after burning can be added to ISO burner as well.Also, if you use the “load disc back on finish” option in regular burner, let us know how it worked out of you.
Thanks!
-
Hi,
Another function/ability that is missing from PowerArchiver is the ability to extract a exe driver file, like the Intel Chipset drivers, other programs like 7-zip allow you to extract the contents of the exe so you can then manually install the drivers without running the installer. I cant seem to be able to do this with PowerArchiver.
-
Once an EXE installation is opened in PowerArchiver, PowerArchiver will prompt whether to install it or open it.
Post a link to the driver’s you found, we’ll take a look.Thanks!
-
