-
PA 21.00.18 running on Windows 7 64 bit.
I made a big .PA file and thought I’d check it was made correctly with Menu / Actions / Test.
Discovered:
a) PA always issues a UAC prompt to do this!
b) PA always says there are many errors in PA files. -
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
In the latest version of PA, on W11 (latest build/SP) when you try to use the first level context menu - NOTHING HAPPENS (particularly when you do this from Downloads or Documents folders) - however I noticed that it DOES WORK when you use the context menu from the Desktop. Going to the second level context menu does work however.
-
PA 2023 22.00.08
Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
Virtual driver PA 2023-01-28 152607.png
It seems a standard problem with new releases :-)
Can I have a link or can it be fixed. Thank you. CU later -
When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.
The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.
The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.
Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.
The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.
The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.
-
In PowerArchiver 2023 22.00.06 configuration, the option labelled “Start PowerArchiver 2023 Starter when my computer starts” seems to be redundant.
I am only allowed to change this option when PA Starter is disabled, and then it seems to be ignored.
When I enable PA Starter this option is forced to the enabled state.
I think it’d be good to remove “Start PowerArchiver 2023 Starter when my computer starts” completely. I’ve always found it confusing having both options.
Added later: However i don’t particularly want to use queue but I do like having the PAStarter icon in my tray area.
-
W10 Pro 22H2 - 64 -bit
PA 22.00.06 (PA 2023)
It has been the case with previous versions of PowerArchiver, but I had hoped that the latest might behave differently. Not so, I’m afraid.
I have, for various obscure reasons, created a few .pa archives, mainly in the hope that they will save me some more space. From time to time, I use the “Test” option to check that important archives are OK and uncorrupted.
With every .pa archive I’ve tested, the process runs through OK but then reports that there are errors. This is always the number of files in the archive e.g. if 11 files, then 11 errors reported.
In the .pa, I can:-
preview the files (usually PDF) extract some or all files and look at or use them convert the .pa to a .zip or .zipx archive, which then works fine and tests without errorsIs it the case that the Test routine isn’t designed for .pa archives, or is there another reason? Although the .pa seems to function properly, despite the test reporting errors, I would like to be sure that every .pa is OK and not “broken”.
Some of the .pas are quite old and produced with earlier PA versions (they are truly “archives”). If I extract all the files in the old .pa, create a new, fresh .pa and add back the files to that, then test the new, no errors (at least in the .pa I’ve tried this on) are reported. This would suggest a mismatch between old .pas and newer versions of PA itself.
-
Clipboard02.jpg
See the, supposedly, blank space where the green box is? It’s like that in Modern Light theme too. I can toggle it, but it’s missing text or shouldn’t be there I guess?
Thanks :)
-
Dear @Alpha-Testers and all of our users,
time has come for testing of PowerArchiver and PACL for macOS.
Please let us know here if you have Mac and can test latest builds.Features implemented:
PowerArchiver 2020 - tabbing, opening, extracting, adding, testing, favorite folders, support for multiple languages, opening via Finder, explorer mode, installer.
PACL 10 - support for most formats and features in Windows version.Upcoming: Tools such as archive converter, batch zip, multi-extract.
To start testing, please sign up here in this thread, and we will send you latest build.
thank you!
Ashampoo_Snap_Wednesday, November 20, 2019_12h54m56s_008_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m05s_009_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m14s_010_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m30s_011_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m39s_012_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m49s_013_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h56m00s_014_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h54m43s_007_.png
76e97ab9-8d75-4175-9ce8-446500031f38-image.png
How do i right click compress to name of file
-
Hi, i used to be able to do this on the universities computer who had power archiver installed but not on my own computer at home and that is when ever i right click on a file i wish to compress at university it says compress to “Filename”.zip (this is what i want to do) at home when i right click it says compress to “Folder the file is in”.zip This is annoying as why would i want to call my new zip file the folder it is in. So how can i set it so when i right click it will compress to the nane of the file.
Also could i ask if you could make this a default setting on newer versions.
Thank you
Anthony -
Windows Explorer right click menu choices are configured under “Options / Configuration / Shell Extensions”.
However, right-clicking on a single file (e.g. foobar.txt) in Windows Explorer does offer “Compress to foobar.zip” as default :confused:
If you right-click on a folder, that is when it offers “Foldername.zip”
I therefore assume you are right clicking after selecting multiple files and want to compress each one individually - if so, this is not possible (at least, not yet - it is probably one of the oldest things on the wishlist).
To compress multiple files individually, you should launch the “Tools/Batch Zip” utility from within PowerArchiver.
-
Yes you are right but what i am actually wanting to do is choose a bunch of files and put them in the one archive with the name of the file i have right clicked on.
So if i have three files (say two txt files and an exe file) i select them all but then on the last one (eg. the exe file) that i want the zip file to be called i right click on that last one and instead of giving me the name of that file to zip up with it usually says either Desktop.zip or New Folder.zip depending where those three files were located. I do not want this. So is it possible to change to this.
This used to work at university so im sure its possible
Thanks
-
So if i have three files (say two txt files and an exe file) i select them all…
OK - with you so far
@Anthony1uk:… but then on the last one (eg. the exe file) that i want the zip file to be called i right click on that last one …
But here, you lost me :confused:
If I do that, then the other selected files are deselected, I am now only compressing the last file - so I am offered “filename.zip”.
If you meant shift-click (or ctrl-click) on the last one to select all the files - then it works as I said : “FolderName.Zip” for multiple files.
This used to work at university so im sure its possible
Not in windows explorer, maybe you were using the new archive/add to archive dialog within PowerArchiver when the zip file had already been named?
-
Thanks for all your help on this but i will show you what i am meaning i have uploaded a screen capture of my computer desktop as an AVI format, I have uploaded it to a you sendit file here to show you what happens when i try to right click zip something
http://s8.yousendit.com/d.aspx?id=14F5PTNTIRBPR1JBOEGTPNUT8K
What i want to do is select a bunch of files, right click and have the zip archive to be the name of the file i right clicked on like i say it definitely used to work at university. It may have been a different zip program i was using at uni but i am sure it was power archiver, and if you say it works then i am assuming its just my computer acting up as if you say its possible but it does not seem to work for me.
The screen capture will show what happend.
Thank for all your help and patience on this.
Anthony -
Ahh, you are not using Windows Explorer ! You have files on the desktop and are “lassooing” them (Click and drag).
Just tried this, it seems that if you lasso shortcuts, then right click on one of them - only the target of one you rightclick on is compressed (so individual filename.zip is offered), but if you lasso actual files then all are compressed and it works the same way as I described in Windows Explorer (with the foldername being DeskTop.zip).
So, it actually works the same way as I decribed before.
-
Thanks but is there anyway that i could set it now or you could set in future releases that if i choose three objects and right click on one them the archive will be named what i right clicked on.
As to me it seems strange it would only give you the option to call it desktop.zip i mean why would anyone want to call their archive that?
Thanks for all your help though
-
As to me it seems strange it would only give you the option to call it desktop.zip i mean why would anyone want to call their archive that?
Because that is the name of the directory/folder the files are in. If you saved them to
“C:\Program Files\This Is My Program”
Then the Zip would be named “This Is My Program.zip” :rolleyes:Thanks but is there anyway that i could set it now or you could set in future releases that if i choose three objects and right click on one them the archive will be named what i right clicked on.
You could create a Folder on the desktop “This Is My Program”, move your files into it and then Zip that Folder :)
You could always make a request in the Forum Wishlist - however, I’m not sure how you think PowerArchiver would pick which of the filenames to use from the list provided by Windows Explorer or how users would be able to control it.
Choosing (and/or lassoing) and then right-clicking depends on Windows Explorer and not PowerArchiver. The filenames are then passed as a list to PowerArchiver via the context menu.Usually, the order of files in the list is not important.
Maybe when CTRL-clicking explorer provides the list of files in “selection” order (last clicked is last in list)?
Don’t know what the order would be when “lassoing” though (alphabetical?).P.S. I’m another user I don’t work for Conexware/Powerarchiver :D
-
Thanks but is there anyway that i could set it now or you could set in future releases that if i choose three objects and right click on one them the archive will be named what i right clicked on.
As to me it seems strange it would only give you the option to call it desktop.zip i mean why would anyone want to call their archive that?
Thanks for all your help though
Say you want to put aa.txt bb.doc and cc.exe into cc.zip.
Right click cc.exe and create cc.zip containing just cc.exe
Then select aa.txt and bb.doc and drop them on to cc.zip
cc.zip will now contain copies of all three files
