-
W10 Pro 22H2 - 64 -bit
PA 22.00.06 (PA 2023)
It has been the case with previous versions of PowerArchiver, but I had hoped that the latest might behave differently. Not so, I’m afraid.
I have, for various obscure reasons, created a few .pa archives, mainly in the hope that they will save me some more space. From time to time, I use the “Test” option to check that important archives are OK and uncorrupted.
With every .pa archive I’ve tested, the process runs through OK but then reports that there are errors. This is always the number of files in the archive e.g. if 11 files, then 11 errors reported.
In the .pa, I can:-
preview the files (usually PDF) extract some or all files and look at or use them convert the .pa to a .zip or .zipx archive, which then works fine and tests without errorsIs it the case that the Test routine isn’t designed for .pa archives, or is there another reason? Although the .pa seems to function properly, despite the test reporting errors, I would like to be sure that every .pa is OK and not “broken”.
Some of the .pas are quite old and produced with earlier PA versions (they are truly “archives”). If I extract all the files in the old .pa, create a new, fresh .pa and add back the files to that, then test the new, no errors (at least in the .pa I’ve tried this on) are reported. This would suggest a mismatch between old .pas and newer versions of PA itself.
-
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
-
PA 21.00.18 running on Windows 7 64 bit.
I made a big .PA file and thought I’d check it was made correctly with Menu / Actions / Test.
Discovered:
a) PA always issues a UAC prompt to do this!
b) PA always says there are many errors in PA files. -
I installed powarc-macos20001.dmg and I am attempting to create a password protected zip file. When I create the zip in the UI it doesn’t write the file to the destination folder. No error message is displayed. The PA app has full folder permission. I’m new to Mac, but have been running PA on Windows for a long time.
Will there be a new version of the Mac version soon?
-
Hi! I came across an issue when I tried to uninstall PowerArch 2013. I got an error “The specified account already exists” which broke the process. I got the same error when I tried to install the current version, without uninstalling the previous one.
So I can’t uninstall and I can’t install PowerArchiver. Any suggestions? OS Windows 8.1 x64.Dariusz
-
Where are various settings store . . . e.g. ftp, etc.
-
d40b03ac-1a7a-4358-8d6c-0ec7f455de04-image.png
should the image have a white background?
-
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
Powerarchiver 2022
Right-click and select Encrypt on a folder does not work.
Although it says it encrypts, there is no encrypted file in the destination folder. -
The online update feature within the program suggests there is a later version than the ‘.17’ available on the web site. But clicking either download or update just reinstalls version .17.
Either there isn’t an update OR
the “download” and 'update" links should be repaired. -
Hi Dear,
Cannot login and request resend license code for my fd
-
Hi,
When you click on the Buy Now link, you come across four tabs - Home or Work, Enterprise Unlimited, Educational Discount, & Gift Discount.
What is the difference between a licence purchased via Gift Discount and a Home/Work licence?
Also, how can I renew the PowerArchiver Select plan a year after the purchase? Will it remind me automatically?
Best,
-
I’m running PA 21.00.17 64-bit on a 64-bit i7 desktop with W10 Pro, latest version. This 32gb of installed RAM.
As I use the PA pbs system for a number of scheduled archiving operations throughout the day, PA Starter is set to load and run at system startup.
In the course of trying to identify some causes of slowness and bottlenecks in other processes, I notice that PA Starter (PAS) always runs at between 11% and 15% of CPU (see screenshot), usually at about 12-13%. This is by far the highest demanding process on the system, as shown by Task Manager. In Performance Monitor, PAS Average CPU is 8.32, with every other process at less that 1 i.e. in decimal places only.
Task Manager also shows PAS Power Usage as “Very High”, and is the only process shown thus.
I have looked again at the information about PAS at https://wiki.powerarchiver.com/en:help:details:powerarchiver_starter, which was last modified in 2016. The article states a low memory usage for PAS of 784k, which is fair enough, but it is the large CPU overhead which is of concern.
It is of course possible to change the PAS priority, but this has no effect on CPU overhead.
However, is it possible to change PAS, which is required only at intervals to initiate PA scheduled tasks, from consuming so much system resource for every moment of the day?
PA Starter.jpg
Missing config item
-
Wasn’t there an option in the “general” section of the “misc.” tab where the user could set the maximum number of Virtual Drives?
If so, I do not see it any more.
Am I mistaken about where it is located?
If so, I apologize in advance.
-
Wasn’t there an option in the “general” section of the “misc.” tab where the user could set the maximum number of Virtual Drives?
There sure was or should I say ‘is’.
It’s there on mine anyway, don’t know why it’s not showing for you though. :confused:
I presume we are both using version 15.01.03.
-
confirmed…tis showing on mine also. (v.15.01.03)
Windows 8.1 x64 -
That is exactly where I thought it was. As you can see, it is not there.
Maybe my screen settings are different and it is cutting it off?
-
My screen settings are at 100%.
as you can see the space where I thought it was. It just isn’t showing.
I may try an uninstall and reinstall.
-
My screen settings are at 100%.
Can’t see that being the issue then, it’s a mystery.
Maybe a fresh install would be the way to go. An inconvenience I know, but sometimes it’s the best thing to try.
At least you know you weren’t imagining things and that it should definitely be there. ;) -
Fresh install did not help. Still not there. Had been until this update.
-
Fresh install did not help. Still not there. Had been until this update.
Guess this one is for Mili then. :)
-
Hmm, I’ve checked on 2 machines and I have the same issue as Socrates. No Number of Virtual Drives option.
Luxor, are you sure you’re using 15.01.03?
If so, please send over your reg settings(Cabbed) to mili at conexware dot com and we’ll take a look.
Nice mystery we have here :) -
Twice in two days I’ve discovered I am not a techno-ditz!
-
Many bugs were found and fixed with your help, Socrates!
Keep em comin :D -
-
Thanks Luxor! Can’t reproduce it yet. Really weird
Moving now to another machine with a different OS to check there to see if it makes a differencewill report back with findings
-
Thanks. At this point I am just curious.
-
Thanks Luxor! Can’t reproduce it yet. Really weird
Both Moles and myself have the Virtual Drives option there, so definitely weird indeed.
-
To add to the mystery. It doesn’t show on my laptop running 7 (64) either.
My guess: the height of the dialogue window just has to be slightly increased. I can see a space where it is supposed to go. Just enough space for it to show.
-
TO confirm i too have virtual drives on my
Windows 7 system at work BUT not on one of my Windows 7 system’s at home?! both are laptopson another system windows 7 PC Based it does show, I cant remote my Windows 8 systems just yet so will try and verify later.
If you want a system snapshot of my specs etc let me know.
-
Thanks Rich! Please do let us know what you find and if it appears on the W8 machine.
:) -
excellent catch guys, excellent!
-
Appears on a clean install of Windows 8.1 64 Bit.
-
. . . for I tried a a clean install, and it didn’t appear (also 8.1 - 64)
I suspect changing the height of that dialogue window, even by 10 pixels, would solve the problem.
-
Still no VD option in the newest PA (just posted) on a Window 7 x32 machine.
-
this has been improved now:
http://www.powerarchiver.com/test/release15/powarc150106.exe -
Fixed on this laptop. I suspect it is fixed on all.
-
yes, it was a good catch… PA checked for pavd2013.exe to show this option… so if you had old PA installed and then PA 2015, it would work fine… only on clean systems it would not show, which is why we or nobody else caught it before.
-
I don’t know how you all do it. There are so many ways well-designed software can go wrong. As users we forget that it is not just the integrity of one piece of software, but how well it plays with everything else on every user’s machine.
-
I don’t know how you all do it. There are so many ways well-designed software can go wrong. As users we forget that it is not just the integrity of one piece of software, but how well it plays with everything else on every user’s machine.
Couldn’t agree more. :)
