-
PA2023 Win10, (same problem with older releases but never reported)
PA Soft is installed on partition D. (exclusive for installed progs)
Then I created on my partition G: the folders as configured in PA Settings ‘Folders’.0fcf1b09-1b91-4b74-b250-f8cf908a3348-Ashampoo_Snap_maandag 20 maart 2023_11h54m34s.png
Screenshot 2023-03-20 121152.png
The problem : Any activity on PA is saved in these folders…
PA ignores them and still use the default settings. Whats wrong ? Regards, Pirrbe -
I am still using Powerarchiver 2022 and it does not show pdf markups in the preview. Is there a setting to get version 2022 to show pdf markups in the preview? If not, does this work in version 2023?
-
The question that I have about PA archives is what happens if say ConeXware, as a company, dies in the future? What happens to any PA files that are created today? Can these files be decompressed with a copy of a PowerArchiver that can no longer phone home to the mothership thus can’t be registered or activated?
I mean, I can understand that new PA files wouldn’t be able to be created if the program isn’t registered but what about an un-registered copy because well, the question that I posed above?
It’s questions like this that make me not want to store anything really valuable in PA files out of fear that I, at some point in the future, might lose access to said data inside those files. OK, 7ZIP might not be able to compress as heavily as PA but at least it’s open source and any 7ZIP files will still be able to be read and decompressed ten, twenty, or fifty years from now.
-
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
-
Is this a known problem? Is there a fix coming? This is a primary reason I buy PA.
I’ve tried both methods I know to extract multiple zips at the same time. 1) Multi Extract feature in the GUI. 2) In Windows File Explorer, select multiple zips, right click, use PA context menu to Extract or Extract To…
Is there a setting I missed? Or maybe it really is processing in parallel, but I can’t detect it? Nothing tells me in the Processes in Task Manager that multiple PA extracts are running. And my CPU, memory and disk resources do not look like a lot of extracts are running.
I’m using PA 2022 Standard version 21.00.18 on Windows 11 Pro version 10.0.22621 Build 22621.
-
In the latest version of PA, on W11 (latest build/SP) when you try to use the first level context menu - NOTHING HAPPENS (particularly when you do this from Downloads or Documents folders) - however I noticed that it DOES WORK when you use the context menu from the Desktop. Going to the second level context menu does work however.
-
Is the version Preview 2023 also considered to be tested by the testteam ? In the past we got messages in the forum for testing out version x.x, to be downloaded by fastring, or I missed the one for 2023. (I discovered 2023 on the official web…)
CU, Pirrbe.
-
PA 2023 22.00.08
Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
Virtual driver PA 2023-01-28 152607.png
It seems a standard problem with new releases :-)
Can I have a link or can it be fixed. Thank you. CU later -
Hi there, been a user since 13 years now and in past whenever I had a problem or question I could email, however since 3 weeks it seems like everybody is dead?
Anyway, as kind of a last resort, I post this email a 4th time but in this forum instead now, in the hope for help:
"This is the 3rd time I am emailing you guys as I am missing a working code for the preview of Power Archiver 2023Can you please help me? I am a 13 years lasting customer of yours, and I am shocked thatr for whatever reason my support tickets are ignored now, why?
thanks in advance!
All the best!
Joerg" -
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
PA 21.00.18 running on Windows 7 64 bit.
I made a big .PA file and thought I’d check it was made correctly with Menu / Actions / Test.
Discovered:
a) PA always issues a UAC prompt to do this!
b) PA always says there are many errors in PA files. -
When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.
The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.
The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.
Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.
The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.
The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.
Cloud: Autorize SkyDrive doesn't work
-
After pressing OK to enable the permissions for PA (Which are a lot, can yo u explain why?)
The form just stays blanco. And none responsive.
-
I guess it took so long to create the filelist.
-
it is hard to understand whats going on :-)
I guess i need to try it out myself.
-
you mean why all the access rules? dunno, thats how it works… it is only your PowerArchiver though, not some web application, but your local PA.
-
so how many files do you have there? was it faster 2nd time? was it non responsive first time? I got nothing inside right now, so i will try to reproduce.
-
Ironically, I was just going to make a post about this.
Skydrive seems from the start go unstable.
The 1st this is the Authorize Dialog hangs once you have logged in and there is now way other that to exit the application via task manager.
Then there seems to be a delay or hang on most of the files and folders.
Attachment Cloud and Dropbox both worked without issue and are quick.
-
Authorize is an IE window that access’s the SkyDrive website… once you authorize it, it saves the token on your computer… but thats all up to SkyDrive I believe… we will see more about it.
-
Trying to get Google Drive to work. I clicked on it and it took a minute, opened a window, then asked for email and password.
Entered the info, then the screen updated and wanted me to accept the terms, which I did. It takes a few seconds and then it gives an error unable to load the page.
-
Trying to get Google Drive to work. I clicked on it and it took a minute, opened a window, then asked for email and password.
Entered the info, then the screen updated and wanted me to accept the terms, which I did. It takes a few seconds and then it gives an error unable to load the page.
yeah, i just checked, it is all done via Google pages - it doesnt have anything to do with PA itself - it doesnt go to our site, nor anything is stored on our site… it is all done by google.com and whatever the name of skydrive itself is.
Now I wonder if the problems people are having are due to crappy IE, because it is IE that opens up as it is always installed on the system. But there is nothing we can do about that though.
It does seem that IE11 they have in 8.1 I am using is finally usable… 10 was horrible on my computer, didnt want to load anything properly.
-
FYI, my 25GB SkyDrive is almost Full.
-
Second time is just as slow.
-
a lot of files - how many files are there and how long it takes? We can at least make it more responsive… i will upload a lot of small files to mine to test
-
we were able to improve the load times for the file list, lets see by how much.
-
ok, so 15s for .20 vs 28s for .18, for logging/loading filelist Skydrive. So abou 2x faster for newer version.
This is for +1000 files or so… we also added some “progress” messages and little bit more responsive, also fixed total upload progress bar.
It is not perfect yet, but it is better.
-
it takes almost 5 minutes…
-
so it will take 1/2 now, at least :P
we could do caching… we will see… (in the future)
-
well this is already 1/2 :)
-
what version are you trying?
-
.20
-
:-)
-
do you have many sub folders?
maybe we could read only main folder and then later cache rest of them…. but otherwise, it is slow due to Skydrive in general… i just checked their options and nothing really too good that we can do, except to only open root folder.
-
i was testing google drive vs SkyDrive… Google has a lot more options for API. And it is a LOT faster off the bat… it is 3-4 seconds for 1000+ files for me, while 14s for SkyDrive for same amount of files.
-
Authorize is an IE window that access’s the SkyDrive website… once you authorize it, it saves the token on your computer… but thats all up to SkyDrive I believe… we will see more about it.
Can you not write a time out script so if the screen stays for a period of time it then closes the windows?
The problem isn’t with waiting it’s the fact that your stuck andunable to uuse PowerArchiver until it’s finished.
-
10.000 files, 351 folders
Windows 11 Pro ENU x64
Intel Core I7
32 GB RAM -
-
10 folder and 2 files in root
-
ok, so this update is live for everyone (.20)… it is also different from your’s guido… but nothing related to SkyDrive or clouds…
