Navigation

    • Register
    • Login
    • Search
    • Categories
    • Recent
    • Tags
    • Popular
    • Search
    • PA 21.00.18 testing via context menu causes extraction of files

      D

      When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.

      The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.

      The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.

      Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.

      The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.

      The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.

      Tech Support
    • Start PowerArchiver 2023 Starter when my computer starts

      Brian Gregory

      In PowerArchiver 2023 22.00.06 configuration, the option labelled “Start PowerArchiver 2023 Starter when my computer starts” seems to be redundant.

      I am only allowed to change this option when PA Starter is disabled, and then it seems to be ignored.

      When I enable PA Starter this option is forced to the enabled state.

      I think it’d be good to remove “Start PowerArchiver 2023 Starter when my computer starts” completely. I’ve always found it confusing having both options.

      Added later: However i don’t particularly want to use queue but I do like having the PAStarter icon in my tray area.

      Tech Support
    • Testing .pa archives

      PA_Fan

      W10 Pro 22H2 - 64 -bit

      PA 22.00.06 (PA 2023)

      It has been the case with previous versions of PowerArchiver, but I had hoped that the latest might behave differently. Not so, I’m afraid.

      I have, for various obscure reasons, created a few .pa archives, mainly in the hope that they will save me some more space. From time to time, I use the “Test” option to check that important archives are OK and uncorrupted.

      With every .pa archive I’ve tested, the process runs through OK but then reports that there are errors. This is always the number of files in the archive e.g. if 11 files, then 11 errors reported.

      In the .pa, I can:-

      preview the files (usually PDF) extract some or all files and look at or use them convert the .pa to a .zip or .zipx archive, which then works fine and tests without errors

      Is it the case that the Test routine isn’t designed for .pa archives, or is there another reason? Although the .pa seems to function properly, despite the test reporting errors, I would like to be sure that every .pa is OK and not “broken”.

      Some of the .pas are quite old and produced with earlier PA versions (they are truly “archives”). If I extract all the files in the old .pa, create a new, fresh .pa and add back the files to that, then test the new, no errors (at least in the .pa I’ve tried this on) are reported. This would suggest a mismatch between old .pas and newer versions of PA itself.

      Tech Support
    • PA 21.00.18 Action / Test behaves oddly for me on .PA files

      Brian Gregory

      PA 21.00.18 running on Windows 7 64 bit.
      I made a big .PA file and thought I’d check it was made correctly with Menu / Actions / Test.
      Discovered:
      a) PA always issues a UAC prompt to do this!
      b) PA always says there are many errors in PA files.

      Tech Support
    • Small UI / Theme bug in 2023

      Z

      Clipboard02.jpg

      See the, supposedly, blank space where the green box is? It’s like that in Modern Light theme too. I can toggle it, but it’s missing text or shouldn’t be there I guess?

      Thanks :)

      Tech Support
    • PowerArchiver and PACL for macOS

      spwolf

      Dear @Alpha-Testers and all of our users,

      time has come for testing of PowerArchiver and PACL for macOS.
      Please let us know here if you have Mac and can test latest builds.

      Features implemented:
      PowerArchiver 2020 - tabbing, opening, extracting, adding, testing, favorite folders, support for multiple languages, opening via Finder, explorer mode, installer.
      PACL 10 - support for most formats and features in Windows version.

      Upcoming: Tools such as archive converter, batch zip, multi-extract.

      To start testing, please sign up here in this thread, and we will send you latest build.

      thank you!

      Ashampoo_Snap_Wednesday, November 20, 2019_12h54m56s_008_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m05s_009_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m14s_010_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m30s_011_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m39s_012_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m49s_013_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h56m00s_014_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h54m43s_007_.png

      76e97ab9-8d75-4175-9ce8-446500031f38-image.png

      Tech Support
    • Functions in Windows 11 context menu no longer work after last Windows Update

      T

      For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.

      I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.

      Tech Support

    PA screen position

    Tech Support
    5
    12
    16176
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      Carlospr last edited by

      Hi again,

      I like to use my Windows XP task bar (the bar with Start button :D ) in the upper part of the screen (like Mac style…).

      However, this PA version sometimes starts in the upper part of the screen, behind the task bar!

      So, I’m not able to move PA window using the mouse (the right click in PA task bar button does not show a “Move” option). I have to resize task bar to get access to PA and, then, move it down…

      It’s quite annoying and I don’t remember last version (8.xx) did that…

      I hope there’s a workaround to fix this.

      :cool:

      1 Reply Last reply Reply Quote 0
      • C
        Carlospr last edited by

        I’m still testing PA…

        Today, PA went out of screen…

        Something is wrong with the way PA saves its position… :confused:

        C 1 Reply Last reply Reply Quote 0
        • C
          Carlospr @Carlospr last edited by

          I’m wondering if the PA screen position weird behavior is happening just with me… :confused: :(

          J 1 Reply Last reply Reply Quote 0
          • J
            Jr heuwing @Carlospr last edited by

            @Carlospr:

            I’m wondering if the PA screen position weird behavior is happening just with me… :confused: :(

            I think so, never had problems with that.

            Maybe you are using 2 screens or there is an virtual desktop function active ?

            Keep looking for interesting software.

            C 1 Reply Last reply Reply Quote 0
            • C
              Carlospr @Jr heuwing last edited by

              No and no…

              The first thing is that I use Windows task bar in the upper part of the screen.

              Second, if I download a zip file and press open, PA opens normaly. Then I make a second, third download and each time I press open… PA opens but its screen position change is getting higher and higher… If I resize Windows task bar PA title bar turns visible again…

              :confused:

              ivan 1 Reply Last reply Reply Quote 0
              • ivan
                ivan conexware @Carlospr last edited by

                I couldn’t reproduce the issue - checked with taskbar on the top on Windows XP.

                Can you please run PowerArchiver, and from Options menu choose “Set installation defaults”, then close PA and try using all again?

                C 1 Reply Last reply Reply Quote 0
                • C
                  Carlospr @ivan last edited by

                  Hi Ivan,

                  I made what you said but the issue still remains. I also uninstalled PA and then reinstalled with no results…

                  I changed the Windows XP taskbar to the botton of the screen and then PA position was recorded normally. Everytime I started PA it started at the same screen position.

                  I placed the Windows XP taskbar to the upper position again and I got the same issue: everytime I started PA it started at a higher screen position…

                  Then I decided to install version 8.60: it’s working normally, even with the Windows XP taskbar placed at the upper screen position…

                  :confused:

                  K 1 Reply Last reply Reply Quote 0
                  • K
                    klitos @Carlospr last edited by

                    Hi,

                    Just noticed this and thought I’d try it. I can reproduce the problem. Try the following: move the Windows XP task bar to the top. Right-click on the task bar, select Properties, and disable AutoHide. This ensures that the task bar is always visible, and that all currently visible icons and application windows are pushed down by the width of the taskbar.

                    This gives rise to the concept of having different logical and physical screen coordinates. The logical screen coordinates start at the bottom of the task bar (since nothing but the task bar itself can appear above that position), whereas physical screen coordinates start at the top of the screen.

                    Now start Power Archiver. Notice where it has positioned itself. Without changing that position, do something with it, e.g. view an archive (if you just exit without doing anything, it may not bother saving its last position). Now exit Power Archiver, and start it again. You will notice that its screen position has shifted up a bit. The amount it has shifted is the width of the task bar. It is as if, on exit, it saves its position using logical screen coordinates but, on start up, it restores its position using physical coordinates.

                    HTH,
                    Klitos

                    C 1 Reply Last reply Reply Quote 0
                    • C
                      Carlospr @klitos last edited by

                      Thanks klitos for your great issue analysis!

                      That’s exactly what is happening!

                      ivan 1 Reply Last reply Reply Quote 0
                      • ivan
                        ivan conexware @Carlospr last edited by

                        Thanks klitos!

                        The bug will be fixed in next release!

                        spwolf 1 Reply Last reply Reply Quote 0
                        • spwolf
                          spwolf conexware @ivan last edited by

                          Hi,

                          please check it with 9.00.35 release:
                          http://www.powerarchiver.com/test/powarc90035.exe

                          And make sure you test it a bit so there are no other issues.

                          thanks,

                          C 1 Reply Last reply Reply Quote 0
                          • C
                            Carlospr @spwolf last edited by

                            The new version was tested for some days and it’s working!

                            :)

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post