Navigation

    • Register
    • Login
    • Search
    • Categories
    • Recent
    • Tags
    • Popular
    • Search
    • Config settings doesn't impact PA behaviour...

      pirrbe

      PA2023 Win10, (same problem with older releases but never reported)
      PA Soft is installed on partition D. (exclusive for installed progs)
      Then I created on my partition G: the folders as configured in PA Settings ‘Folders’.

      0fcf1b09-1b91-4b74-b250-f8cf908a3348-Ashampoo_Snap_maandag 20 maart 2023_11h54m34s.png

      Screenshot 2023-03-20 121152.png

      The problem : Any activity on PA is saved in these folders…
      PA ignores them and still use the default settings. Whats wrong ? Regards, Pirrbe

      Tech Support
    • Missing pdf markups in pdf preview

      L

      I am still using Powerarchiver 2022 and it does not show pdf markups in the preview. Is there a setting to get version 2022 to show pdf markups in the preview? If not, does this work in version 2023?

      Tech Support
    • Question about PA Files...

      T

      The question that I have about PA archives is what happens if say ConeXware, as a company, dies in the future? What happens to any PA files that are created today? Can these files be decompressed with a copy of a PowerArchiver that can no longer phone home to the mothership thus can’t be registered or activated?

      I mean, I can understand that new PA files wouldn’t be able to be created if the program isn’t registered but what about an un-registered copy because well, the question that I posed above?

      It’s questions like this that make me not want to store anything really valuable in PA files out of fear that I, at some point in the future, might lose access to said data inside those files. OK, 7ZIP might not be able to compress as heavily as PA but at least it’s open source and any 7ZIP files will still be able to be read and decompressed ten, twenty, or fifty years from now.

      Tech Support
    • Functions in Windows 11 context menu no longer work after last Windows Update

      T

      For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.

      I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.

      Tech Support
    • Multi Extract doesn't extract in parallel in Windows 11

      Z

      Is this a known problem? Is there a fix coming? This is a primary reason I buy PA.

      I’ve tried both methods I know to extract multiple zips at the same time. 1) Multi Extract feature in the GUI. 2) In Windows File Explorer, select multiple zips, right click, use PA context menu to Extract or Extract To…

      Is there a setting I missed? Or maybe it really is processing in parallel, but I can’t detect it? Nothing tells me in the Processes in Task Manager that multiple PA extracts are running. And my CPU, memory and disk resources do not look like a lot of extracts are running.

      I’m using PA 2022 Standard version 21.00.18 on Windows 11 Pro version 10.0.22621 Build 22621.

      Tech Support
    • Functions in Windows 11 Context Menu don't work in some directories

      P

      In the latest version of PA, on W11 (latest build/SP) when you try to use the first level context menu - NOTHING HAPPENS (particularly when you do this from Downloads or Documents folders) - however I noticed that it DOES WORK when you use the context menu from the Desktop. Going to the second level context menu does work however.

      Tech Support
    • PA 2023 Preview versus PA2022

      pirrbe

      Is the version Preview 2023 also considered to be tested by the testteam ? In the past we got messages in the forum for testing out version x.x, to be downloaded by fastring, or I missed the one for 2023. (I discovered 2023 on the official web…)
      CU, Pirrbe

      .

      Tech Support
    • Missing virtual driver in Patchbeam

      pirrbe

      PA 2023 22.00.08
      Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
      Virtual driver PA 2023-01-28 152607.png
      It seems a standard problem with new releases :-)
      Can I have a link or can it be fixed. Thank you. CU later

      Tech Support
    • How to get a registering code?

      N

      Hi there, been a user since 13 years now and in past whenever I had a problem or question I could email, however since 3 weeks it seems like everybody is dead?

      Anyway, as kind of a last resort, I post this email a 4th time but in this forum instead now, in the hope for help:
      "This is the 3rd time I am emailing you guys as I am missing a working code for the preview of Power Archiver 2023

      Can you please help me? I am a 13 years lasting customer of yours, and I am shocked thatr for whatever reason my support tickets are ignored now, why?

      thanks in advance!
      All the best!
      Joerg"

      Tech Support
    • File Explorer Shell Extension crash on Junction

      W

      Re: Explorer.exe Crash on right click

      This appears to be happening again with the Power Archiver 2022 shell extensions.

      When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.

      I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).

      Tech Support
    • PA 21.00.18 Action / Test behaves oddly for me on .PA files

      Brian Gregory

      PA 21.00.18 running on Windows 7 64 bit.
      I made a big .PA file and thought I’d check it was made correctly with Menu / Actions / Test.
      Discovered:
      a) PA always issues a UAC prompt to do this!
      b) PA always says there are many errors in PA files.

      Tech Support
    • PA 21.00.18 testing via context menu causes extraction of files

      D

      When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.

      The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.

      The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.

      Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.

      The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.

      The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.

      Tech Support

    12.00.49 Bug report

    Tech Support
    3
    22
    6874
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • drteeth
      drteeth last edited by

      I can reproduce this.

      Open archive, click on extract, and try to click on the drop down MRU box. PA locks for 5-10 secs, then a black rectangle appears for a further 5-10 secs - it is the shape and size of the expected MRU list. Then the list appears and the rest of the extract box disappears. One is then left with the PA window with the extract box hidden underneath it.

      The previous version (RC3?) worked fine, my 12.00.49 on my netbook is unaffected, just my main PC.

      Patchbeam reported the update as the release version, but RC4 is available on the site. I need the previous version to be able to use PA again. Please let me know where I can get it from.

      Tnx.

      Guy

      1 Reply Last reply Reply Quote 0
      • S
        Socrates Banned last edited by

        I cannot reproduce this on either my desktop or laptop. Makes me think something else is clashing with this feature.

        drteeth 1 Reply Last reply Reply Quote 0
        • drteeth
          drteeth @Socrates last edited by

          @Socrates:

          I cannot reproduce this on either my desktop or laptop. Makes me think something else is clashing with this feature.

          Since rebooting this PC for something else, all is well. None of my other PCs (3) had this issue at all. Cancel the brown trousers <g>!

          Guy</g>

          1 Reply Last reply Reply Quote 0
          • spwolf
            spwolf conexware last edited by

            what AV do you use?

            1 Reply Last reply Reply Quote 0
            • spwolf
              spwolf conexware last edited by

              we didnt do any changes that would cause this function to behave differently… but you never know… and also since we recompiled, some AV might have reset their pa.exe whitelist.

              someone reporting PA starting slowly, but that also happened only once.

              1 Reply Last reply Reply Quote 0
              • drteeth
                drteeth last edited by

                I use eset NOD 32. As I said, all is well after a reboot…damn computers making me look like a schmendrick<g>. very strange.

                guy</g>

                drteeth 1 Reply Last reply Reply Quote 0
                • drteeth
                  drteeth @drteeth last edited by

                  This post is deleted!
                  1 Reply Last reply Reply Quote 0
                  • drteeth
                    drteeth last edited by

                    Had to go back to 12.00.41 (RC3) as RC4 is totally unusable. So far, RC3 is okay. I did notice, with RC4, it took noticeably longer to the extract dialogue to appear after pressing ‘extract’ than with RC3.

                    Guy

                    1 Reply Last reply Reply Quote 0
                    • spwolf
                      spwolf conexware last edited by

                      so what happens? What OS?

                      drteeth 1 Reply Last reply Reply Quote 0
                      • spwolf
                        spwolf conexware last edited by

                        maybe save your settings and send it over to us via support at conexware dot com. So we can try exactly the same settings.

                        And this happens only with extract window location MRU?

                        drteeth 1 Reply Last reply Reply Quote 0
                        • spwolf
                          spwolf conexware last edited by

                          also that suggests that MRU had some specific folder that for some reason PA did not like… do you use maybe network folders, network drives, removable drives, etc? anything similar that would cause you to think about?

                          drteeth 1 Reply Last reply Reply Quote 0
                          • drteeth
                            drteeth @spwolf last edited by

                            @spwolf:

                            so what happens? What OS?

                            Same as in my original message, Win 7 32 bit.

                            Guy

                            1 Reply Last reply Reply Quote 0
                            • drteeth
                              drteeth @spwolf last edited by

                              @spwolf:

                              maybe save your settings and send it over to us via support at conexware dot com. So we can try exactly the same settings.

                              And this happens only with extract window location MRU?

                              Yes. All settings have been deleted as I could not do in inplace downgrade…had to manually uninstall first.

                              Guy

                              1 Reply Last reply Reply Quote 0
                              • drteeth
                                drteeth @spwolf last edited by

                                @spwolf:

                                also that suggests that MRU had some specific folder that for some reason PA did not like… do you use maybe network folders, network drives, removable drives, etc? anything similar that would cause you to think about?

                                I thought of that but one moment RC3 was working, the next RC4 was not. Also, RC4 seemed to work one minute and not the next - the change happening after a reboot.

                                I have just ‘patchbeamed’ my RC3 to RC4 and all is well so far. MRU is empty so far and I’ll do some experimenting later.

                                Thanks

                                Guy

                                1 Reply Last reply Reply Quote 0
                                • spwolf
                                  spwolf conexware last edited by

                                  just save that mru so we will see when it happens again… it happens only with the mru there, right?

                                  1 Reply Last reply Reply Quote 0
                                  • drteeth
                                    drteeth last edited by

                                    The problem is apparent the moment I click ‘extract’ as there is a delay before the dialogue box appears.

                                    Only one setup has been affected, it is okay so far, will update if it occurs. Please let me know of the location where the MRU is stored.

                                    Cheers

                                    Guy

                                    1 Reply Last reply Reply Quote 0
                                    • spwolf
                                      spwolf conexware last edited by

                                      just use options> save settings to a file… and send it over…

                                      that way we have everything in case it is connected to another option as well.

                                      1 Reply Last reply Reply Quote 0
                                      • drteeth
                                        drteeth last edited by

                                        Will do.

                                        Guy

                                        1 Reply Last reply Reply Quote 0
                                        • spwolf
                                          spwolf conexware last edited by

                                          did you get it happen again?

                                          1 Reply Last reply Reply Quote 0
                                          • drteeth
                                            drteeth last edited by

                                            Hi,

                                            No I did not…sorry for not posing earlier. I deliberately set a folder to my external drive in the MRU and them turned off that drive…no problems.

                                            I’ll keep monitoring…

                                            regards

                                            guy

                                            1 Reply Last reply Reply Quote 0
                                            • spwolf
                                              spwolf conexware last edited by

                                              patchbeam to .50.

                                              We made some changes which we thought could optimize this… but we couldnt reproduce it, so it might or might not help :-)

                                              drteeth 1 Reply Last reply Reply Quote 0
                                              • drteeth
                                                drteeth @spwolf last edited by

                                                @spwolf:

                                                patchbeam to .50.

                                                We made some changes which we thought could optimize this… but we couldnt reproduce it, so it might or might not help :-)

                                                Thanks. I cannot reproduce it now either (before the update) ;).

                                                Regards

                                                DrT

                                                1 Reply Last reply Reply Quote 0
                                                • First post
                                                  Last post