-
PA2023 Win10, (same problem with older releases but never reported)
PA Soft is installed on partition D. (exclusive for installed progs)
Then I created on my partition G: the folders as configured in PA Settings ‘Folders’.0fcf1b09-1b91-4b74-b250-f8cf908a3348-Ashampoo_Snap_maandag 20 maart 2023_11h54m34s.png
Screenshot 2023-03-20 121152.png
The problem : Any activity on PA is saved in these folders…
PA ignores them and still use the default settings. Whats wrong ? Regards, Pirrbe -
I am still using Powerarchiver 2022 and it does not show pdf markups in the preview. Is there a setting to get version 2022 to show pdf markups in the preview? If not, does this work in version 2023?
-
The question that I have about PA archives is what happens if say ConeXware, as a company, dies in the future? What happens to any PA files that are created today? Can these files be decompressed with a copy of a PowerArchiver that can no longer phone home to the mothership thus can’t be registered or activated?
I mean, I can understand that new PA files wouldn’t be able to be created if the program isn’t registered but what about an un-registered copy because well, the question that I posed above?
It’s questions like this that make me not want to store anything really valuable in PA files out of fear that I, at some point in the future, might lose access to said data inside those files. OK, 7ZIP might not be able to compress as heavily as PA but at least it’s open source and any 7ZIP files will still be able to be read and decompressed ten, twenty, or fifty years from now.
-
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
-
Is this a known problem? Is there a fix coming? This is a primary reason I buy PA.
I’ve tried both methods I know to extract multiple zips at the same time. 1) Multi Extract feature in the GUI. 2) In Windows File Explorer, select multiple zips, right click, use PA context menu to Extract or Extract To…
Is there a setting I missed? Or maybe it really is processing in parallel, but I can’t detect it? Nothing tells me in the Processes in Task Manager that multiple PA extracts are running. And my CPU, memory and disk resources do not look like a lot of extracts are running.
I’m using PA 2022 Standard version 21.00.18 on Windows 11 Pro version 10.0.22621 Build 22621.
-
In the latest version of PA, on W11 (latest build/SP) when you try to use the first level context menu - NOTHING HAPPENS (particularly when you do this from Downloads or Documents folders) - however I noticed that it DOES WORK when you use the context menu from the Desktop. Going to the second level context menu does work however.
-
-
PA 2023 22.00.08
Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
Virtual driver PA 2023-01-28 152607.png
It seems a standard problem with new releases :-)
Can I have a link or can it be fixed. Thank you. CU later -
Hi there, been a user since 13 years now and in past whenever I had a problem or question I could email, however since 3 weeks it seems like everybody is dead?
Anyway, as kind of a last resort, I post this email a 4th time but in this forum instead now, in the hope for help:
"This is the 3rd time I am emailing you guys as I am missing a working code for the preview of Power Archiver 2023Can you please help me? I am a 13 years lasting customer of yours, and I am shocked thatr for whatever reason my support tickets are ignored now, why?
thanks in advance!
All the best!
Joerg" -
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
-
When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.
The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.
The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.
Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.
The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.
The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.
PA can't extract; XXX does…#2
-
#1 is here:
http://www.powerarchiver.com/forums/showthread.php?t=331I’m using the latest version of PA: 9.10.06
download this file:
http://www.mlin.net/files/Clipomatic20.zip [96KB]then uncompress it, you’ll have another file named Clipomatic.EXE [111KB]; it’s a self-extracting ZIP archive.
try to extract it with PowerArchiver…it will fail: “Error reading ZIP file” :(
use WinR**, it will extract it smoothly…what’s the problem, this time?
check and fix it, mates! :) -
Hi,
this file is badly created ZIP SFX, and is out of spec. As discussed before, zip engine (dynazip) hates zip files with bad headers.
Zip repair tool works fine on this file and will help you to recreate an proper zip archive out of it!
thanks,
-
got that.
let me say that the normal user, who doesn’t come to this forum nor knows of its existence…how can he imagine about the bad header-thing?
he will just see that WinR** works, PA does not…
-
I hope there are few other things that PA does and other dont :-).
We cant do anything with badly created zip archives except provide the tool that fixes them and we do and it does, so it works :-).
thanks and have happy holidays!
-
I hope there are few other things that PA does and other dont :-).
We cant do anything with badly created zip archives except provide the tool that fixes them and we do and it does, so it works :-).
thanks and have happy holidays!
I think I have a good idea: I could not think about trying to correct the zip file via the proper tool of PA…why don’t you create a visual hint for that?
for example, when the error win pops up, it could go “error reading zip file. try correcting it via the Repair Archive tool” (something like that)
what do you think?
-
Good idea.
-
Good idea.
I’m happy you like it! :)
btw, I have updated to 9.11.01…and now PA correctly extracts the file! so…how’s that, if you changed nothing about the handling of bad headers?
-
Hi,
this file is badly created ZIP SFX, and is out of spec. As discussed before, zip engine (dynazip) hates zip files with bad headers.
Zip repair tool works fine on this file and will help you to recreate an proper zip archive out of it!
thanks,
The ZIP repairing tool works good BUT… you’ll first have to rename Clipomatic.EXE to clipomatic.zip for it to work on the file.
In fact, the ZIP repairing tool doesn’t allow you to choose anything else than ZIP files.
It would be good if it could directly get exe sfx files as well…what do you think?
(I think I’m going to put it in the wishlist as well…)
-
You just enter . into the filename field and it will show you all the files in that folder, if you select that SFX archive, it will “fix it” even if it is an EXE.
Problem with putting general “*.exe” in there is that, obviously, it would show both SFX archives and all other EXE files. While you might know the difference, an average user might not :-).
thanks,
-
You just enter . into the filename field and it will show you all the files in that folder, if you select that SFX archive, it will “fix it” even if it is an EXE.
Problem with putting general “*.exe” in there is that, obviously, it would show both SFX archives and all other EXE files. While you might know the difference, an average user might not :-).
thanks,
right, but the average user would never guess to put the . to be shown all files…I guess I’m more than an average user, but I couldn’t think of that simple trick! the normal user should be assisted in the largest way, I believe…
and don’t forget that the tool’s named “Zip repair”…so one can’t promptly guess that it can be useful also with exe sfx archives…