-
PA2023 Win10, (same problem with older releases but never reported)
PA Soft is installed on partition D. (exclusive for installed progs)
Then I created on my partition G: the folders as configured in PA Settings ‘Folders’.0fcf1b09-1b91-4b74-b250-f8cf908a3348-Ashampoo_Snap_maandag 20 maart 2023_11h54m34s.png
Screenshot 2023-03-20 121152.png
The problem : Any activity on PA is saved in these folders…
PA ignores them and still use the default settings. Whats wrong ? Regards, Pirrbe -
I am still using Powerarchiver 2022 and it does not show pdf markups in the preview. Is there a setting to get version 2022 to show pdf markups in the preview? If not, does this work in version 2023?
-
The question that I have about PA archives is what happens if say ConeXware, as a company, dies in the future? What happens to any PA files that are created today? Can these files be decompressed with a copy of a PowerArchiver that can no longer phone home to the mothership thus can’t be registered or activated?
I mean, I can understand that new PA files wouldn’t be able to be created if the program isn’t registered but what about an un-registered copy because well, the question that I posed above?
It’s questions like this that make me not want to store anything really valuable in PA files out of fear that I, at some point in the future, might lose access to said data inside those files. OK, 7ZIP might not be able to compress as heavily as PA but at least it’s open source and any 7ZIP files will still be able to be read and decompressed ten, twenty, or fifty years from now.
-
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
-
Is this a known problem? Is there a fix coming? This is a primary reason I buy PA.
I’ve tried both methods I know to extract multiple zips at the same time. 1) Multi Extract feature in the GUI. 2) In Windows File Explorer, select multiple zips, right click, use PA context menu to Extract or Extract To…
Is there a setting I missed? Or maybe it really is processing in parallel, but I can’t detect it? Nothing tells me in the Processes in Task Manager that multiple PA extracts are running. And my CPU, memory and disk resources do not look like a lot of extracts are running.
I’m using PA 2022 Standard version 21.00.18 on Windows 11 Pro version 10.0.22621 Build 22621.
-
In the latest version of PA, on W11 (latest build/SP) when you try to use the first level context menu - NOTHING HAPPENS (particularly when you do this from Downloads or Documents folders) - however I noticed that it DOES WORK when you use the context menu from the Desktop. Going to the second level context menu does work however.
-
-
PA 2023 22.00.08
Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
Virtual driver PA 2023-01-28 152607.png
It seems a standard problem with new releases :-)
Can I have a link or can it be fixed. Thank you. CU later -
Hi there, been a user since 13 years now and in past whenever I had a problem or question I could email, however since 3 weeks it seems like everybody is dead?
Anyway, as kind of a last resort, I post this email a 4th time but in this forum instead now, in the hope for help:
"This is the 3rd time I am emailing you guys as I am missing a working code for the preview of Power Archiver 2023Can you please help me? I am a 13 years lasting customer of yours, and I am shocked thatr for whatever reason my support tickets are ignored now, why?
thanks in advance!
All the best!
Joerg" -
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
-
When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.
The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.
The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.
Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.
The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.
The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.
7-zip date of extracted files
-
Using latest PowerArchiver 11.62.03 to extract 7z archives all files have the time as extraction as last modified time.
I don’t have this issue with zip and rar files. I’m using Windows XP SP3. -
Hi!
I’m using PowerArchiver 11.62.04 in Windows XP SP3 and I almost got the same result as you do.Extraction of 7z archives
Created and Modified date is set as the date and time of extraction
Extraction of zip archives
Created date is set as the same date as Modified date when the file is extracted. When I compare it with the original file, the created date is changed and set as the same date as modified date.
Kind Regards
Micke -
The only thing I get is that the date created is the date when extracted. Date modified stays ok.
anyone else?
-
Using PA to create 7z and then extract I do get the dates changed. After extracting both modified and created are set to today.
-
I recently noticed the same behavior. However, unless I am mistaken, this is of fairly recent vintage (I an currently running the latest posted version).
I do not believe that this was PA’s behavior late last year – and perhaps even earlier this year. I am confident that I would have noticed it.
-
Hi!
It looks like me, the thread starter and TBGBe all get the same result when extracting 7z archives. The other common thing is that all 3 of us are running Windows XP with Sp3. It would be interesting to know if someone that’s running Vista or Win7 could reproduce this.Kind Regards
Micke -
happens on W7 too. so it’s not related to OS
-
Even with zipx archives, the CREATION date reflects when the file was extracted, although the MODIFIED date is correct (it is the same date as the file that was added to the archive).
In contrast, with Winzip, both the creation and modifed date remain as they were when the archive was created, although the extracted file does show that the file was ACCESSED when it was extracted.
-
I recently noticed the same behavior. However, unless I am mistaken, this is of fairly recent vintage (I an currently running the latest posted version).
I do not believe that this was PA’s behavior late last year – and perhaps even earlier this year. I am confident that I would have noticed it.
it might be “recent” only if you were using old version before ;-). We will be checking it out in the future.
-
I could be mistaken, of course. However, I am reasonably confident that I would have noticed this behavior had PA been doing this for the past year.
So I would have thought that in 11.5 – or even the original 11.6 – that this was not the regular behavior.
I might well have some earlier versions around. If I do, perhaps I will try them and report back.
-
Check this version:
http://fileforum.betanews.com/detail/PowerArchiver_2010-Free/952395111/4Seems to work fine here.
-
Yes spwolf just installed through your provided link and its working fine now.