-
PA2023 Win10, (same problem with older releases but never reported)
PA Soft is installed on partition D. (exclusive for installed progs)
Then I created on my partition G: the folders as configured in PA Settings ‘Folders’.0fcf1b09-1b91-4b74-b250-f8cf908a3348-Ashampoo_Snap_maandag 20 maart 2023_11h54m34s.png
Screenshot 2023-03-20 121152.png
The problem : Any activity on PA is saved in these folders…
PA ignores them and still use the default settings. Whats wrong ? Regards, Pirrbe -
I am still using Powerarchiver 2022 and it does not show pdf markups in the preview. Is there a setting to get version 2022 to show pdf markups in the preview? If not, does this work in version 2023?
-
The question that I have about PA archives is what happens if say ConeXware, as a company, dies in the future? What happens to any PA files that are created today? Can these files be decompressed with a copy of a PowerArchiver that can no longer phone home to the mothership thus can’t be registered or activated?
I mean, I can understand that new PA files wouldn’t be able to be created if the program isn’t registered but what about an un-registered copy because well, the question that I posed above?
It’s questions like this that make me not want to store anything really valuable in PA files out of fear that I, at some point in the future, might lose access to said data inside those files. OK, 7ZIP might not be able to compress as heavily as PA but at least it’s open source and any 7ZIP files will still be able to be read and decompressed ten, twenty, or fifty years from now.
-
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
-
Is this a known problem? Is there a fix coming? This is a primary reason I buy PA.
I’ve tried both methods I know to extract multiple zips at the same time. 1) Multi Extract feature in the GUI. 2) In Windows File Explorer, select multiple zips, right click, use PA context menu to Extract or Extract To…
Is there a setting I missed? Or maybe it really is processing in parallel, but I can’t detect it? Nothing tells me in the Processes in Task Manager that multiple PA extracts are running. And my CPU, memory and disk resources do not look like a lot of extracts are running.
I’m using PA 2022 Standard version 21.00.18 on Windows 11 Pro version 10.0.22621 Build 22621.
-
In the latest version of PA, on W11 (latest build/SP) when you try to use the first level context menu - NOTHING HAPPENS (particularly when you do this from Downloads or Documents folders) - however I noticed that it DOES WORK when you use the context menu from the Desktop. Going to the second level context menu does work however.
-
-
PA 2023 22.00.08
Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
Virtual driver PA 2023-01-28 152607.png
It seems a standard problem with new releases :-)
Can I have a link or can it be fixed. Thank you. CU later -
Hi there, been a user since 13 years now and in past whenever I had a problem or question I could email, however since 3 weeks it seems like everybody is dead?
Anyway, as kind of a last resort, I post this email a 4th time but in this forum instead now, in the hope for help:
"This is the 3rd time I am emailing you guys as I am missing a working code for the preview of Power Archiver 2023Can you please help me? I am a 13 years lasting customer of yours, and I am shocked thatr for whatever reason my support tickets are ignored now, why?
thanks in advance!
All the best!
Joerg" -
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
-
When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.
The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.
The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.
Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.
The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.
The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.
Settings lost
-
I just installed 11.60.08 via the automatic updater. After installing, I noticed my settings under Configuration > Folders and Configuration > Locations had been reset to the defaults.
I don’t check those settings frequently, so I don’t really know if the installer screwed them up, or if it happened some other time.
I just did a repair install of PA and the settings weren’t wiped out. I don’t know what to tell you but I thought I’d report it, even if this report sucks.
-
We had to change how some values are stored so they would work in non-english systems, hence few old registry keys were not carried over into 11.60.
-
It doesn’t suck. I can confirm, just did automatic upgrade and whole configuration got screwed up->PA doesn’t even work now. Trying to fix, will report more.
-
OK, here we go. After autoupdate, when PA was supposed to start, I got “Invalid cursor handle” error, followed by exception. Happend for the first time after years with PA, so I was so surprised, I didn’t make a note of it, sorry. PA started anyway but apparently very ill. All UI elements were displayed at once, with everything contained in one window frame (I mean, ribbon was INSIDE of the window, not part of the frame). I downloaded manualy setup again, made repair install and PA started with everything in default (what a pain to set it up again:(). Now it appears to run properly.
-
ah, too bad you did anything… it would have helped if you had saved your registry key so we can indentify those keys making trouble…
what language version are you using?
-
Sorry but I desparately needed to unpack some files. I spent last few hours trying to unrar some archives which are most probably alright but still I’m getting CRC error.:confused: That’s actually why I did upgrade.
I’m using english PA on english W7RCx64 (which probably isn’t supported by PA, I wouldn’t be surprised). -
I can’t open preview sidebar now (buttons react but no window is displayed) and headers after some resizing can get frozen and PA has to be restarted to make them changeable again. Modern black skin, viewing style Explorer with folders. Also taskbar progress in W7 doesn’t work (it used to, atl. sometimes).
After the update went wrong before, also registration information disappeared if it is of any importance. Looks to me like whole PA reg. hive got corrupted. -
@Ren:
I can’t open preview sidebar now (buttons react but no window is displayed) and headers after some resizing can get frozen and PA has to be restarted to make them changeable again. Modern black skin, viewing style Explorer with folders. Also taskbar progress in W7 doesn’t work (it used to, atl. sometimes).
After the update went wrong before, also registration information disappeared if it is of any importance. Looks to me like whole PA reg. hive got corrupted.ok, save your HKCU\Software\PowerArchiver to reg file and send it over to us (zip it) to support @ conexware . com.
It has nothing to do with unraring or taskbar progress though…
-
ok, save your HKCU\Software\PowerArchiver to reg file and send it over to us (zip it) to support @ conexware . com.
It has nothing to do with unraring or taskbar progress though…
thanks, got the preview button issue
-
Cool, you’re welcome. That was quick. :)
-
hopefully if someone else gets the other issue they will email us first :-).
p.s. no need to reinstall in the future, just use “reset to default” option under Options…
-
(even now it will fix that issue with the preview)
-
Will do that. Thanks a lot for help!
-
We improved this in the future so first time, these old entries are copied (for future upgraders to 11.6)… :).
thank you…
-
You’re welcome. That’s even better than warrning or someting, great job!