Hello!
I’ve just created SFX-Archives both from ZIP and 7z-Archives and none has an Icon as it seems.
I use the new version 22.00.11.
Zwischenablage_10-22-2024_01.jpg
Basically I used powerarchiver context menus to zip up a folder then i used windows 11 own built in zip extractor via the context menu to extract all and this is where it throw up a fault. , I’m using windows 11 .
The file that was a problem in the zip that windows 11 could not extract was iva “babe” cotton.jpg
I know it has non standard quotes in it.
However I had winrar on the computer and tried the exact same method with their context menu compress to zip and then I extracted the file with windows own extract all context menu and it had no problems. This indicates that powerarchiver is doing something different with iva “babe” cotton.jpg compressing to zip.
Then I changed iva “babe” cotton.jpg to iva babe cotton.jpg and compressed it with powerarchiver and then tried it with windows 11 extract all and had no problems. It looks like powerarchiver is doing something to that one file that has quotes in it.
Please note that powerarchiver extracted both zip files with no problems, only windows built in zip extraction had the fault. Reason I’m letting people know in case they send zip files with special characters in files names to people who do not have powerarchiver.
When will a fix be implemented?
On installing the program I am getting the error message:
"Unable to execute file c:\Program Files\PowerArchiver\pashutil.exe
CreateProcess failed: code 2
The system cannot find the file specified"
This can’t be right!
I am using the latest official build of Windows 11
Buttons are not properly aligned on About screen.
about window.png
Buttons not aligned on configuration window.
configbuttons.png
New version:
PowerArchiver 2023 - 22.00.10:
Download:
https://u.powerarchiver.com/pa2023/powarc220010.exe
New build for some bug fixes and issues - full list to come with new update. Please test and see if you have any issues.
Thanks everyone for your assistance!
New version:
PowerArchiver 2023 - 22.00.11:
Download:
https://u.powerarchiver.com/pa2023/powarc220011.exe
New build for some bug fixes and issues - full list to come with new update. Please test and see if you have any issues.
Thanks everyone for your assistance!
Just tried using the Modern (Windows 10) Icon set and seeing a few missing icons in both PowerArchiver Burner and PowerArchiver Encryption screens . They are all there in the Minimalistik icon set and the only difference I can see is the former is blue and the latter grey. In version 22.00.9
powerarc_2023-09-18_17-00-19.png
powerarc_2023-09-18_17-01-05.png
Hi everyone, some good news about PowerArchiver… I’ve managed to get in touch with the original developer of PowerArchiver, Ivan Petrovic, and he has confirmed that the product is not dead or abandoned, in fact it is still very much alive! There has been a hiatus over the past months for various reasons, but that we should expect to see stuff coming through in the coming months (hopefully the next 2 months).
I had a large .tar file (a backed up WSL) and I want to delete a few directories and their contents from it using PA2023.
PA just destroys the whole archive as soon as I try to delete a directory, leaving it in a state where PA2023 won’t even open it any more.
I tried several times and also tried compressing it to .tar.xz instead - same result.
This should either actually work, or it should say operation not supported and do nothing.
Hello!
The regular version of PA 2023 is out for over 6 months now, but there is still no sign of the portable release.
(When) will there be one?
Thanks!
Hello!
Is there currently no portable version of PA2023 available?
(When) do you plan to release one?
Thanks!
Win 11 64 bit
I have some archives which have been encrypted, using the encrypt option either in pbs or when interactively creating a zip. When I open these, and look at files, I am asked for passwords, which I know, and then can view items or decrypt the files in the archive (tools>decrypt files).
However, when I use the Actions>Remove Archive Encryption (whether using the same zip or asking to write another), the routine shows progress bar to the end, but then just hangs i.e. “OK” never activates. All process information shows this stalled/hanging.
What can I do to sort this out?
For example:
Download this ZIP file: http://dslstats.me.uk/files/dslstats32W-6.5.zip
Everything in the ZIP file is in a directory “dslstats32W-6.5”.
However when I extract using right click “Extract Here” the name of the directory created is “2W-6.5” !
I am running PA 22.00.09 on Windows 11. I have seen the same happen with some other kinds of archive too.
If I compress a folder to a .pa using right click, Compress to folder.pa and use the new Windows 11 menu then the Options, Configuration, Miscellaneous, Use normal relative path setting is always enabled.
But I like this option disabled so I have to use the old style menu in order to get PA to compress a folder in the way I wish.
PA 22.00.09
344c6c52-f03f-407b-ad76-8130b31936bb-image.png
Slow startup under Windows 7
-
I am experiencing a very slow PowerArchiver (latest version) startup, under Windows 7 64-bit. The issue is sporadic. It seems that once PowerArchiver loads (after a several second delay), then I no longer have the problem (at least for a while).
This isn’t a normal slow-program startup. My system is running super fast and I don’t have this issue with any other programs. I’m running ESET Antivirus, but I don’t think this is the cause since, as I say, after the first PowerArchiver load, it loads new ZIP files very quickly.
The startup speed doesn’t seem to be related to the size of the ZIP files. It appears to be PowerArchiver itself which is slow to start for the first time.
Any ideas?
Thanks!
-
Hi Logidelic,
Your 100% correct that doesnt sound rite. I sometimes have a slow start up on the 1st fresh boot but after that everything runs smoothly.
Can you share your system specs?
This is something i would do;
1. Uninstall PowerArchiver including Patchbeam and the Virtual Driver.
2. If you have any system cleaning products on your computer such as ccleaner do a full clean including registry, then reboot your system.
3. Then download the latest version and install again.
Dont forget to backup your current configuration for PA , But on install “dont” import them untill you have tested the speed on a fresh install.
See if you notice a difference on a complete fresh install without any personal configurations.
After than then configure your product, personally i would do this from scratch.
I know this sounds like a pain in the backside, but it will help us establish multiple area’s such as is it an upgrade issue, background tasking, registry issues, computer resource etc
Thanks.
-
First impression after uninstalling and re-installing is that it solved the problem! Seems weird to me, since the system was very clean and there was no reason for a dirty install, but there you have it.
This is just after two tries, so will followup further if I notice anything new.
Thank you!
-
maybe some setting? If it happens again, try saving config via Options and see if setting defaults help.
-
First impression after uninstalling and re-installing is that it solved the problem! Seems weird to me, since the system was very clean and there was no reason for a dirty install, but there you have it.
This is just after two tries, so will followup further if I notice anything new.
Thank you!
Your welcome! It has happened from time to time , but you can almost resolve every PA issue with a clean install.
Like Spwolf suggested, if this happens again send the guys at support the specs, and a copy of your config. This can aid them further.
-
Just an update: Unfortunately I spoke too soon. Seems like it didn’t really change anything afterall. I will send my config to support as suggested, but just a few more clues:
- After a slow startup, PowerArchiver will start very quickly at subsequent starts, BUT….
- This only lasts for an unexplained amount of time. For example the next day (no reboot!) I’ll have the exact same problem again.
- When the startup is slow, it’s close to 15 seconds before PowerArchiver shows up. This happens no matter how I bring up the UI (ex. right-click on a file and choose Extract Here… 15 seconds before it starts)
-
it looks like some antivirus thing - can you Please try uninstalling Antivirus you use, and then reboot computer and try extract here for instance… shell should always be instantly started (or close to it).
thank you and I am sorry for the issue you are experiencing…
-
problem is that you cant just disable any AV, it still works, so only way to test for sure is to remove and try without it….
-
since someone has reported something similar now with Avast, please let us know if disabling ESET works or uninstalling (you can install later)… that way we can report it to ESET.
there might be some virus that had start of file signature similar to pa.exe and hence now they auto check pa.exe due to bad flag setting. This happens every 3-4 years and we report it to them and they fix that flag so it doesnt happen.
-
gonna try this out with these 2 anti virus programs and see if can get the same slow startup time
-
Tried this with Eset Antivirus version 6.0.314.0
Virus definitions: 8164Worked fine, starts as usual.
I noticed that the startup time was very slow when Eset was doing it’s Quick Scan.
Is it possible that a quick scan or any scan was being performed at the time of your attempted start of PowerArchiver?Go ahead and send over your reg settings (zipped) to support and I can take a look while I still have Eset installed.
And try to reproduce with your exact settings.Thanks!