BETA: PowerArchiver 2023 - 22.10.02

[davidsplash]

can you try and use revo uninstall to completely uninstall powerarchiver you can download it from the internet it might be a left over registry entry causing the fault.

then again can you disable all but essential processes/ programs open and then run powerarchiver. it might be a specific program that is cconflicting with powerarchiver. you sure you have the latest release?

Can you make sure it is a clean install of the registry (all powerarchiver entries not in there). What programs do you have installed on your pc?

what antivirus/spyware/ firewall do you use that could cause conflict.

it could also be that the file is having problems exiting as it is being used by windows for some reason. can you let us know where your temp file is situated the folder where your powerarchiver uses as temp folder for opening files is. this could be part of the reason as well. Have you checked for registry errors to see if you have problems there?

hope it gets resolved for you soon.

It could also indicate faulty memory/ or hardware in a computer. As it is just you reporting this and noone else. I have seen this fault with only one other product ultimatezip. I have fully tested this program in xp and can not replicate your fault. Can you please list memory and hardware and what is open when the crash happens and any message about the crash so we can diagnose this fault/crash better.

[PA_Fan]

In answer but not necessarily in order.

1. release is 11.00.76 Pro
2. AV etc is the same as I have been using with earlier versions of PA without problem. They are Avast (AV), Comodo Firewall, Windows Defender. There are other things but they are non-resident.
3. There are no hardware errors on this Dell 9100 with 3gb running XP Pro SP3.
4. I have run a couple of registry checks and there are no errors specific to PA.
5. Temp file is the usual default but I’ll put it somewhere on its own just in case.
6. Nothing is running on here that hasn’t run with PA in earlier editions.

I can send a copy of the error log to you if you would like it.

As far as full uninstall goes, I will download the REVO utility and follow your suggestions. As I mentioned earlier, a “phantom” PA 2007 was reported in Add/Rem. Progs, but this has now disappeared.

Incidentally, using non-solid 7-zips make no difference.

[spwolf]

so same thing happens if you update non solid 7zip? You get crash on exit?

thanks,

[PA_Fan]

spwolf,

I dumped a couple of zip contents (quite big zips) and reloaded them into nonsolid 7zip tests. Then I deleted files etc. and exited. It doesn’t post-exit crash as often the same way as zips seem to. What does happen is this:-

1. Open 7zs one after the other, delete some files etc.
2. Try to open another one, and PA screen remains blank, message “No files or folders selected” at bottom. Also action toolbar buttons greyed out.
3. Try another arc (zip or 7z) and same happens.
4. Exit, PA closes (i.e. desktop only visible) then I get the App error message.

I have also followed previous advice; namely, I have revo uninstalled PA, checked registry etc. and then reinstalled it. This doesn’t seem to affect. I have also run all possible hardware checks and no errors reported.

I’ve also tried with and without reuse PA windows, and with PAstarter on and off - no discernible difference.

[spwolf]

how are you opening those 7z one after another, via Open button?

Does the error at exit happen when you use 7zips only?

[PA_Fan]

I’ve opened them from both Open button and recent files list.

Post exit crash happens with zips and 7zs. I don’t have any other archive types but I guess I could create a few test ones.

If I open zips quickly one after the other, I sometimes get a freeze-up. When this happens, PA is unresponsive and has to be killed, and other times it is possible to exit, and then the crash happens.

There is 3gb RAM on this machine, and pagefiles spread over 2 drives are enormous - so I can’t see it being a resource-caused problem.

[spwolf]

but it happens when you are handling ONLY 7zips.

I am making sure you are not also opening zips at the same time.

I want to know if problem is specific to zip engine, or maybe to some GUI issue.

[PA_Fan]

SPWOLF

Just done some more testing.

1. 3 x 7z archives. Start PA, open each in turn (no actions). reiterate several times, exit - no error.
2. Same thing but with zips (some containing same files as 7zip) - open in turn, again and again, then exit. Post exit - error occurs.

Additional

There doesn’t seem to be a problem with zips if I open one, work on it and then exit PA. Things start going wrong when zips are opened consecutively (not necessarily worked on, just opened).

[PA_Fan]

The Dr Watson log gives the error as a c0000005 (access violation) error.

In the process listing, 2 PIDs are shown as Error 0xD0000022. Both of these are Comodo firewall - one the service and the other the programme.

I will try running without these to see if this does any good.

[PA_Fan]

I have tried running without Comodo services and app, plus some other things that could cause problems, but it makes no difference i.e. still on exit crashes.

Using the modern skin, if I open a first zip I get a normal screen. If I then open a 2nd zip, the second display is corrupt, with two occurrences of the “Standard” box in the toolbar. It is then possible to sometimes exit (and get crash) or perhaps abort with Task Manager and maybe then get the error. I have tried all the skins, and the problem is the same. I have screenshots of the different states but these are over the size limits even when zipped.

The error logs show access violation or stack overflow errors. I have again run all the memory tests and diagnostics but no problems.

[spwolf]

you can send us screenshots to our email address…

[TBGBe]

I have tried with zip files and can’t reproduce this.
Opening using button, using explorer filelist, using recent.
Closing or not closing zip before opening next.
Reuse windows or not active.

All OK.
I wonder if the size of the zips (number of files in filelist) is causing this - have you tried with small zips to check?
@PA_Fan:

Using the modern skin, if I open a first zip I get a normal screen. If I then open a 2nd zip, the second display is corrupt, with two occurrences of the “Standard” box in the toolbar.

Not sure what this Standard box is - do you mean the PA window title or something else?

[PA_Fan]

The zips are all different sizes from very small - 101kb- to 118,500KB.

I get this problem less if I open files from the recent list rather than opening the folder with the Open button.

After opening an archive, you have under Home the panels labelled Standard, Tools, Backup and Burner.

In the phenomenon I refer to (I have sent screenshots by email-support ticket 6971) the Tools panel becomes filled with most of the elements of the Standard panel (but in a corrupt way) i.e. the panels displayed are Standard (Corrupted), Standard (corrupted), Backup and Burner. At this point it either locks up and has to be killed (with an App Error) or sometimes the exits work and PA exits with an App error thereafter

[TBGBe]

Ok, so filelist is not a problem.
@PA_Fan:

After opening an archive, you have under Home the panels labelled Standard, Tools, Backup and Burner.

I understand what you are referring to now - the Ribbon.
However, I have that layout of the ribbon before opening an archive!
After opening it changes to Standard, Tools, File and File List.
Whereas Backup and Burner “move” under the Tools ribbon.

No other ideas, so let’s leave this with support (spwolf) now.

[PA_Fan]

I’ve now got PA 11.01.02 installed. However, this problem carries on happening, with the error being either a stack over flow or an access violation.

I’ve analyzed the Dr Watson dump with Win Debug, but without an inside knowledge of PA this doesn’t really help me.

I’m happy to send a copy of the .dmp file or of the Debug outputs if this will help anyone.

[spwolf]

@PA_Fan:

I’ve now got PA 11.01.02 installed. However, this problem carries on happening, with the error being either a stack over flow or an access violation.

I’ve analyzed the Dr Watson dump with Win Debug, but without an inside knowledge of PA this doesn’t really help me.

I’m happy to send a copy of the .dmp file or of the Debug outputs if this will help anyone.

i am sure you did already, but just to make sure - did you try deleting, manually, HKLM and HKCU\Software\PowerArchiver keys, and see if that makes any difference with completly default settings (do not change anything)…

[PA_Fan]

I did try this, plus a cleanup with the Revo uninstaller as suggested elsewhere.

I will try again.

However, on looking at the HKEY_Local_Machine\software keys, I notice that there isn’t an entry for Powerarchiver (keys go from Policies to Program Groups, no PA in between).

There is an HKEY_Current_User entry.

Is this significant?

[TBGBe]

Probably not - I don’t have a PowerArchiver (or Conexware) HKLM_Local_Machine\SOFTWARE key either.

Just HKeyUsers and HKCU.

[spwolf]

you shouldnt have one :-)

[PA_Fan]

I’ve Revo uninstalled PA, checked the registry to ensure all entries are gone (they are) and reinstalled and re-registered the latest version (11.01.02).
Beyond that I’ve done nothing else to change it (skins, prefs etc.)

I’ve then opened a lot of zips one after another, deleted some files from them, added some and so forth.

I have NOT had the “error on exit” with PA set up as delivered.

What do you suggest now? I could go through each customisation option one by one to see if any changes cause a recurrence of the errors, but I’m a bit short of time right now.

Please advise.