PA2023 Win10, (same problem with older releases but never reported)
PA Soft is installed on partition D. (exclusive for installed progs)
Then I created on my partition G: the folders as configured in PA Settings ‘Folders’.
0fcf1b09-1b91-4b74-b250-f8cf908a3348-Ashampoo_Snap_maandag 20 maart 2023_11h54m34s.png
Screenshot 2023-03-20 121152.png
The problem : Any activity on PA is saved in these folders…
PA ignores them and still use the default settings. Whats wrong ? Regards, Pirrbe
I am still using Powerarchiver 2022 and it does not show pdf markups in the preview. Is there a setting to get version 2022 to show pdf markups in the preview? If not, does this work in version 2023?
The question that I have about PA archives is what happens if say ConeXware, as a company, dies in the future? What happens to any PA files that are created today? Can these files be decompressed with a copy of a PowerArchiver that can no longer phone home to the mothership thus can’t be registered or activated?
I mean, I can understand that new PA files wouldn’t be able to be created if the program isn’t registered but what about an un-registered copy because well, the question that I posed above?
It’s questions like this that make me not want to store anything really valuable in PA files out of fear that I, at some point in the future, might lose access to said data inside those files. OK, 7ZIP might not be able to compress as heavily as PA but at least it’s open source and any 7ZIP files will still be able to be read and decompressed ten, twenty, or fifty years from now.
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
Is this a known problem? Is there a fix coming? This is a primary reason I buy PA.
I’ve tried both methods I know to extract multiple zips at the same time. 1) Multi Extract feature in the GUI. 2) In Windows File Explorer, select multiple zips, right click, use PA context menu to Extract or Extract To…
Is there a setting I missed? Or maybe it really is processing in parallel, but I can’t detect it? Nothing tells me in the Processes in Task Manager that multiple PA extracts are running. And my CPU, memory and disk resources do not look like a lot of extracts are running.
I’m using PA 2022 Standard version 21.00.18 on Windows 11 Pro version 10.0.22621 Build 22621.
In the latest version of PA, on W11 (latest build/SP) when you try to use the first level context menu - NOTHING HAPPENS (particularly when you do this from Downloads or Documents folders) - however I noticed that it DOES WORK when you use the context menu from the Desktop. Going to the second level context menu does work however.
PA 2023 22.00.08
Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
Virtual driver PA 2023-01-28 152607.png
It seems a standard problem with new releases :-)
Can I have a link or can it be fixed. Thank you. CU later
Hi there, been a user since 13 years now and in past whenever I had a problem or question I could email, however since 3 weeks it seems like everybody is dead?
Anyway, as kind of a last resort, I post this email a 4th time but in this forum instead now, in the hope for help:
"This is the 3rd time I am emailing you guys as I am missing a working code for the preview of Power Archiver 2023
Can you please help me? I am a 13 years lasting customer of yours, and I am shocked thatr for whatever reason my support tickets are ignored now, why?
thanks in advance!
All the best!
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.
The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.
The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.
Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.
The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.
The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.
Self Extracting Encrypted Archive
I was hasty creating a self extracting encrypted archive at one point. I may not be able to get to the original files. The file size is over 4GB and Windows XP indicates that it is not a valid format. Is there a way to manually access this file of course assuming one supplies the correct password?
I did try to rename the extension to .pae but PA gives a message about unknown encryption method.
1st thing you need to do is atempt to fix the file in order for PA to recognise the format/encryption once you have done that then try entering the apparent password.
However, on the chance the algorithm’s have been damaged due to a “hasty” creation or another reason then unfortunatly the bad news is it will be difficult and pritty much impossible to know where to start.
ie… the container code which instructs applications such as pa on how to read the data or the encryption method.
Hope you do find a way and if so let us know.
What do you mean by fix? THe only option i find relating to that is to fix a zip file. This is an encrypted, self extracting executable.
Sometimes you can fix a self extracting file via windows notepad as I have in the past. But most the time if the file is badly currupt then its a no win situation.
Unfortunetely, the fix function in PA wont work on such a file.
we will see - you might be able to strip the .exe header, if that is possible. As you know by now, windows file system limit for executable files is 4GB.
Did you try opening the archive in PowerArchiver?
Tried Hex editing the beginning of the file with some test files but was not successful. These were about 4MB. When I renamed the file from *.exe to *.pae it seems to see the file within PA but gives a message about unknown encryption method. I was going to try adding the name of the encryption method similar to a normal .PAE file.
did you simply try opening .exe file with PA? I am not sure if that was ever added
The way the information is encoded seems different so no go there for now though the SHA-1 hash for the password is the same.
I got it with a smaller test file.
Use the part from a .pae file using the same encryption method and password. The file name matters not. Take the beginning of the .PAE file including the seemingly blank space “0D0A0D0A”. I was leaving this as “00000000” originally. Add the part starting with SHA-1 from the .EXE file and save the combined as a .PAE file and voila. I’ll have to try the larger file later tonight. Heading over to visit family and watch President Bush on Deal or No Deal.
I Heading over to visit family and watch President Bush on Deal or No Deal.
Now that will be good Entertainment! :D
:) He had pre-recorded a message for a soldier that had been on three tours through Iraq. The guy won $78K.
Now back to our regular programming:
What one has to do assuming one knows the password:
1. Create a “.PAE” file with the same encryption method. The password HASH from the executable file matters. Even using the same password, the hashes can differ and PA would think it is the wrong password.
2. Take the header of the “.PAE” file ending at the end of "SHA-1 ". The space is “20” in hex. Copy this into the beginning of the executable file.
3. Cut/Delete the portion after the newly pasted "SHA-1 " up until the end of the "SHA-1 " the was originally in the “.EXE” file.
4. Erase all but 4 bytes of emtpy space “00000000” after the hash in the “.EXE” file.
5. Rewrite the remaining 4 bytes of empty space to “0D0A0D0A”. “0D0A” is used as a separator.
6. Save the file as “something.pae”.
The name indicated in the beginning of the file does not matter though it will become the name of the decrypted file.
I used HxD Hex Editor which can handle files larger than 4GB. Not all hex editors can.
good, good… I am glad you figured it out.
Is it possible to have PA warn the user when the file size may go above 4GB for an executable? That way they will be made aware that there may be an issue for them?