I’m running PA 21.00.17 64-bit on a 64-bit i7 desktop with W10 Pro, latest version. This 32gb of installed RAM.
As I use the PA pbs system for a number of scheduled archiving operations throughout the day, PA Starter is set to load and run at system startup.
In the course of trying to identify some causes of slowness and bottlenecks in other processes, I notice that PA Starter (PAS) always runs at between 11% and 15% of CPU (see screenshot), usually at about 12-13%. This is by far the highest demanding process on the system, as shown by Task Manager. In Performance Monitor, PAS Average CPU is 8.32, with every other process at less that 1 i.e. in decimal places only.
Task Manager also shows PAS Power Usage as “Very High”, and is the only process shown thus.
I have looked again at the information about PAS at https://wiki.powerarchiver.com/en:help:details:powerarchiver_starter, which was last modified in 2016. The article states a low memory usage for PAS of 784k, which is fair enough, but it is the large CPU overhead which is of concern.
It is of course possible to change the PAS priority, but this has no effect on CPU overhead.
However, is it possible to change PAS, which is required only at intervals to initiate PA scheduled tasks, from consuming so much system resource for every moment of the day?
i just registered my own copy and i need some help to set it…
if i set the ‘configuration>shell extension>open folder after extracting’ checkbox, after decompress an archive is opened the file manager on that folder but… if somebody is using a different file manager how to open XYplorer or Directory Opus for example and NOT the MS file manager?
consider this as a feature request also if not available within the 2022 version
I am looking for a way to stop the UAC elevation prompt when running Powerarchiver. In an old post about PA 2019, someone asked this and got a response to uncheck “all users” at the prompt but I am not seeing where one can do this. It definitely seems like the way to go though as if I click on “More Details” at the prompt I see that it is trying to run “_pautil.exe /paassociate /allusers /my(long binary string)”. Can you let me know? Thanks.
PS I tried renaming _pautil.exe and this worked, but I don’t know what the consequence of doing this may be so I would like to do this properly, thanks.
Just a question is Ashampoo zip pro 4 built by Powerrachiver as it is very similar and uses the pae encryption.
Here is the email…
On Tue, Jun 7, 2022 at 1:20 PM Rich DiBenedetto firstname.lastname@example.org wrote:
Could you assist me with this?
Can I use my current licenses with MacOS?
If not, can I transfer a license to MacOS?
Cheers and Have a Great Day,
On Wed, Dec 9, 2020 at 6:35 AM ConeXware, Inc. email@example.com wrote:
Dear Richard DiBenedetto,
Thank you for supporting PowerArchiver! Please find your activation and registration codes below.
*** Online Activation ***
PowerArchiver Select for PowerArchiver Toolbox English - LIFETIME
is valid until - not limited.
Activation Code: ***
There would be many of us with Intel Processors.
and they have their own optimized zlib algorithm, which can result in more efficiency if used combined with their hardware processor.
Can we get the same Functionality Under Hardware Acceleration Feature?
Zlib is not the only feature that intel has included with their processor, there’s many, which if combined can result in efficient and better compression ratios.
With PowerArchiver context menu enabled, it is crashing Windows 10 File Explorer when right-clicking on the Default User junction in C:\Users. Had 2021 installed, updated to today’s 2022, still getting same crash. Must have Hidden files and folders set to Show, and Hide protected operating system files cleared in File Explorer Options|View.
Windows 10 Enterprise Version 21H2 (OS Build 19044.1708) (64-bit)
PowerArchiver 2022 Version: 21.00.15 (03/2022) 64-bit
PowerArchiver Toolbox Edition Personal English
Disabling PowerArchiver context menu using Autoruns: on the Explorer tab, uncheck PowerArchiver64 under HKLM\Software\Classes\Folders\ShellEx\ContextMenuHandlers and the crash does not happen.
when clciking on powerarchiver update from within powerarchiver we get a windows for the update but it nows sayes script errors. I think it could be due to windows update in windows 10 can you look into it. By pressing cancel it seems to be ok. It seems that the page being displayed as erros on it.
From within PA on the extract popup, buttons are hidden, I must resize the window to get access to the OK/Cancel buttons. Tried on the default notebook screen (Macbook M1 Max 14") as well as on my external monitor (4k).Screenshot_2022-05-12_10-02-10.jpg
Ho già contattato il supporto con il modulo presente qui https://www.powerarchiver.com/it/contact/ da settimane ma non ho ricevuto riscontro e ora che ho aggiornato alla versione 21.00.15 ho notato che il problema persiste.
Quando clicco PDF Encrypt & Sign nel tab Crittografia appare la schemata riportata sotto come se mancassero le funzionalità.
I’ve already contacted support with the form here https://www.powerarchiver.com/it/contact/ weeks ago but I haven’t received any feedback and now that I’ve updated to version 21.00.15 I’ve noticed that the problem persists.
When I click on PDF Encrypt & Sign in the Encryption tab the schematic below appears as if the functionality is missing.
I have tried to burn a DVD with PowerArchiver 2022 Final, but it didn’t work because PA didn’t found the external DVD-Burner.
I have tried several burners from Sony, LG, Dell.
I have connected the burners with several USB-Ports but unfortunately without any success.
With other burning software, e. g. Nero, all burner worked perfect on each USB-Port.
The same problem occured with PA2018 and it was solved with an update, but I don’t remember the detailed software version.
Could you check the possibility of an bug, please?
Thank you for your support in advance!
PowerArchiver crashes when decrypting Rijndael AES 256bit.
When descrypting two different encrypted files (with Rijndael AES 256bit), I get PowerArchiver crashing with the same message:
Access Violation at address 027C2E87 in module ‘PAISO.DLL’ read of address 00000000.
PowerAchiver version 9.63.02. My CPU is Core 2 Duo, and I am running Windows Home edition (32bit).
what are the contents of pae archive? (what kind of files). And what is the file size?
One file is ~ 85MB, another ~ 376MB. There is only one file in each encrypted archive. Encrypted files are binary, not text files.
rar. Does encryption algorithm care what format the encrypting file is?
rar. Does encryption algorithm care what format the encrypting file is?
depending on what options you are using, it might be automatically extracting archive as well.
I cant reporduce this issue easily. Can you please let me know how did you encrypt the archive (from where and what options) and how are you decrypting it?
I use shell extension both - to encrypt and decrypt. My moves:
1. Select a file to encrypt with right mouse button. choose Encrypt.
2. Change method to Rijndael AES 256 bit (default was Rijndael 128bit).
3. Check “Delete original file after encryption”.
4. Check “Hide filename”.
5. Leave “Create self extracting file” unchecked.
6. Enter password. My passwords are above 30 symbols in length. Yes, I know, I am too paranoid :)
Passwords for files I get PowerArchiver chrashed are similar. I have encrypted one more(third) file with self extracting option turned on - it decrypts correctly.
To decrypt I use:
1. Click right mouse button on encrypted archive. Select “Extract to c:<path to=”" default=“” directory=“” for=“” archive=“”>
2. Enter password.</path>
One strange thing. I just tried to encrypt ~135 MB file with the same password I used in one of those archives, which cannot be decrypted without crash. But when I click with the mouse right button on it - it says : “Decrypt to c:\blablabla”, not “Extract to c:\blablabla” as I see in those two archives I am not able to decrypt successfully. Is this significant?
I was able to successfully decrypt both files using this procedure:
1. Start powerarchiver.
2. Do “Open” and browse to encrypted file. Open it.
3. After the “enter password” dialog appears, close it (if I enter correct password, PowerArchiver starts decrypting it, and it fails. I can see that, because after some time the label “Decrypting file….” with the progress bar in the status bar disappears, and the list of files inside opened encrypted archive is empty).
4. Now I can see the file I need to decrypt in the PowerArchiver window. I select it, and click the “Extract” icon in the menu above, enter correct password, path to decrypt the file to, and voila - decryption successful.
thanks, we will look into it…