-
PA2023 Win10, (same problem with older releases but never reported)
PA Soft is installed on partition D. (exclusive for installed progs)
Then I created on my partition G: the folders as configured in PA Settings ‘Folders’.0fcf1b09-1b91-4b74-b250-f8cf908a3348-Ashampoo_Snap_maandag 20 maart 2023_11h54m34s.png
Screenshot 2023-03-20 121152.png
The problem : Any activity on PA is saved in these folders…
PA ignores them and still use the default settings. Whats wrong ? Regards, Pirrbe -
I am still using Powerarchiver 2022 and it does not show pdf markups in the preview. Is there a setting to get version 2022 to show pdf markups in the preview? If not, does this work in version 2023?
-
The question that I have about PA archives is what happens if say ConeXware, as a company, dies in the future? What happens to any PA files that are created today? Can these files be decompressed with a copy of a PowerArchiver that can no longer phone home to the mothership thus can’t be registered or activated?
I mean, I can understand that new PA files wouldn’t be able to be created if the program isn’t registered but what about an un-registered copy because well, the question that I posed above?
It’s questions like this that make me not want to store anything really valuable in PA files out of fear that I, at some point in the future, might lose access to said data inside those files. OK, 7ZIP might not be able to compress as heavily as PA but at least it’s open source and any 7ZIP files will still be able to be read and decompressed ten, twenty, or fifty years from now.
-
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
-
Is this a known problem? Is there a fix coming? This is a primary reason I buy PA.
I’ve tried both methods I know to extract multiple zips at the same time. 1) Multi Extract feature in the GUI. 2) In Windows File Explorer, select multiple zips, right click, use PA context menu to Extract or Extract To…
Is there a setting I missed? Or maybe it really is processing in parallel, but I can’t detect it? Nothing tells me in the Processes in Task Manager that multiple PA extracts are running. And my CPU, memory and disk resources do not look like a lot of extracts are running.
I’m using PA 2022 Standard version 21.00.18 on Windows 11 Pro version 10.0.22621 Build 22621.
-
In the latest version of PA, on W11 (latest build/SP) when you try to use the first level context menu - NOTHING HAPPENS (particularly when you do this from Downloads or Documents folders) - however I noticed that it DOES WORK when you use the context menu from the Desktop. Going to the second level context menu does work however.
-
Is the version Preview 2023 also considered to be tested by the testteam ? In the past we got messages in the forum for testing out version x.x, to be downloaded by fastring, or I missed the one for 2023. (I discovered 2023 on the official web…)
CU, Pirrbe.
-
PA 2023 22.00.08
Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
Virtual driver PA 2023-01-28 152607.png
It seems a standard problem with new releases :-)
Can I have a link or can it be fixed. Thank you. CU later -
Hi there, been a user since 13 years now and in past whenever I had a problem or question I could email, however since 3 weeks it seems like everybody is dead?
Anyway, as kind of a last resort, I post this email a 4th time but in this forum instead now, in the hope for help:
"This is the 3rd time I am emailing you guys as I am missing a working code for the preview of Power Archiver 2023Can you please help me? I am a 13 years lasting customer of yours, and I am shocked thatr for whatever reason my support tickets are ignored now, why?
thanks in advance!
All the best!
Joerg" -
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
PA 21.00.18 running on Windows 7 64 bit.
I made a big .PA file and thought I’d check it was made correctly with Menu / Actions / Test.
Discovered:
a) PA always issues a UAC prompt to do this!
b) PA always says there are many errors in PA files. -
When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.
The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.
The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.
Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.
The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.
The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.
PowerArchiver 2007 10.00 Beta 5
-
Dear users,
We are pleased to show you our latest and greatest version - PowerArchiver 2007 in BETA form.
After several months of development, we think that time has come to share it with the “outside” world.
In order to show appreciation to our customers, Beta 1, Beta 2 and Beta 3 will be released only to registered customers for download through their account.
My Account:
https://www.conexware.com/shopNote: You will need to resend codes to yourself and get latest PA 2007 codes that will be usable with final version of PA 2007 as well.
Please understand that future versions will be available for everyone to try and use. We simply wanted to give something extra to the people who have supported us for so long.
Thank you!
PA Team,
ConeXware, Inc. -
Version 10.00 BETA [November/2006]
Major improvementsMajor changes:
- Completely new “Modern” Interface
- Queue System (Add/Extract/Backup)
- PowerArchiver Starter - system tray application
- Support for transparent updating 7-zip archives
- New Plug-in System - TC Compatible
- Hybrid Shell Extensions
- 7zip SFX creation support
- True Multilanguage Edition
- Portions re-written in assembler like language
- Optimized speed, size and memory usage
Improvements:
- Improved Graphics and User Experience
- Improved Updating System
- Improved Progress Bar with Pause
- Enhanced Explorer View support
- Various minor updates and changes
-
-
Please Note:
This is an BETA release. It is not perfect. There are some known issues that will be improved in B2.
Future improvements
- Some of the graphics will be improved
- Help will be updated with more info
- 7zip SFX will be re-written for smaller size
- Installation will be repackaged
Please report any issues you find in these forums. There will be 3-4 beta releases before we release final PA 2007.
thank you!
PA Team
ConeXware, Inc. -
BETA 2
Whats New:
- New MSI based Installer
- Smaller 7zip SFX
- Graphics improved
- Several smaller issues fixed
- Small improvements
Please download latest version from your account. We expect Beta 3 this week, and it should be first public Beta.
You will probably want to uninstall previous versions of PowerArchiver, due to new installer. You dont really have to though.
thank you,
PA Team
ConeXware, Inc. -
BETA 3
Numerous smaller updates and fixes. Please check your reported bugs and see if they have been fixed.
You can download it from your PA account. Just download installer, there is no need to get new keys (PA 2007 keys will work throughout 2007 release).
thank you!
PA Team,
ConeXware, Inc. -
BETA 4
Please check your reported bugs and see if they have been fixed.
You can download it from your PA account. Just download installer, there is no need to get new keys (PA 2007 keys will work throughout 2007 release).
thank you!
PA Team,
ConeXware, Inc. -
BETA 5
Please check your reported bugs and see if they have been fixed.
You can download it from your PA account. Just download installer, there is no need to get new keys (PA 2007 keys will work throughout 2007 release).
This is first time Beta release is available to International license customers, and in German language!
thank you!
