-
Hello everyone
I hope that despite my poor control of English, you can understand me.
When compressing a file, by default the extension is included as part of the file name. for example, if the file is name.pdf, the compressed file will be name_pdf.zip.
Is there any way for the extensions not to be included in the compressed file name? As much as I have searched I don’t see such an option.
Thanks for your time
-
Hi,
I’m using Convert Archives on a local folder of .zip files, converting them to .lzh files, and I’m finding that perhaps 1 in 75 files is actually converting and outputting a file. Even then, the .lzh file is incomplete, missing most of the source files.
The progress bars completes OK, say 75/75 files, but only one .lzh file exists in the output folder.
It seems to be the same with different source and output folders on both local and USB disk - I can’t see a pattern.
The files extract and compress (to .lzh) without issue on their own.
Is there a log file I can check please, to see why PA does not like these files as part of the batch conversion?
Thanks very much, Rich.
-
I’m experiencing very slow extraction speed of multipart RAR files. For the first part the extraction is super fast but when PA reaches the part2.rar the extraction from there on gets super slow. PA needed for a 6,3 GB multipart archive 30 minutes to extract. I tested then with another program and it just took 70 seconds. I had this slow extraction speed with PA for quite a long time and I always thought that is maybe because of a high compression rate that the extraction would take longer. But it seems that only PA gets that slow.
I have lots of multipart archives that are 10+ GB and with PA it would be really time consuming. Is there any solution to this?
-
Hi -
I have powerarchiver licenses for powerarchiver standard and toolbox (and also as a result for pro).
I can successfully register powerarchiver with my pro/toolbox codes, and it unlocks the majority of the content/features. However if I try and create a .pa style archive I get the registration popup saying I need PowerArchiver Pro (if I go to help/about I can verify I have the relevant version and it’s registered to me).
-
Hi,
I can’t close ZIP archive comments. Neither in archive nor in explorer view the “x button” works. I’m testing with PA 20.00.73 (x64 and x86)
e5f2dd8c-e008-4c26-a364-4b1a0a8f8c69-image.png
-
Configuration:
Powerarchiver 2021 20.00.73
Windows 10 Education 10.0.19042 Build 19042When extracting gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf.tar.xz , Powerarchiver wrongly thinks some .exe files have a length of zero:
98773b3b-65c0-48fa-8cd4-d081b2e0adee-image.png
Once extracted:
D:\Temp\Powerarchiver\gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf\bin>dir *.exe Volume in drive D is DATA Volume Serial Number is 0E12-BCA2 Directory of D:\Temp\Powerarchiver\gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf\bin 2020-11-20 07:10 PM 1,391,599 arm-none-linux-gnueabihf-addr2line.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ar.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-as.exe 2020-11-20 07:41 PM 3,030,119 arm-none-linux-gnueabihf-c++.exe 2020-11-20 07:10 PM 1,389,293 arm-none-linux-gnueabihf-c++filt.exe 2020-11-20 07:41 PM 3,027,513 arm-none-linux-gnueabihf-cpp.exe 2020-11-20 07:10 PM 4,040,503 arm-none-linux-gnueabihf-dwp.exe 2020-11-20 07:10 PM 391,769 arm-none-linux-gnueabihf-elfedit.exe 2020-11-20 07:41 PM 0 arm-none-linux-gnueabihf-g++.exe 2020-11-20 07:41 PM 3,026,926 arm-none-linux-gnueabihf-gcc-10.2.1.exe 2020-11-20 07:41 PM 609,607 arm-none-linux-gnueabihf-gcc-ar.exe 2020-11-20 07:41 PM 609,607 arm-none-linux-gnueabihf-gcc-nm.exe 2020-11-20 07:41 PM 609,607 arm-none-linux-gnueabihf-gcc-ranlib.exe 2020-11-20 07:41 PM 0 arm-none-linux-gnueabihf-gcc.exe 2020-11-20 07:41 PM 2,165,533 arm-none-linux-gnueabihf-gcov-dump.exe 2020-11-20 07:41 PM 2,343,605 arm-none-linux-gnueabihf-gcov-tool.exe 2020-11-20 07:41 PM 2,450,233 arm-none-linux-gnueabihf-gcov.exe 2020-11-20 07:54 PM 9,605,899 arm-none-linux-gnueabihf-gdb.exe 2020-11-20 07:41 PM 3,028,997 arm-none-linux-gnueabihf-gfortran.exe 2020-11-20 07:10 PM 1,412,943 arm-none-linux-gnueabihf-gprof.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ld.bfd.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ld.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ld.gold.exe 2020-11-20 07:41 PM 25,546,567 arm-none-linux-gnueabihf-lto-dump.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-nm.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-objcopy.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-objdump.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ranlib.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-readelf.exe 2020-11-20 07:10 PM 1,393,083 arm-none-linux-gnueabihf-size.exe 2020-11-20 07:10 PM 1,392,464 arm-none-linux-gnueabihf-strings.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-strip.exe 32 File(s) 67,465,867 bytes 0 Dir(s) 1,002,422,431,744 bytes freeWhen the same archive is being extracted from a git bash session (after having installed git 2.30.1 for Windows 64 bit version from git-scm.com), the .exe files are extracted as expected:
xz -k -d gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf.tar.xz tar xf gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf.tar cd gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf/bin ll *.exe -rwxr-xr-x 1 User 197121 1391599 Nov 20 19:10 arm-none-linux-gnueabihf-addr2line.exe* -rwxr-xr-x 2 User 197121 1421598 Nov 20 19:10 arm-none-linux-gnueabihf-ar.exe* -rwxr-xr-x 2 User 197121 2028927 Nov 20 19:10 arm-none-linux-gnueabihf-as.exe* -rwxr-xr-x 2 User 197121 3030119 Nov 20 19:41 arm-none-linux-gnueabihf-c++.exe* -rwxr-xr-x 1 User 197121 1389293 Nov 20 19:10 arm-none-linux-gnueabihf-c++filt.exe* -rwxr-xr-x 1 User 197121 3027513 Nov 20 19:41 arm-none-linux-gnueabihf-cpp.exe* -rwxr-xr-x 1 User 197121 4040503 Nov 20 19:10 arm-none-linux-gnueabihf-dwp.exe* -rwxr-xr-x 1 User 197121 391769 Nov 20 19:10 arm-none-linux-gnueabihf-elfedit.exe* -rwxr-xr-x 2 User 197121 3030119 Nov 20 19:41 arm-none-linux-gnueabihf-g++.exe* -rwxr-xr-x 2 User 197121 3026926 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-10.2.1.exe* -rwxr-xr-x 1 User 197121 609607 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-ar.exe* -rwxr-xr-x 1 User 197121 609607 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-nm.exe* -rwxr-xr-x 1 User 197121 609607 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-ranlib.exe* -rwxr-xr-x 2 User 197121 3026926 Nov 20 19:41 arm-none-linux-gnueabihf-gcc.exe* -rwxr-xr-x 1 User 197121 2165533 Nov 20 19:41 arm-none-linux-gnueabihf-gcov-dump.exe* -rwxr-xr-x 1 User 197121 2343605 Nov 20 19:41 arm-none-linux-gnueabihf-gcov-tool.exe* -rwxr-xr-x 1 User 197121 2450233 Nov 20 19:41 arm-none-linux-gnueabihf-gcov.exe* -rwxr-xr-x 1 User 197121 9605899 Nov 20 19:54 arm-none-linux-gnueabihf-gdb.exe* -rwxr-xr-x 1 User 197121 3028997 Nov 20 19:41 arm-none-linux-gnueabihf-gfortran.exe* -rwxr-xr-x 1 User 197121 1412943 Nov 20 19:10 arm-none-linux-gnueabihf-gprof.exe* -rwxr-xr-x 4 User 197121 2572182 Nov 20 19:10 arm-none-linux-gnueabihf-ld.bfd.exe* -rwxr-xr-x 4 User 197121 2572182 Nov 20 19:10 arm-none-linux-gnueabihf-ld.exe* -rwxr-xr-x 2 User 197121 4550029 Nov 20 19:10 arm-none-linux-gnueabihf-ld.gold.exe* -rwxr-xr-x 1 User 197121 25546567 Nov 20 19:41 arm-none-linux-gnueabihf-lto-dump.exe* -rwxr-xr-x 2 User 197121 1404945 Nov 20 19:10 arm-none-linux-gnueabihf-nm.exe* -rwxr-xr-x 2 User 197121 1531656 Nov 20 19:10 arm-none-linux-gnueabihf-objcopy.exe* -rwxr-xr-x 2 User 197121 1991350 Nov 20 19:10 arm-none-linux-gnueabihf-objdump.exe* -rwxr-xr-x 2 User 197121 1421598 Nov 20 19:10 arm-none-linux-gnueabihf-ranlib.exe* -rwxr-xr-x 2 User 197121 1163376 Nov 20 19:10 arm-none-linux-gnueabihf-readelf.exe* -rwxr-xr-x 1 User 197121 1393083 Nov 20 19:10 arm-none-linux-gnueabihf-size.exe* -rwxr-xr-x 1 User 197121 1392464 Nov 20 19:10 arm-none-linux-gnueabihf-strings.exe* -rwxr-xr-x 2 User 197121 1531656 Nov 20 19:10 arm-none-linux-gnueabihf-strip.exe*The same archive file does extract properly under a native Linux Ubuntu 20.04 system, or under Windows 10 using the WSL2 Linux subsystem using xz and tar.
-
Its a long time since people reported bugs like converter bug still no fix yet
-
Hi,
I just saw, that on the Website, PowerArchiver 2021 20.00.73 is advertised as latest version. (Actually, the downloaded version says, it’s 20.00.70 in the about dialog)
But it still comes with the “red icon set” for preview versions and has some known unfixed bugs, as I read here.Is it sufficiently stable to be used on production systems?
Kind regards
-
This happens in Archive and Explorer Mode:
Navigate to a folder, which is UAC protected (for example C:\Program Files) Right click -> New -> Folder (or any other item)
=> Nothing happensExpected behaviour: UAC prompt is triggered and a new folder (or file) will be created
PowerArchiver 19.00.57
-
Hi I recently bought PowerArchiver and found some bugs and issues that I hit testing some of the features out.
If you are doing a backup and on the compression options screen its default is compression format is PA with no option to change disk spanning. If you change to 7-zip you can change disk spanning. If you change the disk spanning then move back to PA format the field for disk spanning disables but the option stays set to what you changed it to. When you do a backup it will use PA with files spanning but PowerArchiver says that its not a valid format when you open it. If PA can’t really do file spanning then this screen is allowing it.
I have attached an image where the progress bar is in the middle of the CD/DVD/BD Tools screen.
alt text
I have a 7-Zip file I created using the backup tools doing an increment backup. It opens and extracts just fine but if you using the Test option PowerArchiver locks up. Link to file: Backup-2021-02-05-20-35-36 TEST LOCKUP.7z
On any Zip/PA/7-Zip process the pause and cancel buttons do not work. You have to hard kill the entire application to get out.
-
There would be many of us with Intel Processors.
and they have their own optimized zlib algorithm, which can result in more efficiency if used combined with their hardware processor.
Reference:
https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/zlib-compression-whitepaper-copy.pdfCan we get the same Functionality Under Hardware Acceleration Feature?
Zlib is not the only feature that intel has included with their processor, there’s many, which if combined can result in efficient and better compression ratios.
-
Hi,
After the batch archiving is complete, and if I click on whitespace of the PA app, I get this error.
PA Batch.png
I did check for ongoing process and ensured no archives were corrupt, It seems like activity did complete successfully but the error is shown for no reason, and only after clicking the whitespace.
Please see if this can be removed.
-
I’m using the Kaspersky Total Security.
I have configured PA as exclusion as followed:
PA Exclusion.png
and also is set us trusted application
PA Trusted Application.png
Scenario:
My Antivirus likes to scan for everything, and it’s safeguarding behavior is to prevent the access to the file until the file is properly scanned for.
The issue:
PA when losses the access to file, it is stuck, consumes Resources, and never completes the process or throws any error
Recommendation:
PAStarter should also work as PAMonitor:
There should be a monitoring process, at least if I’m using queuing feature, that should check for never ending compression processes and terminate them so the queue can be little bit automated.Also,
There should be multiple attempts at retrying if PA loses access to or is denied, instead of having to see process was stuck for longer duration.Or, better, save the parameters I used for keeping the files in compression, and automatically restart the whole compression process after termination the same, of same folders and files set, this should happen in case if compression was stuck.
-
If you use Queue Feature, you are not saving on space, you are just squeezing less.
Here’s explaination:
https://youtu.be/XcxG2wxyink
I did test the same on multiple files, and of different types.
It does have large difference for each large file you are trying to squeeze.
Folders with multiple files, just have no benefits if you use Queue Feature
-
Hello!
I am using the portable version of PA2021. After switching from build 58 to 73 I have problems with the color-scheme:
While 58 behaves like expected and showed everything in light or dark colors according to the settings, 73 always shows the lower part of the window in dark colors, no matter whether I select automatic, light or dark.
This happens on a clean installation of 73 as well as on an update from build 58. I have attached two images generated on the same machine at the same time with the same settings. The upper shows build 73, the lower 58. Is it a bug or some changed setting I miss?
Thanks for help!
A.BorquePA2021_73.png PA2021_58.png
-
Hello,
PowerArchiver Command Line 7 support file greater than 2 Go ?
Thanks
-
If you have tabbed archive browsing(reuse same window for all archive opening)
and if you open two archives, and right click on older one to view properties it will only show of the recent archive that was opened, on all tabs/archivesupgraded to 20.0.73
-
Hi.
I currently own the PowerArchiver Select - lifetime free upgrades and support for PowerArchiver Toolbox English license.
This license is active on 1 device. Does the license allow me to activate PowerArchiver on a second device that I own? Or do I need a separate license for that?
Thank you ! :)
-
Hello!
While the installable version of PA 2021 has already received two updates and is at version 20.0.73 the portable version still remains at the initially released build 58. Are there plans to update that version, too?
Thanks for a reply! -
I’ve been dealing with an intermittent explorer.exe crash for 5-6 years now. It happens randomly and will usually occur multiple times within a single session of an hour or two on my machine when manipulating files through Windows Explorer. explorer.exe is the only thing that ever crashes, so it’s not hardware IMO. I’ve done all hardware diagnostics and RAM is good. I’ve even swapped out motherboards with different brand and even the exact same one and it still crashes. sfc /scannow indicates system files are fine. I’ve done multiple reinstalls of the OS with no positive results. This crashing has happened on Windows 7 64-bit and Windows 10 64-bit. It seemed to get more frequent with Windows 10 after upgrading last year. I’ve also been using PowerArchiver throughout that time period (upgrading over time with new releases). I recently disabled all non-Microsoft extensions via ShellExView and saw no crashes for about 10 days, which is really unusual. I turned back them all back on after 10 days and saw another explorer.exe crash within the hour. So I disabled all 32-bit extensions and saw another crash. Following that I disabled all the PowerArchiver shell extensions and haven’t seen a crash after a day of heavy usage manipulating files within Windows Explorer, which doesn’t happen for me. The crash dumps I’ve captured don’t seem to indicate PowerArchiver is involved but I have a hunch it has something do with PowerArchiver shell extensions. The system even feels smoother with the PA extensions disabled. Windows 10 reliability monitor always has the same type of problem:
Description Faulting Application Path: C:\WINDOWS\explorer.exe Problem signature Problem Event Name: BEX64 Application Name: explorer.exe Application Version: 10.0.17134.165 Application Timestamp: 4031a9f8 Fault Module Name: StackHash_e78e Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Offset: PCH_8D_FROM_ntdll+0x000000000009AA54 Exception Code: c0000005 Exception Data: 0000000000000008 OS Version: 10.0.17134.2.0.0.256.48 Locale ID: 1033 Additional Information 1: e78e Additional Information 2: e78e327659b46c9a0c6916396b253cbf Additional Information 3: cebf Additional Information 4: cebf952c5db535ae7880488aafce55d9 Extra information about the problem Bucket ID: 1a57e4e784fbc735c231c68bd88581a9 (1311047270476906921)I know this is a very nebulous explanation but is there any way to link this up to PA shell extensions as the cause? I can provide the crash dumps and additional information if necessary.
Fast Ring: PowerArchiver 2017 17.00.83/85/86/87 RC2
-
Release Notes - PowerArchiver - Version 17.00.83 - 7th of July 2017
** Improvement
* [PA-398] - improve text step
* [PA-1003] - small usability improvements in calculate memory info
* [PA-1004] - memory calculation does not work with advanced selection window
* [PA-1005] - advanced add options improvements
* [PA-1006] - advanced add window - file list improvements
* [PA-1007] - improve loading speed of Add window in main pa
* [PA-1013] - use 32px icon size on toolbars at 125 dpi
* [PA-1014] - bwt3:qlfc3 adjustment for mt1 usage
* [PA-1017] - update to latest F3 engine
* [PA-1029] - editing exiting profiles
* [PA-1030] - add dropdown to save profiles buttons in add window, with save being default and delete being under dropdown
* [PA-1034] - apply updated translations 06.28.17
* [PA-1035] - create .sf2 step: use bwt3 codec
* [PA-1037] - updated mp3 codec
* [PA-1038] - update mp3 codec params
* [PA-1039] - non solid and more than one solid block result in wrong ratio and size readings
* [PA-1042] - update pam/.ppm steps with ppmd_sh2
* [PA-1045] - add window - maximized size, bad looks** New Feature
* [PA-960] - save compression profile with advanced option info
* [PA-1040] - implement ppmd_sh2 instead of ppmd_sh
* [PA-1041] - update pgm, s3m step to ppmd_sh** Bug
* [PA-998] - .78: Stack overflow and AV error when minimizing progress bar during compression thru shell
* [PA-1001] - Sort field bottom border not showing in light sklns
* [PA-1016] - D&D into add window
* [PA-1027] - Memory Usage text cut off
* [PA-1028] - Using mp3 codec brings up CMD windows and progress bar is minimised
* [PA-1036] - bwt3 memory counting, wrong info
* [PA-1046] - Testing dialog stays in back when always on top selectedRelease Notes - PowerArchiver - Version 17.00.85 - 14th of July 2017
** Improvement
* [PA-1009] - add modern icons to add, advanced add windows when modern icon set is used
* [PA-1021] - test: show filelist for PA
* [PA-1031] - saving settings in advanced options issues
* [PA-1039] - non solid and more than one solid block result in wrong ratio and size readings
* [PA-1050] - update to latest F4 codec engine
* [PA-1052] - update all translations to 7th July 2017 versions
* [PA-1062] - advanced add window - file list improvements** New Feature
* [PA-1051] - implement new mp3 codec** Bug
* [PA-969] - drag and drop add window / select files should use last used folder as starting point
* [PA-971] - Add windows bottom buttons cut off under 720p
* [PA-1015] - PA format progress bar continues when paused
* [PA-1019] - PA Default profile should not save advanced settings automatically
* [PA-1033] - add window - change name in via shell add and hit enter, old name is used
* [PA-1043] - Encrypted to PAE2 grayed out in add window>Options tab
* [PA-1056] - classic simple skin - weird add window look
* [PA-1057] - Gridlines unchecked in config after restart PA
* [PA-1059] - Advanced Add window does not show properly when Add clicked from main PA
* [PA-1060] - opening several files at once shows error
* [PA-1064] - standard encryption features
* [PA-1065] - open zip in preview in explorer, go to archive mode, it stays in preview windowRelease Notes - PowerArchiver - Version 17.00.86
** Improvement
* [PA-1069] - return of explorer hdd browse in archive mode** Bug
* [PA-921] - MSI version throws network error during installation
* [PA-974] - run backups twice in a row from backup interface, ends up 7z file in .pa
* [PA-984] - Backup: .PA format backups always overwrite when not selected to
* [PA-985] - Backup: Additional options dropdown empty when PA format used, in final backup screen
* [PA-1061] - lower mp3 codec mt if file is smaller than C.
* [PA-1067] - PA 2017 inno setup uninstalls PA 2016 Offline helpRelease Notes - PowerArchiver - Version 17.00.87
** Bug
* [PA-927] - Canceling PA file creation not working properly
* [PA-976] - investigate PA crash during 7z compression
* [PA-1044] - Some Advanced Profile options are not saved
* [PA-1063] - Virtual Drive not showing correctly in 32bit OS
* [PA-1068] - Preview window hidden in .85
* [PA-1070] - compress to 7z does not ask for overwrite or updatePA 2017 17.00.87 download:
http://dl.powerarchiver.com/2017/powarc170087.exePA 2017 17.00.85 Portable download:
http://dl.powerarchiver.com/2017/powarcportable170085.exeWhats New
New mp3 codec implemented in experimental codecs, new ppmd_sh2 codec, updated codec engine with bug fixes, less memory usage. Fully usable compression profiles with advanced options, updated add and extract windows. Shell compress/extract now instantly start actions compared to previous 2s-5s delay. Many more fixes and changes.Thank you!
PA Team
ConeXware, Inc. -
@Alpha-Testers new mp3 codec testing here: https://forums.powerarchiver.com/topic/5788/experimental-codecs-info-updates
-
@spwolf said in Fast Ring: PowerArchiver 2017 17.00.83 RC2:
PA 2017 17.00.77 download:
BTW, download link names refer to 77, even if download point to 83.
-
Avira antivirus is throwing up a false positive with this build.
According to Avira it contains TR/Crypt.XPACK.Gen3.
I’ve reported it as a fp, . Hopefully they will fix it. -
@Luxor said in Fast Ring: PowerArchiver 2017 17.00.83 RC2:
Avira antivirus is throwing up a false positive with this build.
According to Avira it contains TR/Crypt.XPACK.Gen3.
I’ve reported it as a fp, . Hopefully they will fix it.What file specifically? we might need to report it ourselves for faster handling.
-
@spwolf said in Fast Ring: PowerArchiver 2017 17.00.83 RC2:
What file specifically? we might need to report it ourselves for faster handling.
The report log points to.
C:\Program Files (x86)\PowerArchiver\POWERARC-PACKMP3.EXE -
@Luxor said in Fast Ring: PowerArchiver 2017 17.00.83 RC2:
@spwolf said in Fast Ring: PowerArchiver 2017 17.00.83 RC2:
What file specifically? we might need to report it ourselves for faster handling.
The report log points to.
C:\Program Files (x86)\PowerArchiver\POWERARC-PACKMP3.EXEi have personally reported it 10x to them in past 30 days, it should have been fixed. According to VirusTotal it is not reported anymore, i am sure you are using latest definitions? thanks.
-
@spwolf said in Fast Ring: PowerArchiver 2017 17.00.83 RC2:
i am sure you are using latest definitions?
I sure am.
-
I don’t like the .83 version at all. It’s always locking up saying not responding. Makes the whole PC slow and a bit unreliable.
-
@Brian-Gregory said in Fast Ring: PowerArchiver 2017 17.00.83 RC2:
I don’t like the .83 version at all. It’s always locking up saying not responding. Makes the whole PC slow and a bit unreliable.
when does it happen? Let us know more… first report so far. What has changed is add and extract windows, not much else inside PA (other than codecs).
-
@Luxor said in Fast Ring: PowerArchiver 2017 17.00.83 RC2:
Avira antivirus is throwing up a false positive with this build.
According to Avira it contains TR/Crypt.XPACK.Gen3.
I’ve reported it as a fp, . Hopefully they will fix it.Just had an email from the saying it has been fixed and it looks like it has.
-
@Luxor said in Fast Ring: PowerArchiver 2017 17.00.83 RC2:
@Luxor said in Fast Ring: PowerArchiver 2017 17.00.83 RC2:
Avira antivirus is throwing up a false positive with this build.According to Avira it contains TR/Crypt.XPACK.Gen3.
I’ve reported it as a fp, . Hopefully they will fix it.Just had an email from the saying it has been fixed and it looks like it has.
we also re-uploaded the setup with version of the exe that has been whitelisted properly… thanks!
-
@spwolf I reinstalled over the top. Possibly it’s better now but checking for updates is often very slow and shows “Not responding”. Maybe it’s just your update server that’s slow.
-
@Brian-Gregory said in Fast Ring: PowerArchiver 2017 17.00.83 RC2:
@spwolf I reinstalled over the top. Possibly it’s better now but checking for updates is often very slow and shows “Not responding”. Maybe it’s just your update server that’s slow.
it is small text file on our CDN, so likely a problem between CDN servers and your ISP. I had a vision of PA crashing and freezing :).
If it keeps happening, we can send tracert logs to the CDN, maybe they can re-route it.
-
@spwolf It seems much better now I rebooted my modem. Oops.
-
@Alpha-Testers update with .85 build info, check it out and have a nice weekend!
-
@Alpha-Testers .86 is out, check it out…
-
Fixed. Though I had to import my settings for it to take effect.
-
@Luxor said in Fast Ring: PowerArchiver 2017 17.00.83/85/86 RC2:
Fixed. Though I had to import my settings for it to take effect.
Under View> Display Style… we will add it to the same button on status bar too.
-
@spwolf integration of this option in toolbar is a brilliant idea, works perfect again now. I also had my doubts about my settings …
-
@Alpha-Testers build .87 with some important fixes, thanks for reporting!
-
It seems that 17.00.88 is now available in PatchBeam.
-
New release is out:
https://forums.powerarchiver.com/topic/5801/slow-ring-powerarchiver-2017-17-00-90-finalMake sure to use Patchbeam in the future for super fast updates.
