-
when clciking on powerarchiver update from within powerarchiver we get a windows for the update but it nows sayes script errors. I think it could be due to windows update in windows 10 can you look into it. By pressing cancel it seems to be ok. It seems that the page being displayed as erros on it.
-
From within PA on the extract popup, buttons are hidden, I must resize the window to get access to the OK/Cancel buttons. Tried on the default notebook screen (Macbook M1 Max 14") as well as on my external monitor (4k).Screenshot_2022-05-12_10-02-10.jpg
-
Just uncompressed a RAR file that has a folder within, PA created the folder but the files inside are not being saved into folder because directory separator is a BACKSLASH (Windows style) instead of SLASH (macOS).Screenshot_2022-05-12_09-59-08.jpg
-
Hello,
When clicking on the main ribbon for a new version I get a script error message.
Actual version: 21.00.15 - French version
OS: W10 21H2 19044.1645Best regards
WilfridPS: Keep building such good software
-
Ho già contattato il supporto con il modulo presente qui https://www.powerarchiver.com/it/contact/ da settimane ma non ho ricevuto riscontro e ora che ho aggiornato alla versione 21.00.15 ho notato che il problema persiste.
Quando clicco PDF Encrypt & Sign nel tab Crittografia appare la schemata riportata sotto come se mancassero le funzionalità.I’ve already contacted support with the form here https://www.powerarchiver.com/it/contact/ weeks ago but I haven’t received any feedback and now that I’ve updated to version 21.00.15 I’ve noticed that the problem persists.
When I click on PDF Encrypt & Sign in the Encryption tab the schematic below appears as if the functionality is missing.de9b4a2d-07e7-4323-a5a3-1b91e73dafc0-image.png
-
I have tried to burn a DVD with PowerArchiver 2022 Final, but it didn’t work because PA didn’t found the external DVD-Burner.
I have tried several burners from Sony, LG, Dell.
I have connected the burners with several USB-Ports but unfortunately without any success.
With other burning software, e. g. Nero, all burner worked perfect on each USB-Port.
The same problem occured with PA2018 and it was solved with an update, but I don’t remember the detailed software version.
Could you check the possibility of an bug, please?
Thank you for your support in advance! -
Quando creo un archivio zip con un altro programma ad esempio Winrar se apro il file con Winrar vi sono visualizzati anche le date originali di Accesso e Creazione.
Se ottimizzo quel file zip con la funzione Ottimizza archivio di PowerArchivier (o creo un nuovo archivio) il file risultate non ha più le date originali di Accesso e Creazione.
C’è una opzione per preservare questi dati? (Non l’ho trovata nelle impostazioni del programma e ho già abilitato le opzioni “salva info complete cartella” presente in “Profili di compressione”)
/
When I create a ZIP archive with another program such as Winrar, if I open the file with Winrar, the original Access and Creation dates are also displayed.
If I optimize that zipper file with the Optimize Archive function of PowerArchivier (or create a new archive) the resulting file no longer has the original Access and Creation dates.
Is there an option to preserve this data? (I haven’t found it in the program settings and I have already enabled the “save complete folder info” options in “Compression Profiles”) -
Upgraded from 2021 to 2022. Selecting ‘backup’ no scripts are showed. Only after editing and saving an existing script (explorer) it shows up in the PA backup folder.
So is the ‘backup’ icon to open the Backup screen only for creating ‘new’ ones. This means that you have to open ALL your old pbs files and to save them again… not user friendly.
No way to improve this ? Thank you.b606f084-9d96-461e-b93b-6ba9310a0f6c-image.png
-
PowerArchiver 2022 - Final Version - 21.00.15
Download:
https://powerarchiverdl.cachefly.net/2022/powarc210015.exeInformation about PowerArchiver 2022 - 21.00.15:
https://www.powerarchiver.com/2022/04/05/welcome-to-owerarchiver-2022/Thanks everyone for your assistance!
-
Hi,
I have a 31" 4K screen with 3840x2160 pixel, which PA is able to handle - except of a scaling other than 100%.
Access violation at address 0000000..DF47A4 in module 'powerarc.exe'. Schreiben of address 0000...00330.
When changing scaling for this screen to 125%, starting PA brings the following exception:After closing this message, PA seems to work fine.
PA version 21.00.15 (03/2022) 64bit (tested with Win 10 and after upgrade Win 11)Is there any chance to avoid this access violation or this message?
Thanks and regards,
Karsten -
Example file: http://www.kk5jy.net/smalldv-v1/Software/smalldv-1.0-beta-20180619a.txz
PA 21.00.13 doesn’t seem to see the contents unless I change the extension to .tar.xz
-
This are the steps :
in Options, select ‘configure clouds’ try now to quit this option…
No way, everything is locked up, the only way is using the task manager to quit PA.
(version 2021-20.10.02)
4205a809-353e-46f4-90ab-0bad062c2ccc-image.png -
When adding a file into an existing archive, in the add file window, if you click in the breadcrumb bar to navigate to a parent directory, the file list does not change. The directory Up button works.
Running x64 on Win 11
Image1.jpg
-
blue text over graphic: (graphic too low?)
PA210013About.png
(Running on 64 bit Windows 7) -
In PA 21.0.13, when I try to open an archive with the new Windows 11 context menu item “Open with PowerArchiver”, a PowerArchive instance is opened, but the archive is not loaded.
-
Hi,
the new Windows 11 context menu is not localized in PA 21.00.13.
While the classic context menu is localized, when it’s opened on a file on my desktop, it’s English, when it’s opened from a file on my C drive.@Mili Are there updated localization files available?
-
Hi,
I thought, I’ll give it a try and upgrade my PA 2018 Toolbox on my production machine to PA 2021 (20.10.03)
Sending registration codes in your order recovery doesn’t seem to work at the moment (I also checked my junk folder), online activation works Using registry to disable modules (for example HKLM\SOFTWARE\PowerArchiverInt\General\DisableBurning) doesn’t work as expected with modern ui. The module is visible, but I’ll get the trial nag, if I try to open it. It’s almost fine in classic and ribbon mode.7989017c-3cd2-4a99-a1f6-06ce62329dec-image.png
“DisableClouds” and “DisableExplorer” seem not to be respected at all, while the classic UI seems to respect the setting to disable any other unused module:
In settings I won’t be able to access the SmartAI settings and the settings for the internal editor if the FTP module is disabled
89843f23-ad89-45bf-92bc-406b1a11dfc9-image.pngcc40877b-d8d0-404c-b7f8-d5ae0a1ee445-image.png
-
PA Queue does not compress file optimally with same parameters if used in Queue mode.
Being able to save advanced option, and set a default profile and archive type for compression so I can save clicks.
The above two are majorly affecting my efficiency with archiving stuff with PA 20.10.03.
Can someone confirm if they are resolved with the 2022 RC1?
Fast Ring: PA 2016 16.10.23/24
-
New version: PA 2016 16.10.23/24
Download:
http://dl.powerarchiver.com/2016/powarc161024.exeWhat New:
- Added support for 3 different ZIP samples we have received that did not work previously due to bad headers.
- Added 4K support for display scaling.
Please test and let us know if everything works well. Thank you!
-
Whoa! There’s something funky going on with this build.
Installed fine but after installation It kept on restarting itself and I had dozens of PA starter icons in my notification area.
Had to restart my PC as I can’t stop it doing it. On restart I clicked on PA starter to start PA and the situation repeats itself.
Going to have to uninstall and go back a version.Windows 10 Home 64-bit
Intel Core i7 6700HQ @ 2.60GHz
12.0GB Dual-Channel DDR3 @ 798MHz -
@Luxor said in Fast Ring: PA 2016 16.10.23:
Whoa! There’s something funky going on with this build.
Installed fine but after installation It kept on restarting itself and I had dozens of PA starter icons in my notification area.
Had to restart my PC as I can’t stop it doing it. On restart I clicked on PA starter to start PA and the situation repeats itself.
Going to have to uninstall and go back a version.can you send me your .reg of HKCU\Software\PowerArchiverInt\
It seems something with PA starter… can you turn it off completely and start PA by launching via powerarc.exe or pa shortcut?
Thank you!
-
also, can you check the time of your powerarc.exe… it should be 3:38 PM (15:38).
pastarter.exe did not change since May.
-
@spwolf said in Fast Ring: PA 2016 16.10.23:
can you send me your .reg of HKCU\Software\PowerArchiverInt\
I had to restart and uninstall it as I couldn’t do anything
@spwolf said in Fast Ring: PA 2016 16.10.23:
It seems something with PA starter… can you turn it off completely
PA starter was my suspect, but I couldn’t turn it off or do anything with it, as the PA window was just popping up, off and on, over and over.
Going to install it again but I won’t activate PA starter, see how it goes.
-
Nope! Same problem and now I have the PA window flashing off and on, Just minus all the instances of PA starter in notification area.
-
ok, please send that .reg key so we can check it out with your settings… it is likely something with modern toolbar, are you using it? Since that was updated with new components with support for 4K resolutions. Thanks!
-
also, check time on powerarc.exe, it has to be 15:38… one from earlier did not work correctly, maybe it was left on some CDN server that you downloaded from. Thanks!
-
Gone back to PA16.10.21 and thankfully things are back to normal. Sorry that I couldn’t really do anything about that, as all those windows popping on and off just made it impossible to do anything.
@spwolf said in Fast Ring: PA 2016 16.10.23:
ok, please send that .reg key so we can check it out with your settings
Do you still want it now that I have had to go back to PA16.10.21?
@spwolf said in Fast Ring: PA 2016 16.10.23:
it is likely something with modern toolbar, are you using it?
I am indeed.
@spwolf said in Fast Ring: PA 2016 16.10.23:
check time on powerarc.exe, it has to be 15:38…
12:26 According to mine, but as I’ve had to go back to PA16.10.21 I don’t know if that’s right or not.
-
yes please to the .reg
Check file sizes of your installer .exe. This is what it should be:
-
@spwolf said in Fast Ring: PA 2016 16.10.23:
yes please to the .reg
On it’s way.
Damn! forgot to zip it, resending…
@spwolf said in Fast Ring: PA 2016 16.10.23:
Check file sizes of your installer .exe. This is what it should be:
Same here.
Windows 10 Home 64-bit
Intel Core i7 6700HQ @ 2.60GHz
12.0GB Dual-Channel DDR3 @ 798MHz -
@Luxor said in Fast Ring: PA 2016 16.10.23:
@spwolf said in Fast Ring: PA 2016 16.10.23:
yes please to the .reg
On it’s way.
Damn! forgot to zip it, resending…
@spwolf said in Fast Ring: PA 2016 16.10.23:
Check file sizes of your installer .exe. This is what it should be:
Same here.
better use .bh compression so it wont be rejected by google mail servers. Thanks!
-
@spwolf said in Fast Ring: PA 2016 16.10.23:
better use .bh compression so it wont be rejected by google mail servers. Thanks!
It’s that long since I’ve had to send it, I forgot the correct format.
Resending for a third time, -
@Luxor said in Fast Ring: PA 2016 16.10.23:
@spwolf said in Fast Ring: PA 2016 16.10.23:
yes please to the .reg
On it’s way.
Damn! forgot to zip it, resending…
@spwolf said in Fast Ring: PA 2016 16.10.23:
Check file sizes of your installer .exe. This is what it should be:
Same here.
i got the files but nothing bad happens.
It just startes PA as normal, with left treeview and Windows 10 skin. :(
-
got it, when i deleted my own HKLM keys, it started restarting!
do you maybe have saved key that you use to get your settings back during reinstallations?
-
@spwolf said in Fast Ring: PA 2016 16.10.23:
do you maybe have saved key that you use to get your settings back during reinstallations?
I have my config file if that’s what you mean. Do you want that sent?
Windows 10 Home 64-bit
Intel Core i7 6700HQ @ 2.60GHz
12.0GB Dual-Channel DDR3 @ 798MHz -
@Luxor said in Fast Ring: PA 2016 16.10.23:
@spwolf said in Fast Ring: PA 2016 16.10.23:
do you maybe have saved key that you use to get your settings back during reinstallations?
I have my config file if that’s what you mean. Do you want that sent?
it is likely whats causing the issue :)
Yes, please do send it!I suspect that Ivan had to change some part of it for new toolbar and it is causing problems now. It is very annoying :-)
Super happy that you are using it though!
-
@spwolf said in Fast Ring: PA 2016 16.10.23:
Yes, please do send it!
On it’s way.
@spwolf said in Fast Ring: PA 2016 16.10.23:
I suspect that Ivan had to change some part of it for new toolbar and it is causing problems now. It is very annoying :-)
Yes very annoying.
@spwolf said in Fast Ring: PA 2016 16.10.23:
Super happy that you are using it though!
Some folk are easily pleased. :-p
Windows 10 Home 64-bit
Intel Core i7 6700HQ @ 2.60GHz
12.0GB Dual-Channel DDR3 @ 798MHz -
@Luxor said in Fast Ring: PA 2016 16.10.23:
@spwolf said in Fast Ring: PA 2016 16.10.23:
Yes, please do send it!
On it’s way.
@spwolf said in Fast Ring: PA 2016 16.10.23:
I suspect that Ivan had to change some part of it for new toolbar and it is causing problems now. It is very annoying :-)
Yes very annoying.
@spwolf said in Fast Ring: PA 2016 16.10.23:
Super happy that you are using it though!
Some folk are easily pleased. :-p
@Luxor said in Fast Ring: PA 2016 16.10.23:
@spwolf said in Fast Ring: PA 2016 16.10.23:
Yes, please do send it!
On it’s way.
@spwolf said in Fast Ring: PA 2016 16.10.23:
I suspect that Ivan had to change some part of it for new toolbar and it is causing problems now. It is very annoying :-)
Yes very annoying.
@spwolf said in Fast Ring: PA 2016 16.10.23:
Super happy that you are using it though!
Some folk are easily pleased. :-p
I will see with ivan tomorrow, but he mentioned today in first build that some setting had to be changed due to new toolbar code, it is possible that this is done on first run after install, and when you restore settings it messes it up… so it is good that you are using it this way, and that the issue could surface.
-
I have removed the link since that restarting thing is very annoying… new version on Tuesday!
-
so due to some changes necessitated by upcoming 2017 release, language settings were left from 2017 portable version… result was that PA kept detecting language, changing it and restarting to apply but it was writing data into wrong registry key, hence infinite loop. Since we had 2017 version installed already, it worked fine internally, because all values were already there.
Simple problem, very annoying issue. New files are being uploaded right now, thanks everyone!
-
@spwolf said in Fast Ring: PA 2016 16.10.23:
Simple problem, very annoying issue. New files are being uploaded right now, thanks everyone!
At least you solved it quickly, no damage done. :)
Windows 10 Home 64-bit
Intel Core i7 6700HQ @ 2.60GHz
12.0GB Dual-Channel DDR3 @ 798MHz -
@Luxor said in Fast Ring: PA 2016 16.10.23:
@spwolf said in Fast Ring: PA 2016 16.10.23:
Simple problem, very annoying issue. New files are being uploaded right now, thanks everyone!
At least you solved it quickly, no damage done. :)
please try .24 from first post, and lets see what happens :-)
-
That one works fine. :)
