Hi everyone, some good news about PowerArchiver… I’ve managed to get in touch with the original developer of PowerArchiver, Ivan Petrovic, and he has confirmed that the product is not dead or abandoned, in fact it is still very much alive! There has been a hiatus over the past months for various reasons, but that we should expect to see stuff coming through in the coming months (hopefully the next 2 months).
The Windows 11 context menu for PowerArchiver on normal files (to be compressed, etc.) is now showing multiple tiers with two identical menus. See attached captures of the issue:
Screenshot 2025-01-08 082909.png
Screenshot 2025-01-08 082935.png
Screenshot 2025-01-08 082953.png
Edition Windows 11 Pro
Version 24H2
OS build 26100.2605
Hello!
I’ve just created SFX-Archives both from ZIP and 7z-Archives and none has an Icon as it seems.
I use the new version 22.00.11.
Zwischenablage_10-22-2024_01.jpg
Basically I used powerarchiver context menus to zip up a folder then i used windows 11 own built in zip extractor via the context menu to extract all and this is where it throw up a fault. , I’m using windows 11 .
The file that was a problem in the zip that windows 11 could not extract was iva “babe” cotton.jpg
I know it has non standard quotes in it.
However I had winrar on the computer and tried the exact same method with their context menu compress to zip and then I extracted the file with windows own extract all context menu and it had no problems. This indicates that powerarchiver is doing something different with iva “babe” cotton.jpg compressing to zip.
Then I changed iva “babe” cotton.jpg to iva babe cotton.jpg and compressed it with powerarchiver and then tried it with windows 11 extract all and had no problems. It looks like powerarchiver is doing something to that one file that has quotes in it.
Please note that powerarchiver extracted both zip files with no problems, only windows built in zip extraction had the fault. Reason I’m letting people know in case they send zip files with special characters in files names to people who do not have powerarchiver.
When will a fix be implemented?
On installing the program I am getting the error message:
"Unable to execute file c:\Program Files\PowerArchiver\pashutil.exe
CreateProcess failed: code 2
The system cannot find the file specified"
This can’t be right!
I am using the latest official build of Windows 11
Buttons are not properly aligned on About screen.
about window.png
Buttons not aligned on configuration window.
configbuttons.png
New version:
PowerArchiver 2023 - 22.00.10:
Download:
https://u.powerarchiver.com/pa2023/powarc220010.exe
New build for some bug fixes and issues - full list to come with new update. Please test and see if you have any issues.
Thanks everyone for your assistance!
New version:
PowerArchiver 2023 - 22.00.11:
Download:
https://u.powerarchiver.com/pa2023/powarc220011.exe
New build for some bug fixes and issues - full list to come with new update. Please test and see if you have any issues.
Thanks everyone for your assistance!
Just tried using the Modern (Windows 10) Icon set and seeing a few missing icons in both PowerArchiver Burner and PowerArchiver Encryption screens . They are all there in the Minimalistik icon set and the only difference I can see is the former is blue and the latter grey. In version 22.00.9
powerarc_2023-09-18_17-00-19.png
powerarc_2023-09-18_17-01-05.png
I had a large .tar file (a backed up WSL) and I want to delete a few directories and their contents from it using PA2023.
PA just destroys the whole archive as soon as I try to delete a directory, leaving it in a state where PA2023 won’t even open it any more.
I tried several times and also tried compressing it to .tar.xz instead - same result.
This should either actually work, or it should say operation not supported and do nothing.
Hello!
The regular version of PA 2023 is out for over 6 months now, but there is still no sign of the portable release.
(When) will there be one?
Thanks!
Hello!
Is there currently no portable version of PA2023 available?
(When) do you plan to release one?
Thanks!
Win 11 64 bit
I have some archives which have been encrypted, using the encrypt option either in pbs or when interactively creating a zip. When I open these, and look at files, I am asked for passwords, which I know, and then can view items or decrypt the files in the archive (tools>decrypt files).
However, when I use the Actions>Remove Archive Encryption (whether using the same zip or asking to write another), the routine shows progress bar to the end, but then just hangs i.e. “OK” never activates. All process information shows this stalled/hanging.
What can I do to sort this out?
For example:
Download this ZIP file: http://dslstats.me.uk/files/dslstats32W-6.5.zip
Everything in the ZIP file is in a directory “dslstats32W-6.5”.
However when I extract using right click “Extract Here” the name of the directory created is “2W-6.5” !
I am running PA 22.00.09 on Windows 11. I have seen the same happen with some other kinds of archive too.
PA is adding a password to my backup.
-
Usually when I create a backup I have them password protected so have not noticed this before. But I just wanted to create a quick backup of a folder and couldn’t be bothered to think of a password so created one without a password. It does this fine but if I run that same backup again Powerarchiver adds a password. That can’t be right can it ?
Try it yourself.
Start a new backup. Follow the wizard and add the folder that you want to back up. Untick the option to Encrypt archive with password. Finish and create the backup. Test it and it is fine.
Now re-run that backup either by double clicking the icon in explorer or via Powerarchivers interface. Then test it once again. You are now asked for a password even though you have not added one.
Luxor
-
how are you starting that original backup?
-
In PA interface via the New button - Create New Powerarchiver backup. Then just follow through to it’s conclusion.
-
can you send us PA registry key to support @ conex ware . com ?
it might be due to your saved settings (overwriting your selection in this case).
thanks!
-
Done.
-
did you get support ticket back?
-
No nothing yet.
-
still got zip, nil, zero…. thanks :-)
-
Is that a question or a comment spywolf ? :D
If question re support ticket then still nothing.
-
never got it… zip it and send it over again…
thanks
-
Re-sent. I Think I may have forgot to zip it last time. So that could be the reason for you not getting it. :o
-
Support ticket received.
-
got it, will check it out
-
Tested with your reg key,
“Encrypt” is checked by default every time I go through backup.
However, when i uncheck it my archives come out unecnrypted as they should.When running these scripts again, are you running them through windows explorer by clicking the pbs file or through the main PA window?
-
Normally I would run the scripts by clicking the pbs file in Explorer, but when I first noticed this problem I tried from Explorer and from the main PA window via the run icon.
If while in PA main window I use Backup > select to run and choose that backup, it brings up the Configure Backup Options screen and I can then uncheck it and then it comes out unencrypted.
-
if we uncheck the encrypt and run the backup, next time encrypt should be automatically unchecked in that same backup/pbs file… because last settings are always saved for backup.
-
That’s exactly the behaviour I was expecting. But it’s not doing that on my computer for some reason.
I have tried numerous times now, just creating test backups, unchecking the “Encrypt Archive With Password” option. Works fine but next time I run the pbs the password is back. :confused:
Been trying again and when the password prompt appeared when I tested my archive I typed in the password that I use for my main backup that I take every day (it was just a hunch). It accepted that password.
Tried again with another new pbs, same procedure as before. Once again the password I use for my everyday backup worked on opening that archive.
-
i should have quoted Mili :-).
I think it is not working right, from Mili’s description… it should save whatever setting was selected, but it seems that in your case it does not.
-
Luxor, for some reason your settings are such where the “encrypt” box is always checked even when unchecked in the previous run.
Therefore, when you run the script via Windows Explorer or Backup>Run, it will run it with “encrypt” checked. -
Luxor, for some reason your settings are such where the “encrypt” box is always checked even when unchecked in the previous run.
Therefore, when you run the script via Windows Explorer or Backup>Run, it will run it with “encrypt” checked.it is an bug, enter it into the buglist and attach his reg settings there so it can be reproduced.
-
Just tried in the new Beta PA 11.50.20 and this issue seems to be resolved. Will know better after a couple of days playing around with it. ;)