-
PA 2023 22.00.08
Long time no seeing. So I start up the new year with a first problem : the virtual driver cannot be installed. Reason : it is missing in the Fast Ring PatchBeam Update Service…
Virtual driver PA 2023-01-28 152607.png
It seems a standard problem with new releases :-)
Can I have a link or can it be fixed. Thank you. CU later -
When the function for testing archives is invoked via the shell context menu (PowerArchiver > Test) then all the files in the archive get extracted to the current folder.
The test dialog reports as many errors as there are files in the archive but it fails to give any hint as to which files are supposed to be erroneous or what the nature of the problem might be. Comparing the extracted files to the originals shows no differences at all.
The .7z in question was produced with maximised compression settings in 7zip (taking forever but resulting in smaller archives than .7z produced by PowerArchiver with maximised settings). Therefore I wanted to see whether PowerArchiver can at least test .7z that it produced itself. Hence I had PowerArchiver convert a .pa with the same contents to .7z. There weren’t any errors reported but the resulting .7z contained fewer than half of the files contained in the .pa (137 of 366), so I scratched that test.
Performance is abysmal when testing via the context menu (e.g. almost 2 minutes for testing a .7z that 7zip tests in 4 seconds), but that is most likely due to the fact that the extracted files are written to disk. Testing the same .7z in the PowerArchiver GUI takes only 8 seconds but causes the mysterious appearance of a UAC dialog, as reported elsewhere.
The testing function is vital because PowerArchiver has a history of producing archives that it cannot unpack without errors or that do not conform to the respective file format standards (e.g. ZIP) so that other programs report them as erroneous.
The point of creating archives is that the files in them will most likely have to be extracted at some point. If the extraction cannot be guaranteed to produce correct results then the whole program is absolutely pointless. Actually, worse than pointless - it causes data loss and hence damage.
-
In PowerArchiver 2023 22.00.06 configuration, the option labelled “Start PowerArchiver 2023 Starter when my computer starts” seems to be redundant.
I am only allowed to change this option when PA Starter is disabled, and then it seems to be ignored.
When I enable PA Starter this option is forced to the enabled state.
I think it’d be good to remove “Start PowerArchiver 2023 Starter when my computer starts” completely. I’ve always found it confusing having both options.
Added later: However i don’t particularly want to use queue but I do like having the PAStarter icon in my tray area.
-
W10 Pro 22H2 - 64 -bit
PA 22.00.06 (PA 2023)
It has been the case with previous versions of PowerArchiver, but I had hoped that the latest might behave differently. Not so, I’m afraid.
I have, for various obscure reasons, created a few .pa archives, mainly in the hope that they will save me some more space. From time to time, I use the “Test” option to check that important archives are OK and uncorrupted.
With every .pa archive I’ve tested, the process runs through OK but then reports that there are errors. This is always the number of files in the archive e.g. if 11 files, then 11 errors reported.
In the .pa, I can:-
preview the files (usually PDF) extract some or all files and look at or use them convert the .pa to a .zip or .zipx archive, which then works fine and tests without errorsIs it the case that the Test routine isn’t designed for .pa archives, or is there another reason? Although the .pa seems to function properly, despite the test reporting errors, I would like to be sure that every .pa is OK and not “broken”.
Some of the .pas are quite old and produced with earlier PA versions (they are truly “archives”). If I extract all the files in the old .pa, create a new, fresh .pa and add back the files to that, then test the new, no errors (at least in the .pa I’ve tried this on) are reported. This would suggest a mismatch between old .pas and newer versions of PA itself.
-
PA 21.00.18 running on Windows 7 64 bit.
I made a big .PA file and thought I’d check it was made correctly with Menu / Actions / Test.
Discovered:
a) PA always issues a UAC prompt to do this!
b) PA always says there are many errors in PA files. -
Clipboard02.jpg
See the, supposedly, blank space where the green box is? It’s like that in Modern Light theme too. I can toggle it, but it’s missing text or shouldn’t be there I guess?
Thanks :)
-
Dear @Alpha-Testers and all of our users,
time has come for testing of PowerArchiver and PACL for macOS.
Please let us know here if you have Mac and can test latest builds.Features implemented:
PowerArchiver 2020 - tabbing, opening, extracting, adding, testing, favorite folders, support for multiple languages, opening via Finder, explorer mode, installer.
PACL 10 - support for most formats and features in Windows version.Upcoming: Tools such as archive converter, batch zip, multi-extract.
To start testing, please sign up here in this thread, and we will send you latest build.
thank you!
Ashampoo_Snap_Wednesday, November 20, 2019_12h54m56s_008_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m05s_009_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m14s_010_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m30s_011_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m39s_012_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m49s_013_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h56m00s_014_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h54m43s_007_.png
76e97ab9-8d75-4175-9ce8-446500031f38-image.png
-
For some reason, the PowerArchiver functions in the Windows 11 context menu no longer work after the last Windows Update. Only the functions in the classic context menu function as they should.
I’ve tried uninstalling PowerArchiver and using RevoUninstaller to remove all bits and pieces that were left behind and did a clean install of PowerArchiver, it didn’t fix the issue. Other items in the Windows 11 context menu work.
Vista 5600 (RC1)
-
PA doesn’t work in this version either. Seems like they’ve kept the application model.
Also, RC1 is a ‘locked’ version of Vista build. Application model will not change any more so if you make it compatible for RC1 it will live up to release. -
I have the same problem. Seems like MS broke something in RC1
Guido
-
5600 is nice, isnt it? Quite nice.
-
Yes it is.
-
i’m using it as my primary os on my desktop and about half time on my laptop with no problems. (still using delphi 6 at work. doesn’t work so well in vista :))
-
I’m also using it as a primary OS as I just can’t get used back to XP :D
Btw, any fix on the horizon? Must be some small problem for PA to crash.
Also, I like the new Office interface, but Outlook HTML rendering seems to be broken.
Also it downloads images every damn time instead of saving those into the mail itself. -
I’m also using it as a primary OS as I just can’t get used back to XP :D
Btw, any fix on the horizon? Must be some small problem for PA to crash.
Also, I like the new Office interface, but Outlook HTML rendering seems to be broken.
Also it downloads images every damn time instead of saving those into the mail itself.its same as before - registration protection, kernel crash :-).
Should be fixed soon though. We will update 9.6x when that happens.
-
Why don’t you use your own protection instead of that silly thing. Cracks are anyway all over the Internet…
You loose more on incompatibility than you gain on protection…
Who wants to buy PA will do so anyway. Who doesn’t will use a keygen anyway.
-
Why don’t you use your own protection instead of that silly thing. Cracks are anyway all over the Internet…
You loose more on incompatibility than you gain on protection…
Who wants to buy PA will do so anyway. Who doesn’t will use a keygen anyway.
there are no keygens :-). Thats the whole point… with “our” protection, there were around 500 of them :-).
-
Hmm. I would expect a more underground knowledge from a developer. :)
Well, just xxx.xxx:) -
Hmm. I would expect a more underground knowledge from a developer. :)
Well, just xxx.xxx :)i still didnt find any keygens for PA2006… Just serials. There is an big difference there.
-
In any case, we should have support months before Vista is officially released.
thanks,
-
i still didnt find any keygens for PA2006… Just serials. There is an big difference there.
Which protection toolkit do you use?
-
Can’t wait till PA works in RC1 but I will miss the nice Zip icons MS made for archive files. Anyway to use PA and keep those?
-
Can’t wait till PA works in RC1 but I will miss the nice Zip icons MS made for archive files. Anyway to use PA and keep those?
sure - you can take them and use PA skins to set them as PA icons - quite easy, just skinning info on this website.
-
Thanks for the info. One more thing: I noticed that if you place a file within an archive, that Vista will prompt you to either cancel or overwrite. With PA, it inserts the new file, but also leaves the original file there too. Can PA be configured to overwrite the old files?
-
Thanks for the info. One more thing: I noticed that if you place a file within an archive, that Vista will prompt you to either cancel or overwrite. With PA, it inserts the new file, but also leaves the original file there too. Can PA be configured to overwrite the old files?
that depends on the path saved - if files have same path, it will be overwriten, if they dont - they it wont.
check archive in explorer view in PA in case you dont understand what I mean…
thanks,
-
OK, I’ve just installed the ‘vista ready’ 9.63 powerarchiver which does not work so I then uninstalled it but vista now does not know how to open standard zip files. Any ideas on getting that working?
-
OK, I’ve just installed the ‘vista ready’ 9.63 powerarchiver which does not work so I then uninstalled it but vista now does not know how to open standard zip files. Any ideas on getting that working?
right click on any file and select Send to> Compressed folder. I think thats what it is called.
Windows will then ask you if you want to re-associate with Compressed Folders.
-
I’m afraid that did not work any other ideas?
-
I’m afraid that did not work any other ideas?
did it actually ask you for the re-association? It just didnt work? Or?
-
Sorry should have made that clearer. I Right Clicked and sent a file to a compressed folder. The zip was created succesfully but I was not prompted about the association. Attempting to open the file prompts for you to choose a program to associate but it’s the os i’m trying to reassociate. Is there a version on the horizon that works with rc1?
-
Sorry should have made that clearer. I Right Clicked and sent a file to a compressed folder. The zip was created succesfully but I was not prompted about the association. Attempting to open the file prompts for you to choose a program to associate but it’s the os i’m trying to reassociate. Is there a version on the horizon that works with rc1?
Maybe I can create an .reg file for you to re-associate.
As to the Vista, YES, soon, I hope.
thanks,
-
Just choose Windows ‘explorer.exe’ as the program in ‘file association’ and check 'always use this program.
-
thanks, I can now double click and open a zip again. Now if i can just get the compressed folder icon back…
-
thanks, I can now double click and open a zip again. Now if i can just get the compressed folder icon back…
i have to find clean Vista installation, and when I do, I will attach an registry script that will do that…
-
Why does PA 2004 work but PA 2006 doesn’t?
Suppose its a bit like Nero in that way Nero 6.6.0.6 worked but the new 7 one didn’t.
Ok yes power archiver 2004 works fully on windows vista, you can download it here:
http://download.oldversion.com/powarc926.exe
Yes its a retail copy, no it does not have keygen, you can use trial. May be a slow download tho.
-
They use a component that doesnt work in Vista yet. They are waiting for a new version.
Guido
-
I’m a registered user of PA 2006 is there any way i can get hold of a key for PA 2004 as I am now using it on Vista RC1?
-
email us at support so we can give you reg number as well OR if you purchased PA 2004 or before, you can login to your account and you will still be able to get PA 2004 from there.
thanks,
