-
Powerarchiver 2022
Right-click and select Encrypt on a folder does not work.
Although it says it encrypts, there is no encrypted file in the destination folder. -
Re: Explorer.exe Crash on right click
This appears to be happening again with the Power Archiver 2022 shell extensions.
When I have Use Explorer Shell Extensions enabled in Power Archiver Configuration and right-click on c:\Users\username\Start Menu, (hidden Junction file), File Explorer crashes.
I have version 21.00.15 (03/2022) 64-bit installed in Windows 10 Version 21H2 (Build 19044.1826).
-
The online update feature within the program suggests there is a later version than the ‘.17’ available on the web site. But clicking either download or update just reinstalls version .17.
Either there isn’t an update OR
the “download” and 'update" links should be repaired. -
Hi Dear,
Cannot login and request resend license code for my fd
-
Hi,
When you click on the Buy Now link, you come across four tabs - Home or Work, Enterprise Unlimited, Educational Discount, & Gift Discount.
What is the difference between a licence purchased via Gift Discount and a Home/Work licence?
Also, how can I renew the PowerArchiver Select plan a year after the purchase? Will it remind me automatically?
Best,
-
I’m running PA 21.00.17 64-bit on a 64-bit i7 desktop with W10 Pro, latest version. This 32gb of installed RAM.
As I use the PA pbs system for a number of scheduled archiving operations throughout the day, PA Starter is set to load and run at system startup.
In the course of trying to identify some causes of slowness and bottlenecks in other processes, I notice that PA Starter (PAS) always runs at between 11% and 15% of CPU (see screenshot), usually at about 12-13%. This is by far the highest demanding process on the system, as shown by Task Manager. In Performance Monitor, PAS Average CPU is 8.32, with every other process at less that 1 i.e. in decimal places only.
Task Manager also shows PAS Power Usage as “Very High”, and is the only process shown thus.
I have looked again at the information about PAS at https://wiki.powerarchiver.com/en:help:details:powerarchiver_starter, which was last modified in 2016. The article states a low memory usage for PAS of 784k, which is fair enough, but it is the large CPU overhead which is of concern.
It is of course possible to change the PAS priority, but this has no effect on CPU overhead.
However, is it possible to change PAS, which is required only at intervals to initiate PA scheduled tasks, from consuming so much system resource for every moment of the day?
PA Starter.jpg
-
I’m experiencing very slow extraction speed of multipart RAR files. For the first part the extraction is super fast but when PA reaches the part2.rar the extraction from there on gets super slow. PA needed for a 6,3 GB multipart archive 30 minutes to extract. I tested then with another program and it just took 70 seconds. I had this slow extraction speed with PA for quite a long time and I always thought that is maybe because of a high compression rate that the extraction would take longer. But it seems that only PA gets that slow.
I have lots of multipart archives that are 10+ GB and with PA it would be really time consuming. Is there any solution to this?
-
Hi. The “Move” Action seems to be Not Working when used in the Tool – Batch Archive.
Using the Options – Configuration – Compression Profiles ---- I created a Profile with the Action of Move. Also set were Zip, and Method Deflate.
When I use the Tool - Batch Archive – It appears to me that the Action Move does not Move the compressed files (basically add to zip, and delete the added file from original location on the same disk). Zip file(s) are created and look ok.
Typically I on the Batch Archive process – I have selected options to use a Profile with the Move Action.
File’s Current Folder Group files from same folder into same archive Add subfolders to separate archivesMy PowerArchiver version is 21.00.17 .
Can you reproduce ? – Or do you need additional details or information?
-
Hello,
PowerArchiver Command Line 7 support file greater than 2 Go ?
Thanks
-
i just registered my own copy and i need some help to set it…
if i set the ‘configuration>shell extension>open folder after extracting’ checkbox, after decompress an archive is opened the file manager on that folder but… if somebody is using a different file manager how to open XYplorer or Directory Opus for example and NOT the MS file manager?
consider this as a feature request also if not available within the 2022 version
-
I am looking for a way to stop the UAC elevation prompt when running Powerarchiver. In an old post about PA 2019, someone asked this and got a response to uncheck “all users” at the prompt but I am not seeing where one can do this. It definitely seems like the way to go though as if I click on “More Details” at the prompt I see that it is trying to run “_pautil.exe /paassociate /allusers /my(long binary string)”. Can you let me know? Thanks.
PS I tried renaming _pautil.exe and this worked, but I don’t know what the consequence of doing this may be so I would like to do this properly, thanks.
-
Just a question is Ashampoo zip pro 4 built by Powerrachiver as it is very similar and uses the pae encryption.
-
Hi,
Is it possible to transfer one of my existing PC Licenses to my MacBook? -
Re: Transfer PC License to MacBook iOS
Here is the email…
On Tue, Jun 7, 2022 at 1:20 PM Rich DiBenedetto rmdibened@gmail.com wrote:
Greetings,
Could you assist me with this?
Can I use my current licenses with MacOS?
If not, can I transfer a license to MacOS?Cheers and Have a Great Day,
RichOn Wed, Dec 9, 2020 at 6:35 AM ConeXware, Inc. ordering@conexware.com wrote:
Dear Richard DiBenedetto,Thank you for supporting PowerArchiver! Please find your activation and registration codes below.
*** Online Activation ***
PowerArchiver Select for PowerArchiver Toolbox English - LIFETIME
is valid until - not limited.E-Mail: RMDibened@gmail.com
Activation Code: *** -
There would be many of us with Intel Processors.
and they have their own optimized zlib algorithm, which can result in more efficiency if used combined with their hardware processor.
Reference:
https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/zlib-compression-whitepaper-copy.pdfCan we get the same Functionality Under Hardware Acceleration Feature?
Zlib is not the only feature that intel has included with their processor, there’s many, which if combined can result in efficient and better compression ratios.
-
a686fe8c-93a1-4830-9d01-0b9a4edd9449-image.png
Right buttons are not visible
-
Greetings, new customer searching for help and/or refund…
-
With PowerArchiver context menu enabled, it is crashing Windows 10 File Explorer when right-clicking on the Default User junction in C:\Users. Had 2021 installed, updated to today’s 2022, still getting same crash. Must have Hidden files and folders set to Show, and Hide protected operating system files cleared in File Explorer Options|View.
Windows 10 Enterprise Version 21H2 (OS Build 19044.1708) (64-bit)
PowerArchiver 2022 Version: 21.00.15 (03/2022) 64-bit
Licensed:
PowerArchiver Toolbox Edition Personal EnglishDisabling PowerArchiver context menu using Autoruns: on the Explorer tab, uncheck PowerArchiver64 under HKLM\Software\Classes\Folders\ShellEx\ContextMenuHandlers and the crash does not happen.
-
Hello,
When clicking on the main ribbon for a new version I get a script error message.
Actual version: 21.00.15 - French version
OS: W10 21H2 19044.1645Best regards
WilfridPS: Keep building such good software
Bug not fixed in new version
-
Re: Using the Queue Feature affects Compression Ratio negatively
I’m sorry if the dev team is affected by pandemic, and if anyways that is affecting their quality to provide quality software.
But honestly, it’s been an year I have been complaining about the queue feature, it is taking them ages to fix.
referencing the above bug, I have been waiting patiently, but the bug isn’t fixed at all.
The old queuing bug where PA gets stuck randomly, isn’t fixed either.
The Bug where you keep 10-15 files in queue at once, will cause the software to miss few in queue.
and sometimes it would compress into a corrupt archive, so you have to manually open each archive and make sure everything is there as expected.
There’s way too many bugs, and I see none getting fixed.
I’m disappointed with this software.
I should have sticked to 7zip or given a shot to other archivers than this, at least they don’t provide update once in 4 months and fix nothing.
-
Hi,
thank you for the report. We (@Mili ) will investigate queue and PA format a bit better, I saw it mentioned in our issue reporting system. In this case, it seems all the options might not be passed to the queue as supposed to when you create file directly. Are the files the same if you do not change the dictionary size?
When it comes to 7z and other software, what kind of compression are you getting on the same file? Is there a difference?
thank you!
-
Honestly,
There’s not even a single guide to using this software, it’s just that if you know what you are doing you are at your own’s mercy.
I tried changing lots of options, including changing dictionary size to 128 MB.
keep PNG filter to reflate*7, and no filter for PNG files.
keep x64+deltab for exe and no filterEverything has same result, Using queue will make the files large
There’s another issue.
I tried to avert the queue feature.(Instead start all compression at once)
Make some 10 folders, with 10-15 files in each, small PNG, JPG, or anything u want. make total size somewhere 50 MB of each folder.
then keep all the folders in compression individually, and run all of them at once.
out of 10, the very first process will complete normally, rest all will have following resuults:
- either complete with no errors but the .pa archive will be corrupt with some 20-40% of total file’s size or empty.
- will give disk full error after some 10-15 secs
- if the first one completed while you tried to put up another one for archiving, it will go on as it should, but the rest process will have corrupt results.
Also, when I try to change directory from the selection tab, without using browse feature, to create folders.
The PA process runs, asks for admin rights, I give it, it creates folder if it does not exist, then it will give disk full error, and delete the empty folder, no compression is done.
-
Coming back after exact 30 days, there’s no update for the software.
Now the windows 11 is coming, so there will be huge delay due to migrating and making the code work with new OS.
I don’t expect the very features that I need to work to be fixed in this year’s patches.
-
@godlydevils said in Bug not fixed in new version:
Honestly,
There’s not even a single guide to using this software, it’s just that if you know what you are doing you are at your own’s mercy.
I tried changing lots of options, including changing dictionary size to 128 MB.
keep PNG filter to reflate*7, and no filter for PNG files.
keep x64+deltab for exe and no filterEverything has same result, Using queue will make the files large
There’s another issue.
I tried to avert the queue feature.(Instead start all compression at once)
Make some 10 folders, with 10-15 files in each, small PNG, JPG, or anything u want. make total size somewhere 50 MB of each folder.
then keep all the folders in compression individually, and run all of them at once.
out of 10, the very first process will complete normally, rest all will have following resuults:
- either complete with no errors but the .pa archive will be corrupt with some 20-40% of total file’s size or empty.
- will give disk full error after some 10-15 secs
- if the first one completed while you tried to put up another one for archiving, it will go on as it should, but the rest process will have corrupt results.
Also, when I try to change directory from the selection tab, without using browse feature, to create folders.
The PA process runs, asks for admin rights, I give it, it creates folder if it does not exist, then it will give disk full error, and delete the empty folder, no compression is done.
Please send us that archive compressed with .pa/normal and let us know what settings you used. Thanks.
-
@godlydevils said in Bug not fixed in new version:
Coming back after exact 30 days, there’s no update for the software.
Now the windows 11 is coming, so there will be huge delay due to migrating and making the code work with new OS.
I don’t expect the very features that I need to work to be fixed in this year’s patches.
There will be no changes needed on our side for Windows 11.
On PA side, we are releasing minor version update in next 10 days and we have started working on PA 2022. Thanks!
-
I cannot make a lengthy video for variety of errors that I encounter.
However, this is persistent error, let’s start with this.
https://youtu.be/Ar7qDIKvAn4
and the file that was archived.
https://docs.google.com/uc?export=download&id=1NnQ2DVttFarYhQEszd9R__oD63nxr6ZT
-
I will be honest with you.
You release minor versions because you fixed bugs, optimized performance/code.
,
You release major version because you added new features, made overhaul to the software, and it’s competitively better than old major release.However, all your releases had same bugs, same outcome, I hardly notice any difference between resulting compressed archives, there are no new algorithms, there’s no optimization or performance improvements, and no new features.
Many devs have made it a hobby to release new major versions to sell new software due to major upgrade.
also, don’t wish to go offtopic, but ConeXware’s Encryption suite has never been updated, it has same visual and operational bugs, yet you guys are selling it openly, without disclosing the fact that software is no longer supported.
I feel the same with this software.
P.S. commenting after 12 days, there’s no minor version update yet. as per your 10 days statement.
