-
I’m running PA 21.00.17 64-bit on a 64-bit i7 desktop with W10 Pro, latest version. This 32gb of installed RAM.
As I use the PA pbs system for a number of scheduled archiving operations throughout the day, PA Starter is set to load and run at system startup.
In the course of trying to identify some causes of slowness and bottlenecks in other processes, I notice that PA Starter (PAS) always runs at between 11% and 15% of CPU (see screenshot), usually at about 12-13%. This is by far the highest demanding process on the system, as shown by Task Manager. In Performance Monitor, PAS Average CPU is 8.32, with every other process at less that 1 i.e. in decimal places only.
Task Manager also shows PAS Power Usage as “Very High”, and is the only process shown thus.
I have looked again at the information about PAS at https://wiki.powerarchiver.com/en:help:details:powerarchiver_starter, which was last modified in 2016. The article states a low memory usage for PAS of 784k, which is fair enough, but it is the large CPU overhead which is of concern.
It is of course possible to change the PAS priority, but this has no effect on CPU overhead.
However, is it possible to change PAS, which is required only at intervals to initiate PA scheduled tasks, from consuming so much system resource for every moment of the day?
PA Starter.jpg
-
Hello,
PowerArchiver Command Line 7 support file greater than 2 Go ?
Thanks
-
i just registered my own copy and i need some help to set it…
if i set the ‘configuration>shell extension>open folder after extracting’ checkbox, after decompress an archive is opened the file manager on that folder but… if somebody is using a different file manager how to open XYplorer or Directory Opus for example and NOT the MS file manager?
consider this as a feature request also if not available within the 2022 version
-
I am looking for a way to stop the UAC elevation prompt when running Powerarchiver. In an old post about PA 2019, someone asked this and got a response to uncheck “all users” at the prompt but I am not seeing where one can do this. It definitely seems like the way to go though as if I click on “More Details” at the prompt I see that it is trying to run “_pautil.exe /paassociate /allusers /my(long binary string)”. Can you let me know? Thanks.
PS I tried renaming _pautil.exe and this worked, but I don’t know what the consequence of doing this may be so I would like to do this properly, thanks.
-
Just a question is Ashampoo zip pro 4 built by Powerrachiver as it is very similar and uses the pae encryption.
-
Hi,
Is it possible to transfer one of my existing PC Licenses to my MacBook? -
Re: Transfer PC License to MacBook iOS
Here is the email…
On Tue, Jun 7, 2022 at 1:20 PM Rich DiBenedetto rmdibened@gmail.com wrote:
Greetings,
Could you assist me with this?
Can I use my current licenses with MacOS?
If not, can I transfer a license to MacOS?Cheers and Have a Great Day,
RichOn Wed, Dec 9, 2020 at 6:35 AM ConeXware, Inc. ordering@conexware.com wrote:
Dear Richard DiBenedetto,Thank you for supporting PowerArchiver! Please find your activation and registration codes below.
*** Online Activation ***
PowerArchiver Select for PowerArchiver Toolbox English - LIFETIME
is valid until - not limited.E-Mail: RMDibened@gmail.com
Activation Code: *** -
There would be many of us with Intel Processors.
and they have their own optimized zlib algorithm, which can result in more efficiency if used combined with their hardware processor.
Reference:
https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/zlib-compression-whitepaper-copy.pdfCan we get the same Functionality Under Hardware Acceleration Feature?
Zlib is not the only feature that intel has included with their processor, there’s many, which if combined can result in efficient and better compression ratios.
-
-
Greetings, new customer searching for help and/or refund…
-
Hi Dear,
Cannot login and request resend license code for my fd
-
With PowerArchiver context menu enabled, it is crashing Windows 10 File Explorer when right-clicking on the Default User junction in C:\Users. Had 2021 installed, updated to today’s 2022, still getting same crash. Must have Hidden files and folders set to Show, and Hide protected operating system files cleared in File Explorer Options|View.
Windows 10 Enterprise Version 21H2 (OS Build 19044.1708) (64-bit)
PowerArchiver 2022 Version: 21.00.15 (03/2022) 64-bit
Licensed:
PowerArchiver Toolbox Edition Personal EnglishDisabling PowerArchiver context menu using Autoruns: on the Explorer tab, uncheck PowerArchiver64 under HKLM\Software\Classes\Folders\ShellEx\ContextMenuHandlers and the crash does not happen.
-
Hello,
When clicking on the main ribbon for a new version I get a script error message.
Actual version: 21.00.15 - French version
OS: W10 21H2 19044.1645Best regards
WilfridPS: Keep building such good software
-
when clciking on powerarchiver update from within powerarchiver we get a windows for the update but it nows sayes script errors. I think it could be due to windows update in windows 10 can you look into it. By pressing cancel it seems to be ok. It seems that the page being displayed as erros on it.
-
From within PA on the extract popup, buttons are hidden, I must resize the window to get access to the OK/Cancel buttons. Tried on the default notebook screen (Macbook M1 Max 14") as well as on my external monitor (4k).Screenshot_2022-05-12_10-02-10.jpg
-
Just uncompressed a RAR file that has a folder within, PA created the folder but the files inside are not being saved into folder because directory separator is a BACKSLASH (Windows style) instead of SLASH (macOS).Screenshot_2022-05-12_09-59-08.jpg
-
Ho già contattato il supporto con il modulo presente qui https://www.powerarchiver.com/it/contact/ da settimane ma non ho ricevuto riscontro e ora che ho aggiornato alla versione 21.00.15 ho notato che il problema persiste.
Quando clicco PDF Encrypt & Sign nel tab Crittografia appare la schemata riportata sotto come se mancassero le funzionalità.I’ve already contacted support with the form here https://www.powerarchiver.com/it/contact/ weeks ago but I haven’t received any feedback and now that I’ve updated to version 21.00.15 I’ve noticed that the problem persists.
When I click on PDF Encrypt & Sign in the Encryption tab the schematic below appears as if the functionality is missing.de9b4a2d-07e7-4323-a5a3-1b91e73dafc0-image.png
-
I have tried to burn a DVD with PowerArchiver 2022 Final, but it didn’t work because PA didn’t found the external DVD-Burner.
I have tried several burners from Sony, LG, Dell.
I have connected the burners with several USB-Ports but unfortunately without any success.
With other burning software, e. g. Nero, all burner worked perfect on each USB-Port.
The same problem occured with PA2018 and it was solved with an update, but I don’t remember the detailed software version.
Could you check the possibility of an bug, please?
Thank you for your support in advance!
Missing Explorer Shell entries PA 2021 20.00.56
-
W10 Pro 1909 64 bit
I admit I don’t often need to use the facility, but today I went to the right-click context in Windows Explorer, and found that none of the usual PA shell options, as set up and defined in Configuration>Shell (screenshot) were to be seen.
Looking at Sysinternals Autoruns, I notice that a couple of the PA shell context entries show a couple of DLLs PASHLEXT and PASHLEXT64 as missing (File Not found) - see screenshot. The highlighted error shows up for every occurrence of these files in the HKLM\Software\ shell keys.
Looking in Program Files \PowerArchiver, the files listed above are not present, but there are some similarly named (see screenshot). The files present are not very recently dated, but I feel that I have used the PA shell feature since their March 2020 dates. However, I cannot be sure of that.
Any advice welcome.
-
I’ve checked with 2021 and have set up the shell extensions in Config the same way you have, and they appeared fine when I right clicked a file.
How do they appear for you when you right click a file, with this setup?Thanks!
-
@Mili They don’t appear at all I.e. there is no PA entry offered.
-
@Mili I’ve had another look through this, and note the following:-
-
there are no right-click Explorer shell options offered for any file types, and this includes PA archive files .pa and .zipx - see screenshots
-
I’ve looked at the file associations for PA in Windows settings, and they look OK.
-
when, after opening several archives in PA, exiting and then starting PA again, there are no recent files listed in the “Open” dropdown - see screenshot
When I updated from 20.00.55 to .56, the update process via PA crashed on every attempt. I thought this might be due to Bitdefender blocking it, but this is not so. In the end, I downloaded .56 from the website and installed it from there and, it seems to me, most if not all these problems have ensued since that update.
I am not sure what else may be problematic, but so far, on this system and .56, they are:-
- missing icons on the Backup file screen (as reported in another thread here)
- missing shell entries
- missing recent file entries on archive “Open” button
-
-
I’m making some progress with this.
I have re-downloaded .56 from the website and reinstalled it over the top of the existing .56.
I now have PA appearing as an Explorer right-click set of options, Autoruns and the Nirsoft applications now no longer show missing .dlls, and the previously-missing files PASHLEXT.DLL and PASHLEXT64.DLL from Program Files\PowerArchiver are now back there, with a date of 20-9-2020.
The conclusion therefore is that the first installation of .56 by downloaded .exe rather than through the PA built-in Patchbeam service was corrupt.
Although I’m not absolutely sure that the shell choices are working exactly as they should, and I wonder why the Configuration>Shell Extensions right hand “To” pane self-populates with an unremovable “PowerArchiver 2019” entry (this appears in my first Configuration screenshot above), they seem to have at least returned.
I am therefore left with two (so far) unresolved problems, which are:-
- non-appearing toolbar icons in the Backup Files and Folder screen (other thread)
- no recent archive files showing in the Open dropdown.
Not sure why I’m finding these as an end-user when previously I was finding bugs as a Tester, but never mind.
One last question. In the case where any application reinstall appears to be a solution to a problem, my normal instinct is to completely uninstall, notwithstanding the chore of setting up preferences and re-registering purchased software all over again. However, I have on this occasion reinstalled “over the top”, mainly because I don’t want any problems with re-registering and so forth. What in these circumstances do PA think the best route?
-
@PA_Fan This feels as if your AV has removed the file for testing and then later whitelisted it. What AV are you using?
Same installer is in both Patchbeam and website, as long as it is same version.
-
@spwolf It’s Bitdefender, and it did indeed interrupt a previous update, at which point I whitelisted PA, and all was well.
I don’t think it was the AV, and I’m still puzzled as to why the PASHLEXT/64 DLLs were absent in the program folder (and reported as missing in all the Shell utilities from Nirsoft and Sysinternals) when the program was first installed, but reappeared when I re-ran the instal and the Shell entries were then available. I’ve been through the Bitdefender logs and Quarantine, and those files are not mentioned or there, and the only explanation seems to be that the first install failed to complete 100% for some reason, but not the AV.
I have found the reason for the missing Recent files in the Open dropdown is that Private Mode was enabled under Options (toolbar). I don’t think I set it so, but reversing it fixes that particular thing.
I’m left (I think) with the missing icons in the Backup section. Here, I’ve tried several more permutations of icons and skins, but I still have square, blank icon boxes. Not a big problem, as the titles appear on hover, and more a cosmetic thing, but it would be good to see the icons as well.
-
Hi @PA_Fan
We have the missing icons issue logged in and the devs will take a look to fix that. We will respond with further questions if needed.
Also, the Ribbon interface open button will not show an MRU menu at the moment. We have that logged in for implementation as well.
Thanks for all the information!
-
@Mili Thanks for the update, and you’re welcome.
I’ll wait to hear about the icons which, as I mentioned, I seem to recall having been a minor glitch in the past, but otherwise .56 is excellent.