-
PA Queue does not compress file optimally with same parameters if used in Queue mode.
Being able to save advanced option, and set a default profile and archive type for compression so I can save clicks.
The above two are majorly affecting my efficiency with archiving stuff with PA 20.10.03.
Can someone confirm if they are resolved with the 2022 RC1?
-
Hi,
I thought, I’ll give it a try and upgrade my PA 2018 Toolbox on my production machine to PA 2021 (20.10.03)
Sending registration codes in your order recovery doesn’t seem to work at the moment (I also checked my junk folder), online activation works Using registry to disable modules (for example HKLM\SOFTWARE\PowerArchiverInt\General\DisableBurning) doesn’t work as expected with modern ui. The module is visible, but I’ll get the trial nag, if I try to open it. It’s almost fine in classic and ribbon mode.7989017c-3cd2-4a99-a1f6-06ce62329dec-image.png
“DisableClouds” and “DisableExplorer” seem not to be respected at all, while the classic UI seems to respect the setting to disable any other unused module:
In settings I won’t be able to access the SmartAI settings and the settings for the internal editor if the FTP module is disabled
89843f23-ad89-45bf-92bc-406b1a11dfc9-image.pngcc40877b-d8d0-404c-b7f8-d5ae0a1ee445-image.png
-
I’m running W10 Pro on an HP i-7 machine with now 32gb of RAM. The system drive is an SSD.
In the course of sorting out some inconsistencies in a couple of my .pbs jobs, I’ve been paying close attention to the system CPU resource and power consumption of PA Starter, as shown by the various resource management tools. I’ve also been trying to identify why my system seems rather sluggish despite some extensive tuning for speed etc.
When I have enabled Starter as a start-up programme, to use the PA Queue facility, I see that Starter consistently uses between 10-13% of CPU, with High Power consumption indicated. It runs, consuming this resource, irrespective of what may be happening with PA and any pbs script jobs.
I can understand a need to use a good chunk of CPU when Starter is actually handling PA jobs, but it shouldn’t sit and consume this amount when it really isn’t doing anything but wait for a job to start and for which it is needed.
Perhaps I’ve missed a way of lessening Starter’s impact, but in the meantime I’ve adjusted my set-up to running PA without it.
Suggestions, please.
-
Bug: When I use the right button on any folder to bring up the menu and click on e.g. compress or decompress, the program still requires registration even if it is correctly registered. When working with the folder, via the running Power Archiver, everything is fine. (Windows 10 - v. 20.10.03)
-
Dear @Alpha-Testers and all of our users,
time has come for testing of PowerArchiver and PACL for macOS.
Please let us know here if you have Mac and can test latest builds.Features implemented:
PowerArchiver 2020 - tabbing, opening, extracting, adding, testing, favorite folders, support for multiple languages, opening via Finder, explorer mode, installer.
PACL 10 - support for most formats and features in Windows version.Upcoming: Tools such as archive converter, batch zip, multi-extract.
To start testing, please sign up here in this thread, and we will send you latest build.
thank you!
Ashampoo_Snap_Wednesday, November 20, 2019_12h54m56s_008_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m05s_009_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m14s_010_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m30s_011_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m39s_012_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h55m49s_013_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h56m00s_014_.png Ashampoo_Snap_Wednesday, November 20, 2019_12h54m43s_007_.png
76e97ab9-8d75-4175-9ce8-446500031f38-image.png
-
Hi,
The window size is suddenly “large” Resizing the window to normal size works for the current action, but isn’t remembered The next time I’m using the shell extension, the window is large again, so it seems the size change isn’t saved
I’ve got a strange behavior with the progress window in PowerArchiver 2021 shell extension:The progress window of PowerArchiver itself has its normal size.
Is there a possibility to reset the shell extension window size?
-
There would be many of us with Intel Processors.
and they have their own optimized zlib algorithm, which can result in more efficiency if used combined with their hardware processor.
Reference:
https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/zlib-compression-whitepaper-copy.pdfCan we get the same Functionality Under Hardware Acceleration Feature?
Zlib is not the only feature that intel has included with their processor, there’s many, which if combined can result in efficient and better compression ratios.
-
Windows 10 extraction does a better extraction job than Power Archiver which chooses not to work much of the time. I’ve tried uninstalling/reinstalling it
Version 20.10.03
-
The support doesn’t answer my email about a license question for weeks, because despite a lifetime license Powerarchiver refuses some functions
-
Scusate non so a chi rivolgermi, ho regolarmente pagato tramite Poy Pol ma non mi è pervenuto il codice di attivazione, ho quello vecchio ma presumo che non sia più valido, a chi devo rivolgermi?
Spero che mi possiate aiutare indicandomi cosa devo fare.
Grazie -
I have a “USB2.0” DVD-RW drive with a blank 700MB CD-R inserted.
Windows 10 sees in just fine explorer and it’s usable, and works.
However it is not showing in any dropdown in PowerArchiver.Thanks for any help…
PowerArchiver 20.10.02 (05/2021) 64-bit
Windows 10 Pro
20H2 build: 19042.1348
Windows Feature Experience Pack 120.2212.3920.0 -
I’m using 20.10.02. When I try to drag files from an opened zip to a folder in Windows File Explorer, PA does nothing. It uses a CPU core and starts the clock, but no action is taken. I have to end task in task manager to get it to close.
-
6e4196e6-d59c-4870-b27e-80c5ae60e4d7-image.png
see image. the bottom of yes and no are cut off
-
Will PA 2022 still support windows 10 as majority of people can’t upgrade and won’t till 2025
-
Hello,
PowerArchiver Command Line 7 support file greater than 2 Go ?
Thanks
-
I’ve found a bug when trying to test an encrypted, 28-volume 7-zip archive of a 18.3 GB folder containing 41,751 files. The test fails, showing errors in all files.
Here’s the folder I compressed, and the 28 resulting files:Archives
Here’s the multi-volume compressed file opened in PA, showing the total file count and the full archive size:Opened in PowerArchiver
And here’s the test results screen after I click Actions -> Test…, showing an incorrect file count and archive size (this seems to be the file size of the first volume alone):Testing results
One important detail about the test screen above is that PA opens an UAC prompt asking for privileged execution before starting the test. Is this the expected behavior? It seems PA wouldn’t need higher execution privilege since everything it’s touching is owned by my own user.
In any case, granting or denying the UAC prompt results in the exact same screen.
Now, if instead of testing the archive I tell PA to extract the contents, the operation works fine (and with no UAC prompts):Extracting
With the Properties panel for both folders, the original and the extracted one, showing the exact same file count and total size:Extract results
I hope this helps. 🙂
-
Hi,
Currently on the 2021 20.00.55, updated, and licensed.
I have been facing this issue since 2019 version.
Queues don’t actually do anything
That I run powerarchiver starter as admin, or without admin.Then I queue some files, and most of the files take forever, to go from 1% to 2%
and let’s say if the 5th of total 10 files are stuck that should mean the other 4 should be completed, but no, the directories are just like that.
Using Queue feature makes the Powerarchiver to process and compress files, but the PA archives do no appear, neither the disk’s total used space changes.
However if I manually compress files without queuing, no matter if I run multiple compression or one by one, there’s always success.
sometimes compression is stuck at certain percentage for a 50 or 200 MB file, forever.
I want to speed up multiple compression, I find the batch compression feature useless, as I cannot configure any custom parameters or advanced option under PA archive format
So, Let me save parameters(Advanced Option) of Profiles
i) Either I should be able to customize PA Default profile, so I don’t have to select files and manually select profile, but not even single parameter can be saved
ii) Or I should be able to create a new profile and be able to set that as default.
It’s end of 2020 and I have been trying to reach Powerarchiver team to add this, but no one wants to listen or do anything.Refer case PA-FCW-TLNFM-096
I still cannot save parameters under advanced options like DDL/EXE filter to delta, or PNG PDF Filter, or set zlib to 9 or dictionary size or experimental stuff.
Soo many Revisions and versions released but I still cannot have a profile saved with whatever I want, be it existing or new profile.
Don’t you guys at Powerarchiver labs get frustrated everytime you have to configure these parameters manually?
When I stop an ongoing compression process, that is stuck or let’s say it’s not stuck but I click on cancel and then on No, it still continues compression for no reason.
If I start compression and pause, the progress bar shortly(progresses) reaches to completion, but no compression is done, and then archive is stuck forever
Just cancel itFor all my claims above I have sent ticket today with screenshots from my registered email.
if you can:
Batch archive is good idea, but if I have multiple directories inside directories, then I want first child directory to have all of it’s subdirectory compressed to that same first child directory
Example
I have a folder in D:\pics
that folder has following folder
Cats
Dogs
FishesEach of the above folder has sub folder:
Black
White
Fluffy
ColorfulI want those sub folders(black, white, colorful, fluffy) not to be compressed individually, but the cats, dogs and fishes folders to be compressed individually
-
Dear PowerArchiver Team!
As I unfortunately found out, there is a big bug in Powerarchiver, which causes the compression rate to drop really significantly! I wonder if no one has noticed this yet? Are you guys still actively developing?
The following error occurs! (This is already as I find a blatant error!).ERROR:
File extensions and formats are not recognized automatically! If a file name e.g. Mütze.jpg is simply “renamed” in Mütze.txt, or
Mütze.png, Mütze.mp3, Mütze.pdf etc. each time a DIFFERENT compression algorithm is performed on the SAME FILE! Remember! The file extension was only renamed, so the file extension e.g. from .jpg to .txt is only by Rename changed! Just take a .jpg or .txt or .pdf file and change the file extension, you will see see this error! No headers are read automatically! Is this really wanted?Then the perfect compression algorithm can never be found and optimized by PowerArchiver? You should investigate this dramatic error once absolutely!Greetings from your trusty Konglomat!
Please stay healthy and make PowerArchiver more powerful than ever! I am looking forward to future updates! You are still awesome! Please keep up the good work! I love PowerArchiver, really more than just about anything!And will probably buy and use it for eternity!
-
Configuration:
Powerarchiver 2021 20.00.73
Windows 10 Education 10.0.19042 Build 19042When extracting gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf.tar.xz , Powerarchiver wrongly thinks some .exe files have a length of zero:
98773b3b-65c0-48fa-8cd4-d081b2e0adee-image.png
Once extracted:
D:\Temp\Powerarchiver\gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf\bin>dir *.exe Volume in drive D is DATA Volume Serial Number is 0E12-BCA2 Directory of D:\Temp\Powerarchiver\gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf\bin 2020-11-20 07:10 PM 1,391,599 arm-none-linux-gnueabihf-addr2line.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ar.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-as.exe 2020-11-20 07:41 PM 3,030,119 arm-none-linux-gnueabihf-c++.exe 2020-11-20 07:10 PM 1,389,293 arm-none-linux-gnueabihf-c++filt.exe 2020-11-20 07:41 PM 3,027,513 arm-none-linux-gnueabihf-cpp.exe 2020-11-20 07:10 PM 4,040,503 arm-none-linux-gnueabihf-dwp.exe 2020-11-20 07:10 PM 391,769 arm-none-linux-gnueabihf-elfedit.exe 2020-11-20 07:41 PM 0 arm-none-linux-gnueabihf-g++.exe 2020-11-20 07:41 PM 3,026,926 arm-none-linux-gnueabihf-gcc-10.2.1.exe 2020-11-20 07:41 PM 609,607 arm-none-linux-gnueabihf-gcc-ar.exe 2020-11-20 07:41 PM 609,607 arm-none-linux-gnueabihf-gcc-nm.exe 2020-11-20 07:41 PM 609,607 arm-none-linux-gnueabihf-gcc-ranlib.exe 2020-11-20 07:41 PM 0 arm-none-linux-gnueabihf-gcc.exe 2020-11-20 07:41 PM 2,165,533 arm-none-linux-gnueabihf-gcov-dump.exe 2020-11-20 07:41 PM 2,343,605 arm-none-linux-gnueabihf-gcov-tool.exe 2020-11-20 07:41 PM 2,450,233 arm-none-linux-gnueabihf-gcov.exe 2020-11-20 07:54 PM 9,605,899 arm-none-linux-gnueabihf-gdb.exe 2020-11-20 07:41 PM 3,028,997 arm-none-linux-gnueabihf-gfortran.exe 2020-11-20 07:10 PM 1,412,943 arm-none-linux-gnueabihf-gprof.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ld.bfd.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ld.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ld.gold.exe 2020-11-20 07:41 PM 25,546,567 arm-none-linux-gnueabihf-lto-dump.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-nm.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-objcopy.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-objdump.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-ranlib.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-readelf.exe 2020-11-20 07:10 PM 1,393,083 arm-none-linux-gnueabihf-size.exe 2020-11-20 07:10 PM 1,392,464 arm-none-linux-gnueabihf-strings.exe 2020-11-20 07:10 PM 0 arm-none-linux-gnueabihf-strip.exe 32 File(s) 67,465,867 bytes 0 Dir(s) 1,002,422,431,744 bytes freeWhen the same archive is being extracted from a git bash session (after having installed git 2.30.1 for Windows 64 bit version from git-scm.com), the .exe files are extracted as expected:
xz -k -d gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf.tar.xz tar xf gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf.tar cd gcc-arm-10.2-2020.11-mingw-w64-i686-arm-none-linux-gnueabihf/bin ll *.exe -rwxr-xr-x 1 User 197121 1391599 Nov 20 19:10 arm-none-linux-gnueabihf-addr2line.exe* -rwxr-xr-x 2 User 197121 1421598 Nov 20 19:10 arm-none-linux-gnueabihf-ar.exe* -rwxr-xr-x 2 User 197121 2028927 Nov 20 19:10 arm-none-linux-gnueabihf-as.exe* -rwxr-xr-x 2 User 197121 3030119 Nov 20 19:41 arm-none-linux-gnueabihf-c++.exe* -rwxr-xr-x 1 User 197121 1389293 Nov 20 19:10 arm-none-linux-gnueabihf-c++filt.exe* -rwxr-xr-x 1 User 197121 3027513 Nov 20 19:41 arm-none-linux-gnueabihf-cpp.exe* -rwxr-xr-x 1 User 197121 4040503 Nov 20 19:10 arm-none-linux-gnueabihf-dwp.exe* -rwxr-xr-x 1 User 197121 391769 Nov 20 19:10 arm-none-linux-gnueabihf-elfedit.exe* -rwxr-xr-x 2 User 197121 3030119 Nov 20 19:41 arm-none-linux-gnueabihf-g++.exe* -rwxr-xr-x 2 User 197121 3026926 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-10.2.1.exe* -rwxr-xr-x 1 User 197121 609607 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-ar.exe* -rwxr-xr-x 1 User 197121 609607 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-nm.exe* -rwxr-xr-x 1 User 197121 609607 Nov 20 19:41 arm-none-linux-gnueabihf-gcc-ranlib.exe* -rwxr-xr-x 2 User 197121 3026926 Nov 20 19:41 arm-none-linux-gnueabihf-gcc.exe* -rwxr-xr-x 1 User 197121 2165533 Nov 20 19:41 arm-none-linux-gnueabihf-gcov-dump.exe* -rwxr-xr-x 1 User 197121 2343605 Nov 20 19:41 arm-none-linux-gnueabihf-gcov-tool.exe* -rwxr-xr-x 1 User 197121 2450233 Nov 20 19:41 arm-none-linux-gnueabihf-gcov.exe* -rwxr-xr-x 1 User 197121 9605899 Nov 20 19:54 arm-none-linux-gnueabihf-gdb.exe* -rwxr-xr-x 1 User 197121 3028997 Nov 20 19:41 arm-none-linux-gnueabihf-gfortran.exe* -rwxr-xr-x 1 User 197121 1412943 Nov 20 19:10 arm-none-linux-gnueabihf-gprof.exe* -rwxr-xr-x 4 User 197121 2572182 Nov 20 19:10 arm-none-linux-gnueabihf-ld.bfd.exe* -rwxr-xr-x 4 User 197121 2572182 Nov 20 19:10 arm-none-linux-gnueabihf-ld.exe* -rwxr-xr-x 2 User 197121 4550029 Nov 20 19:10 arm-none-linux-gnueabihf-ld.gold.exe* -rwxr-xr-x 1 User 197121 25546567 Nov 20 19:41 arm-none-linux-gnueabihf-lto-dump.exe* -rwxr-xr-x 2 User 197121 1404945 Nov 20 19:10 arm-none-linux-gnueabihf-nm.exe* -rwxr-xr-x 2 User 197121 1531656 Nov 20 19:10 arm-none-linux-gnueabihf-objcopy.exe* -rwxr-xr-x 2 User 197121 1991350 Nov 20 19:10 arm-none-linux-gnueabihf-objdump.exe* -rwxr-xr-x 2 User 197121 1421598 Nov 20 19:10 arm-none-linux-gnueabihf-ranlib.exe* -rwxr-xr-x 2 User 197121 1163376 Nov 20 19:10 arm-none-linux-gnueabihf-readelf.exe* -rwxr-xr-x 1 User 197121 1393083 Nov 20 19:10 arm-none-linux-gnueabihf-size.exe* -rwxr-xr-x 1 User 197121 1392464 Nov 20 19:10 arm-none-linux-gnueabihf-strings.exe* -rwxr-xr-x 2 User 197121 1531656 Nov 20 19:10 arm-none-linux-gnueabihf-strip.exe*The same archive file does extract properly under a native Linux Ubuntu 20.04 system, or under Windows 10 using the WSL2 Linux subsystem using xz and tar.
-
Hi! I came across an issue when I tried to uninstall PowerArch 2013. I got an error “The specified account already exists” which broke the process. I got the same error when I tried to install the current version, without uninstalling the previous one.
So I can’t uninstall and I can’t install PowerArchiver. Any suggestions? OS Windows 8.1 x64.Dariusz
7zip - filename encrypt
-
After deleting a file from a .7z file, the filename encryption is lost. Files are still encrypted but visible when opening the .7z file.
Using Ver:12.10.05 (01/2012)
Windows 7(64) -
confirmed also in 12.50.03
-
Same here.
But a question.
I didn’t think you used to be able to delete single files in 7z? Or was that only with a solid archive?
-
Don’t know about a solid archive. This problem was in ver. 11.71.04. Upgraded in hopes it was fixed. Right now my only work around is to extract and re-compress using the ‘Encrypt filenames’ option.
-
yes in a ‘solid’ archive the ‘delete’ option is unavailable.
-
Sounds like the process in which is recompiles the archive doesnt include encrypting the names again.
PA team should have a new version out soon, it contains many bug fixe’s so its worth keeping your eye open and updating patchbeam so it checks on start.
-
yes in a ‘solid’ archive the ‘delete’ option is unavailable.
My observations:
1. If solid archive is selected in the 7-zip format and Optimized, LZMA or LZMA2 is selected, the Delete is unavailable.2. If solid archive is selected in the 7-zip format and Store is selected, the Delete is available.
3. If solid archive is selected in the 7-zip format and PPMd is selected, the Delete is unavailable, but the file names are NOT encrypted.
-
thenks guys! confirmd this one, logging it in!!
-
*thanks :)
-
I was initially perplexed when one user talked about exactlng a single file from a 7z file.
I thought that perhaps this was a new development.
I realize the problem is more complex.
Suppose. when I create an archive, I create a 7z file; then I can delete an individual file without a hitch (although it then no longer hides the names of the individual files – still a problem).
But I tried something else.
If I CONVERT the file from zipx to 7z, the option to delete an individual file is greyed out, whether it was a solid archive or not.
So perhaps there’s a hitch in the convert program (which is one of the great features of PA).
-
it is probably always solid in converter…
i also wonder if there should be some improvements to the converter?
-
Definitely, that would be nice. I would use 7z more often.
-
if you have any more ideas about converter, best time to make your voice heard in wishlist forums :-)
-
Well here we are almost 6 months later and 13.00.17 still does not have the fix. Not a happy camper that they forced me to upgrade and pay….
-
I think I must be misremembering the thread. My 7zip filenames are hidden until to enter the encryption key.
Is there some special way you are adding the files?
It is true that it doesn’t do it automatically from the shell (compress to 7 z) . . . but that is because (as far as I can tell, that is not an option when determining compression profiles.
BTW, I am still using 12.12.
-
Same here, works just as Socrates mentioned using 13.00.18.
How are you adding the files?
-
Also, PA will never force you to purchase an upgrade.
The upgrade notice in Patchbeam specifically noted that new codes were necessary, that’s all.
new registration codes can always be retrieved from your account at www.conexware.com/shopIf you’d like, we will gladly refund your latest order.
-
The original post was:“After deleting a file from a .7z file, the filename encryption is lost. Files are still encrypted but visible when opening the .7z file.” BTW, the archive is not solid.
Adding file is not the problem.
This has been confirmed by a few member.
Just tried it with 13.00.18 and the problem is still there.
-
Also, PA will never force you to purchase an upgrade.
The upgrade notice in Patchbeam specifically noted that new codes were necessary, that’s all.
new registration codes can always be retrieved from your account at www.conexware.com/shopIf you’d like, we will gladly refund your latest order.
Oh well, done is done. Shame on me.
-
The bug is still logged into our system from initial report. Going to put it on the next list of bugs to be taken care of, so let’s see what happens!
Thanks for bringing it up again! -
I can confirm as well.
Don’t know enough about 7zip to know if this is a common problem with non-solid 7 zip encrypted files, or if it is unique to PA.
-
fixed in latest Beta!
-
-
enjoy your vacation! :)
-
I checked this out. I had been a problem before version .22.
It is not a problem anymore.
-
If I convert an encrypted zipx file to a 7zip file, it doesn’t encrypt the 7z file. Perhaps it would be too difficult to do, but it if wasn’t, it would be a nice touch.
-
I cant see how it’s too hard to do as PA technicaly exports to a temp location and then re-compresses the folder into the required format.
If it can encrypt a file or folder’s names from scratch surely it should a convertion?
it sounds like there is a bug within the convertion tool itself.
-
lets give it a check :)
-
it seems to remove encryption completely when converting encrypted files
-
That’s why I found too. But perhaps there is no simple way to keep it.
But since you have to enter the encryption key to convert it . . . I thought it would be nice to use the same key for the new archive.
-
entered in the system, let’s see what’s up.
thanks guys! :) -
Converter does not know if files are encrypted or not. It is not that simple. Plus it could never possibly know the password of the file, so it would require input on each file.
-
I may well simply not understand.
However, PA has to know that it is encrypted since it asks me for the password before it can convert the file.
And, since it already “has” the password (I had to enter it) why couldn’t it use that password when creating the converted archive?
-
should be fixed in this version;
-
Earlier spywolf sent me an RC1 (5-6 days) ago. It was not fixed in that version.
Is this one different?
Is this available via patchbeam, or should I manually download it? Or is PB version close? (Manual install loses a number of settings.)
Or did you want me to check it for you before it goes to PB?
Thanks.
-
Earlier spywolf sent me an RC1 (5-6 days) ago. It was not fixed in that version.
Is this one different?
Is this available via patchbeam, or should I manually download it? Or is PB version close? (Manual install loses a number of settings.)
Or did you want me to check it for you before it goes to PB?
Thanks.
i have no idea what Mili is writing about, so best do nothing :-)
-
thanks for the clarification.
-
last issue spoken about in this thread is the loss of encryption when converting an archive, so common sense should say that it is that issue which Mili is referring to.
Works fine for me with this .23 -
This is new version PA 2012 RC1 13.00.24:
http://dl.powerarchiver.com/2012/powarc1300rc1.exeNow explicit SSL works on Our server (which is different server software), so please check with yours!
