From within PA on the extract popup, buttons are hidden, I must resize the window to get access to the OK/Cancel buttons. Tried on the default notebook screen (Macbook M1 Max 14") as well as on my external monitor (4k).Screenshot_2022-05-12_10-02-10.jpg
Ho già contattato il supporto con il modulo presente qui https://www.powerarchiver.com/it/contact/ da settimane ma non ho ricevuto riscontro e ora che ho aggiornato alla versione 21.00.15 ho notato che il problema persiste.
Quando clicco PDF Encrypt & Sign nel tab Crittografia appare la schemata riportata sotto come se mancassero le funzionalità.
I’ve already contacted support with the form here https://www.powerarchiver.com/it/contact/ weeks ago but I haven’t received any feedback and now that I’ve updated to version 21.00.15 I’ve noticed that the problem persists.
When I click on PDF Encrypt & Sign in the Encryption tab the schematic below appears as if the functionality is missing.
I have tried to burn a DVD with PowerArchiver 2022 Final, but it didn’t work because PA didn’t found the external DVD-Burner.
I have tried several burners from Sony, LG, Dell.
I have connected the burners with several USB-Ports but unfortunately without any success.
With other burning software, e. g. Nero, all burner worked perfect on each USB-Port.
The same problem occured with PA2018 and it was solved with an update, but I don’t remember the detailed software version.
Could you check the possibility of an bug, please?
Thank you for your support in advance!
Quando creo un archivio zip con un altro programma ad esempio Winrar se apro il file con Winrar vi sono visualizzati anche le date originali di Accesso e Creazione.
Se ottimizzo quel file zip con la funzione Ottimizza archivio di PowerArchivier (o creo un nuovo archivio) il file risultate non ha più le date originali di Accesso e Creazione.
C’è una opzione per preservare questi dati? (Non l’ho trovata nelle impostazioni del programma e ho già abilitato le opzioni “salva info complete cartella” presente in “Profili di compressione”)
When I create a ZIP archive with another program such as Winrar, if I open the file with Winrar, the original Access and Creation dates are also displayed.
If I optimize that zipper file with the Optimize Archive function of PowerArchivier (or create a new archive) the resulting file no longer has the original Access and Creation dates.
Is there an option to preserve this data? (I haven’t found it in the program settings and I have already enabled the “save complete folder info” options in “Compression Profiles”)
Upgraded from 2021 to 2022. Selecting ‘backup’ no scripts are showed. Only after editing and saving an existing script (explorer) it shows up in the PA backup folder.
So is the ‘backup’ icon to open the Backup screen only for creating ‘new’ ones. This means that you have to open ALL your old pbs files and to save them again… not user friendly.
No way to improve this ? Thank you.
PowerArchiver 2022 - Final Version - 21.00.15
Information about PowerArchiver 2022 - 21.00.15:
Thanks everyone for your assistance!
I have a 31" 4K screen with 3840x2160 pixel, which PA is able to handle - except of a scaling other than 100%.Access violation at address 0000000..DF47A4 in module 'powerarc.exe'. Schreiben of address 0000...00330.
When changing scaling for this screen to 125%, starting PA brings the following exception:
After closing this message, PA seems to work fine.
PA version 21.00.15 (03/2022) 64bit (tested with Win 10 and after upgrade Win 11)
Is there any chance to avoid this access violation or this message?
Thanks and regards,
the new Windows 11 context menu is not localized in PA 21.00.13.
While the classic context menu is localized, when it’s opened on a file on my desktop, it’s English, when it’s opened from a file on my C drive.
@Mili Are there updated localization files available?
I thought, I’ll give it a try and upgrade my PA 2018 Toolbox on my production machine to PA 2021 (20.10.03)Sending registration codes in your order recovery doesn’t seem to work at the moment (I also checked my junk folder), online activation works Using registry to disable modules (for example HKLM\SOFTWARE\PowerArchiverInt\General\DisableBurning) doesn’t work as expected with modern ui. The module is visible, but I’ll get the trial nag, if I try to open it. It’s almost fine in classic and ribbon mode.
“DisableClouds” and “DisableExplorer” seem not to be respected at all, while the classic UI seems to respect the setting to disable any other unused module:In settings I won’t be able to access the SmartAI settings and the settings for the internal editor if the FTP module is disabled
PA Queue does not compress file optimally with same parameters if used in Queue mode.
Being able to save advanced option, and set a default profile and archive type for compression so I can save clicks.
The above two are majorly affecting my efficiency with archiving stuff with PA 20.10.03.
Can someone confirm if they are resolved with the 2022 RC1?
I’m running W10 Pro on an HP i-7 machine with now 32gb of RAM. The system drive is an SSD.
In the course of sorting out some inconsistencies in a couple of my .pbs jobs, I’ve been paying close attention to the system CPU resource and power consumption of PA Starter, as shown by the various resource management tools. I’ve also been trying to identify why my system seems rather sluggish despite some extensive tuning for speed etc.
When I have enabled Starter as a start-up programme, to use the PA Queue facility, I see that Starter consistently uses between 10-13% of CPU, with High Power consumption indicated. It runs, consuming this resource, irrespective of what may be happening with PA and any pbs script jobs.
I can understand a need to use a good chunk of CPU when Starter is actually handling PA jobs, but it shouldn’t sit and consume this amount when it really isn’t doing anything but wait for a job to start and for which it is needed.
Perhaps I’ve missed a way of lessening Starter’s impact, but in the meantime I’ve adjusted my set-up to running PA without it.
RAR: Adding missing file
1. create a spanned archive. (.part01… .part04)
2. move the latest file to a different folder.
3. extract archive. It will ask for the .04 file
4. move file to .04 file to the proper folder
5. press ok
PA is now asking for another file. Which there isn’t
Tested this on 61.01
you run some very strange scenarios 'guido but very effective indeed…:)
you run some very strange scenarios 'guido but very effective indeed…:)
it looks like a strange scenario. But I was extracting while some files still had to be downloaded. During extraction the missing file was added.
just for fun. Try the same thing with & in the filename.
up to now I haven’t been able to reproduce your first report but I will test again before conceding defeat…:)
I still can’t get this to happen…tried with several sized spanned archives.
firstly I created an archive with 34 parts to it and placed part 34 on my desktop and then obviously asked for part 34 whilst trying to extract…I replaced the missing part and told it to continue and it did without any faults at all…also tried removing one of the middle parts of the archive and it too worked fine.
the only problem I did encounter was when trying to do this via the context menu and not the main GUI…
I was hit with a ‘Not Responding’ message after replacing the missing part.
so either I’m not having this issue or I’ve done something wrong…:confused:
also tested on v11.61.01
we got it…
let us know if it has been fixed. Thanks!
Not fixed. still get the message "insert volume 2 c:\windows\system32\E
Also my progressbar says current file: E
I must remind you this is windows 7 x64
this is the error I get when I put one file back, but the next file is missing.